Easy to configure The Danalock is an intelligent lock that mounts on almost any door in minute Easy to install Danalock install the application on your phone in seconds. A wizard guides you through installation and calibration of your Danalock. Easy to use Lock and unlock the button, the TwistAssist function or using your smartphone. And with the auto-deverrrouillage, Danalock lock the door automatically opens when you approach your home and so close autoamtica. Long battery life. The Danalock has an average battery life of up to one year, and do not require external power. Note that the use of a box of home automation controller or Z-Wave can shorten the life of the battery. The battery status is easily visible in the App. When the battery reaches 30, 20, 15 and 10 percent, a notification via SMS and e-mail is sent. Limited or permanent access. No need to hide the key under the mat. Give your family a quick and easy access to their smartphones. In her maid or guests, limited in time or recurring access and receive notifications when they used and by whom the lock. Full control of the house. Develop control your smart home with a Danalock, the perfect primer for all orders at home. The Danalock works seamlessly with other devices in the smart home, and all communication has an advanced-encryption lock nobody can hack your house. Discreet, durable and Danes Danalock combines elegance and minimalism of Scandinavian design - with solid anodized aluminum bezel and Z-Wave Bluetooth and advanced technologies. A Danish design built to last. CHARACTERISTICS: Lock connected. 4 cylinders of different lengths are provided for gateways: 30/40 mm, 30/45 mm and 30/60 mm and inner door: 30/30 mm. Five hard keys are provided for opening the door from the outside. Connection via Bluetooth Smart and Z-Wave. Integration into the compatible drivers Z-Wave (eedomus, Vera, ...) Historical activities. Configuration options for closing and opening. Sharing Access: enable access to his housekeeper or a friend for a limited period. Automatic calibration. Easy to install. Battery operation. Compatible with iOS (iPhone 4S or later), but for Android (4.4). TECHNICAL CHARACTERISTICS : Power supply: 4 batteries 3V CR123. Material: solid anodized aluminum. Communication: Bluetooth and Z-Wave. Dimensions: 79 mm x (diameter x height) 49 mm.

1. EURO version quickmount page 1
In the danalock box
there’s 4 different
metal back plates.
A, B and C is for
US deadbolt doors.
U is for EURO and
SCANDI doors.
This is the one you
normally have to use
on European doors.
You can mount the
plate in two ways:
A: Place the back plate
on your door so the
tailpiece sticks out
from the center hole.
Break or cut the
cylinder-screws from
the danalock package
so they fit the distance,
and fasten the back
plate to the cylinder.
Use the two
holes beneath
the center hole.(c)
First you have to
remove your
current door
lock. Start on the
outside of the
door by removing
the rosette and
the screw. (a)
Remember to
unscrew the
lock-screw in the
mortisse-plate
at the side of
the door. (b)
In the danalock box
you’ll find 4 extra
lock cylinders.
Measure the back
part of the cylinder
(green on illustration)
with your old cylinder
from the middle of the
screwhole and away
from the tailpiece.
Use the one that
matches the cylinder
you removed from
your door.
The new cylinder
should be the same
length or a little shorter
than the old one.
1. Remove the current door lock
Remove the
rosette and
unscrew the
remaining screw
on the inside of
the door. Save
the screw for
later use.
Insert your key
and turn it so
the cam lines
up with the
body of the
cylinder.
Now you can pull
out the cylinder.
Insert the cylinder you
chose, and re-insert
the lock-screw in the
mortisse-plate to fix
the cylinder. (b)
5. Insert the new cylinder
6. Choose the right back plate
B: Insert one of the
screws that
originally held the
lock, and insert the
threaded tube from
the danalock
package to extend
the second screw.
Now you can finally
fasten the second
screw on the outside
of the door.
9. Mounting the back plate on the door version B - fasten the last screw
a
b
b
cam
c
4. Cylinder lenght
Control that the new
cylinder doesn’t stick out
from the door plate.
8. Mounting the back plate on the door version B
7. Mounting the back plate on the door version A
2. Take out the cylinder
3. Choose your new cylinder

2. EURO version quickmount page 2
To power up your
danalock circle you
first have to remove
the top lid from the
housing base.
Use a small flat-
head screwdriver
to separate the lid
from the housing
base.
Be gentle when
removing the lid.
12. Remove the lid
The danalock comes
with batteries inserted,
but a thin plastic folio
guarantees that your
new danalock is fully
charged.
Remove the folio and
the danalock lights up
with a green light for
5-10 seconds.
NOTE: This LED is
the ONLY light that
lights up, after the folio
has been removed.
13. Power up the lock
Click the lid
gently
back on.
16. Click the lid on
You need to calibrate the
danalock before you can use it.
After mounting turn the danalock
until the the lock is unlocked.
Leave the door open, so the lock
isn’t influenced while calibrating.
Go to Google Play or App Store
and download the danalock App.
When you have installed the App
and logged in a wizard will guide
you through the calibration and
adjustments of the danalock.
Note: If the batteries are
disconnected, you will have to
calibrate the danalock again.
17. Lock/unlock door with User button
Fit the danalock over
the back plate.
Make sure that the
tailpiece hits the slide
in the middle of the
adaptor.
14. Fit the tailpiece to the middle of the housing base
1,5 mm
Fasten the danalock
to the back plate by
tightening the two
umbraco screws
on each side of
the base with an
1,5 mm Allen key.
15. Fasten the danalock
Insert the tailpiece
adaptor, that suits
the tailpiece on your
door in the center
tube on the backside
of your danalock.
11. Attach the tailpiece adaptor
To avoid damaging
the danalock you
will have to shorten
the new cylinder
tailpiece.
It should only
extend max.
24 mm from
the door surface.
Use two pliers
or a wire cutter
to shorten the
tailpiece.
10. The tailpiece the right size
max 24 mm