1. Tank lining and coating instructions<br />The tank is a container that is used to store water or any other type of liquid substance. Tanks may include the reservoirs or ornamental ponds etc. the tanks are designed to prevent the leakage and the temperature and pressure control is also guaranteed in the tanks. The tanks are installed in different places depending upon the usage. The tank linings are used in industry, agriculture and oil reservoirs.<br />Tank installation and size depends upon the usage of the tank. The tanks are installed by the professionals and it is not a simple task. The tools used in the installation of the tanks are ladders, knives, hacksaw, drill, screwdriver, silicone natural sealant, etc. The tanks are used to maintain the temperature of the inner fluids constant. The pressure inside the tank is controlled manually. If you don’t check the inner pressure of your tank after some days, then you can have potentially disastrous results. The pressure must not be too low or too high inside the tank. It is important to install or implant the pressure releasing valve in your tank so that you can easily decrease or increase the pressure inside the tank.<br />The things you may need for releasing the high pressure water inside are bucket, water pressure gauge, wrench, replacement valve in case of need, hose and may be some rope. The temperature pressure relief valve show that is there the pressure and the temperature is normal or not. If there is a single drop of leakage, this is the sign of leakage due to the inner pressure. You must release that pressure otherwise it is dangerous.<br />There is also a risk of corrosion in the tanks which may cause leakage and eventually the loss of liquid or water. Prefer to buy the tank lined with zinc so that it will last longer and corrosion control is maximized. In case the rusting has started and your tank is not lined or protected then prevent it from oxygen and water. Most of the anti rusting primers cannot fight oxidation. But it will last longer till the next coating has to be done. You can also seal your tank and prevent it from rusting at home. You need to have gloves for working, canvas drop clothes, wire brush, steel wool, water hose, roller frame and many other things also. This task is not much difficult and anyone can try it although it is not equal to the industrial coating. Just put on pair of gloves and place canvas clothes beneath the rusty tank. The rust must be scratched off as much as you can so that there are no traces of rust behind. This will last longer the coating and there is lesser risk of rusting again. For scrapping, you can use 36-grit sandpaper. Then coat the tank with water based cleanser with the help of steel wool. Leave the tank for two hours and let it dry. Then coat the primer or POLYUREA coating and again let it dry. You must consult the professionals for marine coating and application if necessary. <br />Bead Blasting - Dry Blasting - Garnet Blasting - Graffitti Removal - Grit Blasting - High Pressure Blasting - Mobile Blasting - Roadline Remova -l Soda Blasting - Water Blasting. For more information please visit: http://coxcoating.com/<br />