1. ABDUL SATTAR
Al-Qamar PCO Phone:
Old sui Bazar, Sui Dera Bugti (+92) 300 4107687
Dera Bugti Disst, Baluchistan, Pakistan (+92) 3128226080
PASSPORT # BM 5421581 Email: sattarbugti@gmail.com
Objective · Looking for a challenging position in an organization, where I can utilize my oilfield
Drilling and Production (Completion and Well Intervention) experiences, education,
knowledge and skills for promotion and achievement of its goals.
Professional
Profile
· Drilling Completion & Well Intervention Engineer with diversified experience in
various disciplines of Petroleum Engineering (Drilling, completion design &
Supervising Well Completion and Well Intervention operations ) and Production
Operations (Well completion, well testing, , wireline, slickline, coiled tubing, thru-tubing
fishing and milling and different types of well interventions and workover
operations) at deep and HPHT wells.
Current
Status
Previous
Company's
Profile
Experience
· Working in Pakistan Petroleum Limited (PPL) as a member of Production
Engineering Team (Technical Services Department) from August 2010.
· Oil and Gas Development Limited (OGDCL) from Aug-2009 to Aug-2010.
 PPL is pioneer of natural gas industry and leading E & P Company in Pakistan.
 RESPONSIBILITIES & JOB DESCRIPTIONS AT PPL (August 2010 to PRESENT)
Well Completion – Independently Supervise conventional, single selective, dual
string completion for gas production and water & acid gas injection wells. Participate
in Planning and supervise Completions and W/O operations as per Sequence of
Operation approved by Head Office and have the ability to deviate programs
according to well bore nature and Operational Scenario. Participated in planning and
procurement of downhole completion and wellhead equipments and technically
evaluated the same.
Coordination with reservoir engg. Dept to design well completions and prepare
downhole, wellhead and X-mass tree material requirement’s detailed specification
sheet for bidders according to well bore pressure, temperature,H2S & CO2 contents
and completion design. Physically inspect all well completion related material and
verify technically all equipment’s are as per PO (Purchase Order).
Prepare completion policy note to provide guidelines and procedure for running
single or dual string well completion according to PPL’s SOP and HSE policies.
Supervise Work-over Operations (Rig/ Rigless), including Running/ Pulling Well
Completion, Wire line/ Slickline Jobs, Wellhead Installation & remedial work.
Stimulation and Nitrogen Kick off Jobs – Planning, handling service company Job
proposals and technically evaluate for post completion acid stimulation, selection of
appropriate chemical according to wellbore nature and recommend effective volumes for
acid stimulation, designed recipe (for conventional & retarded acids).
Supervise the jobs at site for Matrix Acid stimulation (Post – DST & Completion) &
performed post acid deliverability analysis and incorporate Coiled Tubing speed as per
actual Max pumping rate achieved during CT-BHA function testing and have good
experience in handling cycle’s circulations as per available volume of Brine or acid.
Supervise independently Coiled Tubing Operations for Acid stimulations to increase
well productivity to PPL field locations and thru tubing Milling operations for Well
Interventions and function testing of BOP, jetting nozzles, BOPs and pressure test of
treating lines, BOP kill lines.

2. Wireline – Design and supervise perforation, tubing puncture, tubing cutter (power cutter,
chemical cutter & RCT) and cased hole logging (USIT/CBL-VDL & PSP) jobs.
DST - Designed and supervised DST job (mechanical & hydraulic) including well
killing operation. Smooth and operational risk free operation in Wellhead Installation
remedial work. Supervised many temporary Conventional drill pipes Completion of
SLB 9 5/8” 47# PIPK-DJ with 10K control Head for DST in exploratory wells
Slickline – Drive unit for down hole completion equipments maintenance such as Wr-
SSCSV (Redress like changing Chevron Packings, Static and Dynamic Seals
replacement) , Tr-ScSSV (FTET, PLOT and straddling Insert-Type Wr-SSCSV) , HNS
replacements (Seating pressure control equipments into Nipple Profiles) and CIV or
dummy straddling into SPM pockets .RIH & POOH for latching out and seating of
several WR-SCSSV of Baker Model C/W locks BFVE, BFVE-10, BGVE, BFX-11, B &
BA-Nipple Sep. Sleeves, L-type SSD LME, LSE and many Flow Control Equips like
FWG, FMH & FSG plugs and redress same all and Same for Otis Model Wr-SCSSV
of FXE model, Sep. Sleeves and Dummy Chokes, PX-Plugs etc for Standard and
Heavy Tubings etc.
Plan and supervise pressurized annulus investigation to check existing Completion
string Integrity in single and dual gas producer wells via Wire line like Conventional or
Un-conventional (Quartz Gauges Logging Tools) to determine and locate completion
equipments posing negative integrity and causing Pressurized Annulus and
recommending remedial operation like straddle Pack-off or W/O.
Water shut-off job using CaCO3 chips placement thru-tubing bridge plug – As
per job proposal planned from Reservoir Engineering Dept. Supervise Water Shut-off
in wells by setting CaCO3 across bottom perforation intervals contributing with high
water production rate and carrying out acid stimulation job across upper gas
producing formations.
Thru Tubing Milling / Fishing Well Intervention – Plan and supervise many thru tubing
well intervention jobs for Milling fish into Well bore strings and removed restrictions for
running gauges. Milling jobs were carried out with Coiled Tubing and Slick line using
conventional tools for Sui-91 and Adhi-5.
RESPONSIBILITIES &JOB DESCRIPTIONS AT OGDCL (Aug 2009 to Aug 2010)
• Drilling & Well Completion - Involved and participated in all pre-drilling activities
like rig up as per SOP and participated in pressure test of Mud discharge line,
function testing of Mud pumps, pressure test of BOP & Exhaust fittings, shale shaker
and Solid control equipments before Spudding (commencement of Drilling
Operation).
• Practically supported in designing & running BHA of 24 ½ “, 17 ½ ', 12 ½ or 12 ¼ “' &
8 ½ or 8 ¼ “for 20" 13 3/8" 9 5/8” and 7” Liners respectively and actively involved in
monitoring Wellbore quality for deviation during Drilling/ tripping, curing losses
against severe loss zones, recommending on Slurry designs, improvising on
performance and tracking flat time/ casing running operations.
• Worked in mud system and have vast experience in preparing Water or Oil-based
Drilling fluid, maintaining by means of calculations for reducing mud weight by Oil or
Water, increasing mud weights by adding Barites and Caco3 etc Retort Analysis and
evaluation of hydro cyclone, Centrifuges and full knowledge in maintaining Oil/Water
ration by means of Retort Analysis Provide technical coordination of drilling,

3. completions activities to ensure maximum safety, minimal interruption of drilling, and
completion operations.
• Rig maintenance activity redressing various mechanical parts like mud pumps
,Swivels, Elevators, BOP, Annular BOP, Kelly Valves and Down Hole BHA parts like
Sleeve Stabilizers, Rotary Reamers, Scrapers, KSW, Kelly Valves, RDCV & RFCV
etc
• Have done several successful Technical Evaluations of drilling Surface & BHA
equipment like Swivels, BOPs Elevators, Kelly Valves, Stabilizers, DC, Drill Pipes &
WHDP, Shock Absorbers RDCV, RFCV, Vacuum Subs etc.
• Supervised over all operation Cased Hole Completion in single producing wells
using schlumberger DHCEs and High shot density SLB perforation guns for 5 wells
for OGDCL for the project of Uch Gas Phase-II.
• Safe Installation of Well Head and perforations as per Company’s Policies and
SOPs
 Computer Skills and Software
MS Office & Internet management.
SAP (for SR, RFQ FWO and SES).
HIS ( Creating new Index and editing of exiting tool specs)
 ADDITIONAL RESPONSIBILITIES
Raise Purchase orders and technically evaluate bids for downhole completion and
wellhead/ X’Mas tree equipment,
Technically Evaluate services like DST and Well Testing services , Coiled Tubing for acid
stimulation perforation wash, wireline, BHP surveillance etc
Arrange PRs and Pos to maintain Inventory level for production maintenances, service
requisitions and Framework orders to hire services from vendors
.
Academic
Record
· B.S. Petroleum Engineering (March 2009)
Baluchistan University of Engineering & Technology and Management Science, Quetta
Pakistan
Average percentage (1st, division).
Interpersonal
Competencies
· Good written and verbal communication skills
· Commitment to work
· Public Presentation skills
· Easily adjusts in new environment
· Good convincing skills
· Ability to work independently as well as team member
Languages · Fluent in English, Urdu, Balushi.
Interests
References
· Reading books, playing Football & cricket.
· Will be furnished on request.