One Testhead for Both Inline and Offline
No more investment waste
Field Upgradeable
Fully Agilent
Smallest ICT In the World
850mm in length
Largest bottom side clearance
ICT with full powered testing capabilities
2. One Testhead for Both Inline and Offline
• No more investment waste
• Field Upgradeable
• Fully Agilent
Introducing the new SFP i1000D… and our new
features
Smallest ICT In the World
• 850mm in length
• Largest bottom side clearance
• ICT with full powered testing
capabilities
3. 1. Small foot print
2. Better press down unit section
3. Fixture interface
4. Nice area to place the next DUT
5. Upgrade path to Inline
6. Offline fixture compatible for Inline
system
7. Fixture Adaptor to existing i1000D
fixture available
The offline SFP i1000D
5. New Fixture Interface – With Fixtures
96-pin DIN connector
Aluminum
frame
96-pin Male DIN
Flat Ribbon Cables
Fixture bottom plate96 female DIN
(22mm pin)
6. And this is how the fixture looks like now
The fixture structure has became stronger with 4 aluminum frames.
• Similar structure with most of the ICT systems
• Fixture houses will find it much easier to fabricate fixture kits
• Some selected fixture houses can produce the kits in large volume.
The wiring gets more standard (like other ICT) because it is just top-bottom
wiring connection.
The current fixture suppliers are:
• HonHan in China
• Interlatin in Mexico
• ECT in Europe
We are looking forward to working
with more partners, but partners will
not be interested without a real
fixture order.
8. i1000D SFP Press Down Unit Section
Fully covered fixturing space
• Clean, simple and bright
Curtain sensors that provides best safety
Newly designed button table
• Finally enough room for the next DUT
Sensors on side and back doors
• System stops when opened
And no more ESD issues!
9. SFP Inline Fixture SFP Offline Fixture
i1000D SFP Press Down Unit Section
Fixtures are compatible
10. Key specifications
Agilent i1000D SFP Offline
Dimension 850mm (L)* 900mm (W)* 1900 (H)
Max node count 1,664
Max PCB size 430mm (L)* 300mm (W)
Top side Clearance 150mm
Bottom side Clearance 40mm
Fixture Action Press-down, Dual Stage
Fixture Interface One-button-engage DIN Interface
Press Pressure 6kN ~ 8kN, (6kg/cm2 ~ 8kg/cm2)
DUT Power Supplies N6751*4 (400W) or N6774*4 (1200W)
Operating System Windows 7 32/64 bits
11. Use the Fixture Adaptor - Back
Fixture adaptor cable with numbers
Plug in the cables to the existing
fixtures
N6700 DUT power supply is also
converted.
12. Full Agilent product
Full Agilent support
Field upgradeable from offline
Conveyor widening mechanism
Introducing the i1000D SFP Inline
13. 1. 40mm bottom side clearance
2. Conveyor up/down mechanism
3. Board marker control *7
4. Fixture interface
5. Conveyor speed – 300mm/sec
(roughly 3 seconds)
6. PCB exchange in 6 seconds
Compared to a 2,400mm bridge type handler system, conveyor time is
reduced for at least 5 sec.
What are the features – why people will like it?
14. DUT
Conveyor widening mechanism
Test AccessTest Access
Conveyor
Fixture
Support plate
Probes Probes
Potential Keep out conflicts might happen
Our conveyor widens for preserving test coverage when access is on the edges
Support plate = 5mm
Shift = 5mm
15. High Bottom Side Component Clearance
The IPC SMEMA has a 25mm standard bottom clearance. The
SFP inline has 40mm.
The only inline ICT system that can handle long connector pins
in the industry.
Conveyor
Fixture
Support plate
40mm
>60mm
17. Board Stopper Design
Conveyor
Fixture
Support plate
Board
Stopper
When board stopper moves upright, it will hit the pin – topside clearance issue.
Board
Stopper
Topside clearance can only be achieved with a board stopper from the side.
Board
Stopper