Scotgrip Product Brochure

Manufacturers of heavy duty, Ref: SCGR Intro
Issue No: 1
anti-slip safety products Issue Date: Mar 2010
Page No: 1 of 2

Providing safety solutions to industry

Scotgrip (UK) Limited are manufacturers of high quality, heavy duty anti-slip safety products
for stairways, walkways, decks, ladders, ramps and gangways and is well established as the
leading force in heavy duty, anti-slip safety products primarily for drilling rigs, oil and gas
production platforms, marine vessels and paper mills worldwide.

In the workplace, ‘Slips and Trips’ make up one of the Be assured our standards are high and the safety of
highest accident statistics. Our products are uniquely your personnel is paramount.
designed to eliminate these accidents even in the
harshest working environments. • Eliminates ‘Slips and Trips’
• Cost effective
Scotgrip® safety products incorporate the unique • High traction anti-slip safety products
Scotgrip® high-traction, anti-slip safety surface
• Tough and durable
which gives a sound foot-holding in the most extreme
• Standard sizes and custom made
conditions. These tough and durable products are
• Fully guaranteed
manufactured under BS EN IS0 9001:2008 quality
• Fire rated, spark and friction tested
controlled conditions comprising of a reinforced
• Non corrosive
composite base and a graded aggregate surface.
• Easy to fit
As a Scotgrip® quality standard, these products are fire
• Reflects positively on personnel performance
rated, spark and friction tested.

FQM
Facilitators Quality Management

No. 23136 No. 10041261

Scotgrip® Anti-Slip Safety Products

Step into a safer environment with Scotgrip®

Safety for Stairways High-traction anti-slip
Product Code Scotgrip® safety products will provide a sound foot-holding even in the most
Premier Stair Nosing SSN extreme conditions and will eliminate ‘Slips and Trips’ in your working environment.
Footsure Stair Nosing FSN
Surface grades: High Profile – 6mm aggregate (1/4” approx.)
Safegrip® Stair Nosing GSN
Low Profile – 3mm aggregate (1/8” approx.)
Premier Stair Tile SST Fine Profile – 1mm aggregate (1/16” approx.)
Kicker Tread® KTS
Highly visible
Safety for LADDERS Colour coded in a wide range of colour schemes to suit individual locations.
Product Code Colour codes are: safety yellow, black/safety yellow, black,
Ladder Rung Covers (Square) LRCS green, grey, blue, red, white.
Ladder Rung Covers (Round) LRCR fluorescent and photoluminescent finishes
Other colours available – please ask.
Safety for walkways and Decks
Heavy duty
Product Code Scotgrip® safety products are extremely durable and remain highly effective
Grating Cover Tile SGCT for many years.
Decktile SDT
Weld Decktile SWDT Standard sizes or to customer specification
Flextile IFTS Scotgrip® safety products are manufactured in a wide range of standard
Drillmate® SDM sizes. We regularly manufacture custom sizes to suit individual locations.

Safety for BRIDGES/RAMPS Ease of installation
Product Code Scotgrip® safety products are designed for quick and secure fitting, either by
Pipe/cable bridge PCB1 to PCB5 mechanical fixings, welding or bonding to existing surfaces. These products are
(5 different sizes) pre-drilled where required for quick installation. Scotgrip® products are non-load
General Purpose Ramps GP1 to GP4 bearing and must have a suitable underlying structure to be secured to.
(4 different sizes) We recommend our own fastening systems and adhesives for securing Scotgrip®
Stepmate Custom Please advise design req’d anti-slip safety products

Safety for GANGWAYS Quality – it’s what dRIves us
All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
Product Code
controlled conditions using highly compatible raw materials at our premises
Gangway Tread (Step) GW1
in Banchory, UK.
Gangway Tread (Bar) GW2
Gangway Tread (Elliptical) GW3 FURTHER SCOTGRIP ® PRODUCTS
This data sheet is an introduction to the full Scotgrip® anti-slip product range that
we manufacture. If you would like individual product details/sizes, please refer to our
GW1 GW2 GW3
datasheets for each product. These can be found under the Datasheets heading on
our website: www.scotgrip.com
SIGNALERT SAFETY MARKING
The ‘SignAlert’ safety marking system can
be added to virtually all Scotgrip® anti-slip scotgrip ® ordering/enquiry information
safety products. When ordering Scotgrip® anti-slip safety products, please send us the following details:

PHOTOLUMINESCENT FINISHES Product Type:
Quantity:
We can offer
long lasting Size:
photoluminescent
Colour:
properties as an
extra safety feature Surface grade:
If fixings are required, please advise which type of surface you are securing to:
For installation details, please go to the Technical section of (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

For further advice or information contact:
Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road,
Banchory, Kincardineshire AB31 5YR, UK
Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300,
Houston, Texas 77042, USA
Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) Limited
Scotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®
e-mail: info@scotgrip.com website: www.scotgrip.com
anti-slip safety products as part of a continuous programme of improvement and innovation. Registered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun Bradstreet)

Scotgrip® Anti-Slip Safety Products Ref: SCGR Intro Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR Premier
Issue No: 1
Page No: 1 of 2


Scotgrip® Premier stair products incorporate the unique Scotgrip® high-traction anti-slip safety
surface which gives a sound foot-holding in the most extreme conditions. These tough and
durable products are manufactured under BS EN IS0 9001:2008 quality controlled conditions
comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip®
quality standard, these products are fire rated, spark and friction tested.

The leading edge of a step is the most dangerous part, • Eliminates ‘Slips and Trips’
especially if it has been damaged, worn smooth or • Cost effective
rounded by constant use. By installing Scotgrip Premier ®
• High traction anti-slip safety products
stair products not only is this slip hazard eliminated but • Tough and durable
the lifespan of the step is greatly increased. These heavy • Standard sizes and custom made
duty products are easily fitted onto open grating/grille, • Fully guaranteed
chequered plate, concrete or wood. • Fire rated, spark and friction tested
• Non corrosive

Call us with your requirements. • Easy to fit over existing steps
Eliminate ‘Slips and Trips’ on your stairways. • Reflects positively on personnel performance

FQM

No. 23136 No. 10041261

Stairways - Premier


PRODUCTS Code High-traction anti-slip
Scotgrip® Premier anti-slip stair nosing SSN Scotgrip® Premier stair products will provide a sound foot-holding even in the most
Scotgrip® Premier anti-slip stair tile SST extreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.)
FITTING DATA Low Profile – 3mm aggregate (1/8” approx.)
Fine Profile – 1mm aggregate (1/16” approx.)
Fitting onto: Method
Open grating/grille Type ‘S’ fixings Highly visible
(saddle assemblies) Colour coded in a wide range of colour schemes to suit individual locations.
Chequered plate Self tap screws or nut, Colour codes are: safety yellow, black/safety yellow, black,
bolt and washer green, grey, blue, red, white.
Concrete HPS impact fixings fluorescent and photoluminescent finishes
Wood screws or adhesive Other colours available – please ask.

Heavy duty
FIXING HOLE POSITION Scotgrip® Premier stair products are extremely durable and remain highly effective
If fixing holes are to be pre-drilled the following information for many years.
is required:
Standard sizes or to customer specification
Scotgrip® Premier stair products are manufactured in a wide range of standard
sizes (see table opposite). We regularly manufacture custom sizes to suit
individual locations.

Ease of installation
Scotgrip® Premier stair products are designed for quick and secure fitting, either by
mechanical fixings or bonding to existing surfaces. These products are pre-drilled
where required for quick installation. Scotgrip® products are non-load bearing and
We recommend our own fastening systems for must have a suitable underlying structure to be secured to.
securing Scotgrip® products.
Quality – it’s what dRIves us
standard sizes All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
BREADTH (DEPTH) in Banchory, UK.

mm 40 80 100 130 160 200 260
inches 11/2 3 4 5 6 8 10
FURTHER SCOTGRIP ® PRODUCTS
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔ If you would like to view the full Scotgrip® anti-slip safety product range that we
L en g th

manufacture, please look at our website: www.scotgrip.com where you will find all
600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔ of our available products and details.
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔

Custom sizes also available. Standard lip size on stair
nosing is 30mm (1 approx.) scotgrip ® ordering/enquiry information
When ordering Scotgrip® anti-slip safety products, please send us the following details:

For installation details, please go to the Technical section
Product Type:
of our website: www.scotgrip.com Quantity:
Size:
Colour:
Surface grade:
(e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Stairways - Premier Ref: SCGR Premier Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR Footsure
Issue No: 1
Page No: 1 of 2


Scotgrip® Footsure stair nosings incorporate the unique Scotgrip® high-traction anti-slip safety

The leading edge of a step is the most dangerous part, • Eliminates ‘Slips and Trips’
especially if it has been damaged, worn smooth or • Cost effective
rounded by constant use. By installing Scotgrip Footsure ®
stair nosings not only is this slip hazard eliminated but • Tough and durable
the lifespan of the step is greatly increased. These heavy • Standard sizes and custom made
duty products are easily fitted onto open grating/grille, • Fully guaranteed
chequered plate, concrete or wood. • Fire rated, spark and friction tested
• Non corrosive


FQM

No. 23136 No. 10041261

Stairways - FSN Footsure


PRODUCTS Code High-traction anti-slip
Scotgrip® anti-slip Footsure stair nosing FSN Scotgrip® Footsure stair nosings will provide a sound foot-holding even in the most
extreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Fitting DATA Surface grades: High Profile – 6mm aggregate (1/4” approx.)
Fitting onto: Method Fine Profile – 1mm aggregate (1/16” approx.)
Open grating/grille Type ‘S’ fixings
(saddle assemblies) Highly visible
Chequered plate Self tap screws or nut, Colour coded in a wide range of colour schemes to suit individual locations.
bolt and washer Colour codes are: safety yellow, black/safety yellow, black,
Concrete HPS impact fixings green, grey, blue, red, white.
Wood screws or adhesive fluorescent and photoluminescent finishes

Fixing hole position Heavy duty
If fixing holes are to be pre-drilled the following Scotgrip® Footsure stair nosings are extremely durable and remain highly effective
information is required: for many years.

Scotgrip® Footsure stair nosings are manufactured in a wide range of standard
sizes (see table opposite). We regularly manufacture custom sizes to suit individual
locations.

Scotgrip® Footsure stair nosings are designed for quick and secure fitting, either by
must have a suitable underlying structure to be secured to.
We recommend our own fastening systems for securing
Scotgrip® products.
STANDARD SIZES controlled conditions using highly compatible raw materials at our premises
in Banchory, UK.
BREADTH (DEPTH)

mm 40 80 100 130 160 200 260 FURTHER SCOTGRIP ® PRODUCTS
inches 1 /2
1
3 4 5 6 8 10 If you would like to view the full Scotgrip® anti-slip safety product range that we
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔ manufacture, please look at our website: www.scotgrip.com where you will find all
Length

of our available products and details.
600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔
scotgrip ® ordering/enquiry information
Custom sizes also available.
Standard lip size on stair nosing is 30mm (1 approx.) When ordering Scotgrip® anti-slip safety products, please send us the following details:
Product Type:
For installation details, please go to the Technical section of Quantity:
Size:
Colour:
Surface grade:

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Stairways - FSN Footsure Ref: SCGR Footsure Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR Safegrip
Issue No: 1
Page No: 1 of 2


Scotgrip® Safegrip® stair nosings incorporate the unique Scotgrip® high-traction anti-slip
safety surface which gives a sound foot-holding. These tough and durable products are
manufactured under BS EN IS0 9001:2008 quality controlled conditions comprising of a
reinforced composite base and a graded aggregate surface. As a Scotgrip® quality standard,
these products are fire rated, spark and friction tested.

The leading edge of a step is the most dangerous • Eliminates ‘Slips and Trips’
part, especially if it has been damaged, worn smooth • Cost effective
or rounded by constant use. By installing Scotgrip ®
Safegrip® stair nosings not only is this slip hazard • Tough and durable
eliminated but the lifespan of the step is greatly • Standard sizes and custom made
increased. These products are easily fitted onto open • Fully guaranteed
grating/grille, chequered plate, concrete or wood. • Fire rated, spark and friction tested
• Non corrosive


FQM

No. 23136 No. 10041261

Stairways - Safegrip®


PRODUCT Code High-traction anti-slip
Scotgrip Safegrip anti-slip stair nosing
® ®
GSN Scotgrip® Safegrip® stair nosings will provide a sound foot-holding and will
eliminate ‘Slips and Trips’ in your working environment.

FITTING DATA Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)

Fitting onto: Method Highly visible
Open grating/grille Type ‘S’ fixings Colour coded in a wide range of colour schemes to suit individual locations.
(saddle assemblies) Colour codes are: safety yellow
Chequered plate Self tap screws or nut, Other colours available – please ask.
bolt and washer
Concrete HPS impact fixings Standard sizes or to customer specification
Wood screws or adhesive Scotgrip® Safegrip® stair nosings are manufactured in a wide range of standard
individual locations.
FIXING HOLE POSITION
If fixing holes are to be pre-drilled the following information
is required: Scotgrip® Safegrip® stair nosings are designed for quick and secure fitting, either by

in Banchory, UK.

Scotgrip® products. If you would like to view the full Scotgrip® anti-slip safety product range that we
standard sizes

BREADTH (DEPTH)

mm 40 80 100 130 160 200 260
inches 11/2 3 4 5 6 8 10
450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔
L en g th

600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔
750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔
900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔
1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔

Custom sizes also available. Standard lip size on stair nosing When ordering Scotgrip® anti-slip safety products, please send us the following details:
is 30mm (1 approx.)
Product Type:
Quantity:
For installation details, please go to the Technical section of
our website: www.scotgrip.com Size:
Colour:
Surface grade:

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Stairways - Safegrip® Ref: SCGR Safegrip Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR KTS
Issue No: 1
Page No: 1 of 2


Scotgrip® Kicker Tread® incorporate the unique Scotgrip® high-traction anti-slip safety surface which gives a
sound foot-holding in the most extreme conditions. These tough and durable products are manufactured under
BS EN IS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded
aggregate surface. As a Scotgrip® quality standard, these products are fire rated, spark and friction tested.
Scotgrip® Kicker Tread® has the added feature of a safety ‘Kicker’ incorporated at the rear of the tread.

The leading edge of a step is the most dangerous part, Call us with your requirements. Eliminate
especially if it has been damaged, worn smooth or ‘Slips and Trips’ and ‘Objects dropping
rounded by constant use. The rear edge of a step can from a height’ on your stairways.
also be a concern if objects can be dropped or kicked
over accidentally and fall below. By installing Scotgrip®
• Eliminates ‘Slips and Trips’
Kicker Tread® not only is this slip hazard and objects
• Eliminates ‘Objects dropping from a height’
dropping from a height eliminated but the lifespan of the
• Cost effective
step is greatly increased.
These heavy duty products are easily fitted onto open • Tough and durable
grating/grille, chequered plate, concrete or wood. • Manufactured to customer specification
• Non corrosive
• Easy to fit over existing steps
FQM

No. 23136 No. 10041261

Stairways - KTS Kicker Tread®


Scotgrip® anti-slip Kicker Tread® KTS Scotgrip® Kicker Tread® will provide a sound foot-holding even in the most extreme
conditions and will eliminate ‘Slips and Trips’ and ‘Objects dropping from a height’ in
Fitting DATA your working environment.

Fitting onto: Method Surface grades: High Profile – 6mm aggregate (1/4” approx.)
Open grating Type ‘S’ fixings Fine Profile – 1mm aggregate (1/16” approx.)
(saddle assemblies)
Chequered plate Self tap screws or nut, Highly visible
bolt and washer
Colour coded in a wide range of colour schemes to suit individual locations.
Wood screws or adhesive Colour codes are: safety yellow, black/safety yellow, black,
green, grey, blue, red, white.
Fixing hole position fluorescent and photoluminescent finishes
If fixing holes are to be pre-drilled the following information
is required: Heavy duty
Scotgrip® Kicker Tread® is extremely durable and remain highly effective
for many years.
MANUFACTURED to customer specification
Scotgrip® Kicker Tread® is supplied to your requirements as the tread needs
to be fairly snug with the stairway stringers.
SAFETY ‘KICKER’
A safety ‘Kicker’ is incorporated at the rear of the Kicker Tread® to prevent objects
being dropped or kicked over the back of it and fall below. We recommend this
• Manufactured to customer specification upstand ‘Kicker’ to be at least 100mm (4” approx) in height. We can increase or
Scotgrip ® Kicker Tread ® is supplied to your decrease this height to suit your requirements.
requirements as the tread needs to be fairly
snug with the stairway stringers. Ease of installation
Scotgrip® Kicker Tread® is designed for quick and secure fitting, either by
mechanical fixings or bonding to existing surfaces. These products are
STANDARD SIZES
pre-drilled where required for quick installation. Scotgrip® products are non-load
bearing and must have a suitable underlying structure to be secured to.
B
readth (or Depth) of Step
Length*
UP TO 200mm (8” approx) SUPPLIED Quality – it’s what dRIves us
TO THE EXACT
UP TO 250mm (10” approx) All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
LENGTH OF
UP TO 300mm (12” approx) YOUR STEPS controlled conditions using highly compatible raw materials at our premises
in Banchory, UK.
*Please deduct 10mm ( 3/8” approx) from length of steps to
allow for proper seating. FURTHER SCOTGRIP ® PRODUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we
• Ease of installation of our available products and details.
Scotgrip® Kicker Tread® is designed for quick and secure
fitting on your location. Our products are pre-drilled to scotgrip ® ordering/enquiry information
aid installation.
Product Type:
Quantity:
Size:
Colour:
Surface grade:
Kicker Tread® Kicker Tread® (underside) If fixings are required, please advise which type of surface you are securing to:
For installation details, please go to the Technical section of

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Stairways - KTS Kicker Tread® Ref: SCGR KTS Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR SignAlert
Issue No: 1
Page No: 1 of 2


The Scotgrip® ‘SignAlert’ safety marking system is proven to be an effective method of warning
personnel of any hazards/hazardous areas which they may be exposed to and also as a reminder to
think of safety at all times. The ‘SignAlert’ system can be added to virtually all Scotgrip® anti-slip
safety products – the most popular being stair nosings/treads, Kicker Treads® and tiles.

We feel that it would defeat the purpose to have quality controlled conditions comprising of a reinforced
‘SignAlert’ on every step as there would be too many composite base and a graded aggregate surface. As a
messages, therefore we would recommend ‘SignAlert’ to Scotgrip® quality standard, these products are fire rated,
be placed at the first and last steps, possibly the middle spark and friction tested.
step depending on the stairway size. ‘SignAlert’ can
be of any description and can incorporate the clients Call us with your requirements. Eliminate ‘Slips
company logo to create a more positive impact with and Trips’ and enhance safety on your location.
regards to the safety messages given. • Eliminates ‘Slips and Trips’
All Scotgrip® products with the ‘SignAlert’ safety marking • Promote safety messages/information
system incorporate the unique Scotgrip high-traction
® • Cost effective
anti-slip safety surface which gives a sound foot-holding • High traction anti-slip safety products
in the most extreme conditions. These tough and durable • Tough and durable
products are manufactured under BS EN IS0 9001:2008 • Standard sizes and custom made
• Non corrosive
FQM
• Easy to fit over existing surfaces

No. 23136 No. 10041261

SignAlert Safety Marking System


Fitting DATA High-traction anti-slip
Scotgrip® ‘SignAlert’ safety products will provide a sound footholding even in
Fitting onto: Method
the most extreme conditions and will eliminate ‘Slips and Trips’ in your working
Open grating/grille Type ‘S’ fixings environment. Please note: the product and message size will determine the surface
(saddle assemblies) grade available.
Chequered plate Self tap screws or nut,
bolt and washer Surface grades: High Profile – 6mm aggregate (1/4” approx.)
Concrete HPS impact fixings
Fine Profile – 1mm aggregate (1/16” approx.)
Wood screws or adhesive
Highly visible
Fixing hole position
Colour codes are: blue/white, red/white, safety yellow,
If fixing holes are to be pre-drilled the following information Fluorescent and photoluminescent finishes
is required: Other colours available – please ask.
Heavy duty
Scotgrip® ‘SignAlert’ safety products are extremely durable and remain highly
effective for many years.
Scotgrip® ‘SignAlert’ safety products are manufactured in standard sizes (see table
opposite). We regularly manufacture custom sizes to suit individual locations.
SAFETY MESSAGES/INFORMATION
‘SignAlert’ can be of any description to promote safety messages/information and
Scotgrip® products. can incorporate the client’s company logo to create a more positive impact with
regards to the safety messages given.
STANDARD SIZES
Scotgrip® ‘SignAlert’ safety products are designed for quick and secure fitting, either
BREADTH (DEPTH) by mechanical fixings or bonding to existing surfaces. These products are pre-drilled
mm 200 260
inches 8 10
L en g th

700 28 ✔ ✔
900 36 ✔ ✔ controlled conditions using highly compatible raw materials at our premises
1200 48 ✔ ✔ in Banchory, UK.
Custom sizes also available. Standard lip size on stair If you would like to view the full Scotgrip® anti-slip safety product range that we
nosings is 30mm (1” approx). manufacture, please look at our website: www.scotgrip.com where you will find all
We would recommend the following as a guideline
for each stairway:
1 x tread for top step (Use Trailing Hand Technique)
1 x tread for bottom step (Use Handrail)
Product Type:
Quantity:
Scotgrip® Kicker Tread®
with ‘SignAlert’ message Size:
‘Use Handrail’ Colour:
Surface grade:
Message:
For installation details, please go to the Technical section of (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

SignAlert Safety Marking System Ref: SCGR SignAlert Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR SGCT
Issue No: 1
Page No: 1 of 2


Scotgrip® Grating Cover Tiles incorporate the unique Scotgrip® high-traction anti-slip safety

Open grating/grille flooring is quite acceptable when • Eliminates ‘Slips and Trips’
dry but can become extremely dangerous when wet, • Cost effective
soiled or painted. By installing Scotgrip Grating Cover
®
Tiles, not only is this slip hazard eliminated but the • Tough and durable
lifespan of the underlying open grating/grille is greatly • Standard sizes and custom made
increased. These heavy duty products are secured • Fully guaranteed
to open grating/grille with Scotgrip Type ‘S’ fixings • Fire rated, spark and friction tested
(saddle assemblies) comprising of an adjustable u- • Non corrosive
clamp, nyloc nut and washer. • Easy to fit over existing open grating/grille
Call us with your requirements. Eliminate
‘Slips and Trips’ on your walkways/decks.

FQM

No. 23136 No. 10041261

Walkways/Decks - SGCT Grating Cover Tile


Scotgrip Anti-Slip Grating Cover Tile
®
SGCT Scotgrip® Grating Cover Tiles will provide a sound foot-holding even in the most
FITTING DATA Surface grades: High Profile – 6mm aggregate (1/4” approx.)

Open grating/grille Type ‘S’ fixings
(saddle assemblies) Highly visible
SGCT Colour codes are: safety yellow, black/safety yellow, black,
green, grey, blue, red, white.
fluorescent and photoluminescent finishes

Heavy duty
Scotgrip® Grating Cover Tiles are extremely durable and remain highly effective
for many years.

standard sizes Scotgrip® Grating Cover Tiles are manufactured in a wide range of standard
BREADTH individual locations.
mm
mm 500 600 700 800 900 1000 1200
inches 20 24 28 32 36 40 48
Scotgrip® Grating Cover Tiles are designed for quick and secure fitting onto open
500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔ grating/grille using Scotgrip® Type ‘S’ fixings (saddle assemblies). These products
L en g th

1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔ are pre-drilled where required for quick installation. Scotgrip® products are
non-load bearing and must have a suitable underlying structure to be secured to.
1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔
2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔ Quality – it’s what dRIves us
2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔ All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
Custom sizes also available. in Banchory, UK.

For installation details, please go to the Technical section of FURTHER SCOTGRIP ® PRODUCTS
If you would like to view the full Scotgrip® anti-slip safety product range that we

Product Type:
Quantity:
Size:
Colour:
Surface grade:

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Walkways/Decks - SGCT Grating Cover Tile Ref: SCGR SGCT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Manufacturers of heavy duty, Ref: SCGR SDT
Issue No: 1
Page No: 1 of 2


Scotgrip® Deck Tiles incorporate the unique Scotgrip® high-traction anti-slip safety surface
which gives a sound foot-holding in the most extreme conditions. These tough and durable
products are manufactured under BS EN IS0 9001:2008 quality controlled conditions

Walkways/decks/flooring can be made from various Call us with your requirements. Eliminate
materials including the following: flat steel, aluminium, ‘Slips and Trips’ on your walkways/decks.
concrete or wood. Most of these materials are quite
acceptable when dry but can become extremely • Eliminates ‘Slips and Trips’
dangerous when wet, soiled or painted. • Cost effective

By installing Scotgrip® Deck Tiles not only is this slip • High traction anti-slip safety products
hazard eliminated but the lifespan of the underlying • Tough and durable
material is greatly increased. These heavy duty products • Standard sizes and custom made
are secured either by mechanical fixings or bonded to • Fully guaranteed
existing surfaces. • Fire rated, spark and friction tested
• Non corrosive
• Easy to fit over existing walkways/decks

FQM

No. 23136 No. 10041261

Walkways/Decks - SDT Deck Tile


Scotgrip Anti-Slip Deck Tile
®
SDT Scotgrip® Deck Tiles will provide a sound foot-holding even in the most

FITTING DATA Surface grades: High Profile – 6mm aggregate (1/4” approx.)

Metal Deck Self tap screws or nut,
Highly visible
bolt and washer,
or adhesive Colour coded in a wide range of colour schemes to suit individual locations.
Concrete HPS impact fixings Colour codes are: safety yellow, black/safety yellow, black,
Wood Screws or adhesive green, grey, blue, red, white.
fluorescent and photoluminescent finishes
SDT
Heavy duty
Scotgrip® Deck Tiles are extremely durable and remain highly effective for many years.

Scotgrip® Deck Tiles are manufactured in a wide range of standard sizes (see table
opposite). We regularly manufacture custom sizes to suit individual locations.
We recommend our own fastening systems and adhesives
for securing Scotgrip® products. Ease of installation
Scotgrip® Deck Tiles are designed for quick and secure fitting either by mechanical
fixings or bonding to existing surfaces. These products are pre-drilled where required
standard sizes for quick installation. Scotgrip® products are non-load bearing and must have a
suitable underlying structure to be secured to.
BREADTH
mm
mm 500 600 700 800 900 1000 1200 Quality – it’s what dRIves us
inches 20 24 28 32 36 40 48 All Scotgrip® products are manufactured under BS EN ISO 9001:2008 quality
500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔ controlled conditions using highly compatible raw materials at our premises
L en g th

1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔ in Banchory, UK.

1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔ FURTHER SCOTGRIP ® PRODUCTS
2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔ If you would like to view the full Scotgrip® anti-slip safety product range that we
2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔ manufacture, please look at our website: www.scotgrip.com where you will find all
Custom sizes also available.

For installation details, please go to the Technical section
of our website: www.scotgrip.com

Product Type:
Quantity:
Size:
Colour:
Surface grade:
If fixings or adhesive are required, please advise which type of surface you are
securing to: (e.g. flat steel, aluminium, concrete, wood):

Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

Walkways/Decks - SDT Deck Tile Ref: SCGR SDT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

Scotgrip Product Brochure

Recommended

Recommended

More Related Content

Similar to Scotgrip Product Brochure

Similar to Scotgrip Product Brochure (20)

Scotgrip Product Brochure