1. Bouquet (poinsettia) : Assembly Instructions © Canon Inc. © Taka Taka
Before starting assembly :
Indicates where sections should
Writing the number of each section on its back side before be glued together.
cutting out the sections is highly recommended.
(* This way, you can be sure which section is which even after Curve parts as indicated by
these arrows.
cutting out the sections.)
For durability, we recommend use of Canon Matte Photo Paper and woodworking adhesive.
Indicates front/reverse of sections to To curve the paper
be glued. Glue the same numbers to Use a pencil, screwdriver
each other. These numbers indicate the or other rod-like object.
order for applying glue.
Basket assembly
Crease the parts and apply glue. To simplify assembly, apply glue to parts in order,
as indicated by the numbers.
View of completed model
* This model was designed for Papercraft and may differ from the original in some respects.
Assembly Instructions : Five A4 sheets (No. 1 to No. 5)
* Build the model by carefully reading the Assembly Instructions , in the parts sheet page order.
*Hint: Trace along the folds with a ruler Make these parts rounded
and an exhausted pen (no ink) to get a sharper, easier fold.
and apply glue.
Assembly Instructions
Glue
Mountain fold(dotted line)
The glue spot(colored dot)
Make a mountain fold.
shows where to apply the glue.
Valley fold(dashed and dotted line) Glue spot(Red dot)
Make a valley fold. Glue parts with the same number together.
Scissors line(solid line) Glue spot(Green dot)
Cut along the line. Glue within the same part.
Cut in line(solid line) Glue spot(Blue dot)
Cut along the line. Glue to the rear of the other part.
Scissors, set square, glue(We recommend stick glue), pencil, used
Tools and materials ballpoint pen, toothpicks, tweezers, (useful for handling small parts)
Before gluing, crease the paper along mountain fold and valley
Assembly tip fold lines and make sure rounded sections are nice and stiff.
Make two ribbons.
Glue, scissors and other tools may be dangerous to young children
Caution so be sure to keep them out of the reach of young children.

2. Bouquet (poinsettia) : Assembly Instructions © Canon Inc. © Taka Taka
Poinsettia assembly
The bouquet consists of six poinsettias, in three
Reference
sizes and three colors. All poinsettias are number
Total
assembled in the same way. The example shows
assembly of poinsettia A. Color
Assemble poinsettia A, then assemble the other Size
poinsettias. To simplify assembly, apply glue to
parts in order, as indicated by numbers. Number
Completed
Completed flower attachment ring
© Taka Taka
CAUTION
Do not hit other people with the pointed edges.
Doing so could result in injury.
Adults should make sure that children observe this caution.
Curve parts A2 to A13
(leaves) from the base to the tip
of each leaf, and fold creases
as indicated. Then apply glue.
Enlarged view of
Completed basket hexagonal flap

3. Bouquet (poinsettia) : Assembly Instructions © Canon Inc. © Taka Taka
Assemble parts A1 to A13 by layering with the hexagonal flap at the center of the flower.
Layer
Layer underneath
underneath
Layer
underneath
Layer
underneath
Layer
underneath
Completed poinsettia A

4. Bouquet (poinsettia) : Assembly Instructions © Canon Inc. © Taka Taka
Poinsettia B assembly Poinsettias C, D, E, & F assembly Mini-bouquet assembly
Assemble poinsettia B, following steps Poinsettias C, D, E and F do not have green leaves.
to from instruction for poinsettia A. Assemble the red leaves, following steps to
Do not glue part B14 at this time. from instruction for poinsettia A.
Then follow steps and to attach parts that
correspond to A1 and A14.
Glue mini-bouquet ribbons together
at a pleasing angle.
Bouquet decorative ribbon assembly
The three types of decorative ribbons
(parts 2-1, 2-2, and 2-3) are different
patterns and sizes, but the assembly process
for each is the same.
Poinsettia B
Glue reverse sides together.
Bouquet decorative leaf assembly
There are three types of decorative
leaves.
Curve parts 3-1 and 3-2 from Part 3-3 should be assembled
the base to the tip of each leaf. following steps and from Completed mini-bouquet
instruction for poinsettia A.

5. Bouquet (poinsettia) : Assembly Instructions © Canon Inc. © Taka Taka
bouquet assembly
Glue the yellow dots on the ribbons and
the backs of the leaves to the basket as if
you were creating a flower arrangement.
Glue the red dots on the
attachment rings to the basket.
Completed poinsettia bouquet
Enjoy the Paper Craft mixed arrangements pictured below.
Bouquet (roses) Bouquet (tulips)