Day 2 Presentation topic on Arduino

1. PRESENTED BY:
Yogendra Tamang, WRC
48yogen@gmail.com

2. SOFTWARE REQUIREMENTS
Arduino IDE

3. INTRODUCTION TO ARDUINO
- Open Source Hardware and Software Platform
-Self Contained Computer in an IC
INTEL 286
Arduino Diecimila

4. INTRODUCTION TO ARDUINO
- Based on AVR microcontrollers that are widely
popular for their RISC architecture, hight flash
memory, inbuilt different features
- Arduino Uses C programming(E A S Y)……

5. WHY ARDUINO?
- Inbuilt ADC, Serial Interface, PWM, IO pins
-Programming so easy……(Can be used available
libraries)
-Open Source platform

6. HARDWARE
I/O PORTS ========== 14
PWM ========== 6
Analog ========== 6
8 bit =======256
10 bit ======= 1023
ADC

7. DIFFERENT B0ARDS
DUE
ELEVEN
UNO

8. DIFFERENT B0ARDS
DUE
LILYPAD MEGANANO

9. ARDUINO PROGRAMMING BASICS
Void setup()
{
//your initialization code
}
GLOBAL Variables
1.
2.
Void loop()
{
//your repeating code
}
3.

10. Functions used in
setup()1. pinMode(13, OUTPUT); makes pin 13 as output pin
2. pinMode(8, INPUT); makes pin 8 as input pin
3. Serial.begin(9600) ; starts serial communication
with Baudrate 9600
Functions used in loop()
1. digitalWrite(13, HIGH): makes pin 13 high ie pin13=ON;
2. delay(500) : delays system by 500 ms.
3. analogRead() : Reads analog value
4. analogWrite() : writes anlog value(PWM)
5. Serial.print() : Prints at serial monitor
6. Serial.println() : prints at serial monitor with line break

18. Reads Analog Value
Writes Analog Value at PWM PINS
Mapping Digital data in Certain Range

19. CONNECTION:
DIGITRONIX
POT=====A0

21. LED Brightness control using POT

26. Group 1:
Interface Ultrasound and display various distances
Group 2:
Interface IR sensor and use it for obstacle detection of the range 10 to 20 cm
Group 3:
Use PIR sensor for the motion detection and make sound at buzzer on
detection of the motion

32. Connection of Android phone and Arduino
PlatformSensors in Android like (G sensor, GPS,
Microphone) with advanced software platform can
be united to produce advanced prototypes.

34. ETHERNET SHIELD W/MICRO-SD
READER

35. EXTREME SHIELD STACKING

36. BLUETOOTH TO TTL 5V MODULE

37. USB TO TTL MODULE

38. RS-232 TO TTL MODULE

39. REVIEW:
Sensor Interfacing
LCD interfacing
Serial programming
PWM programming