1. This document provides safety instructions and operating instructions for a pinhole lens camera. 2. It warns that the camera contains dangerous voltage and should only be serviced by qualified personnel. 3. The instructions explain how to properly install, use, and dispose of the camera safely and in accordance with regulations.

1. CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Pinhole Lens Camera
User Manual
This lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intend to alert the user to the presence of important
operating and maintenance instruction in the literature
accompanying the product.
FCC WARNING : This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved
in the user manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made
This equipment has been tested and found to comply with the limits for
a class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment
Model : AA - 4522P - FS
Read this instructions.-All these safety and user instructions should
be read before the product is operated.
Do not attempt to disassemble the camera.
2.
Keep these instructions:- The safety, operating and user instructions
should be retained for future references.
To Prevent electric shock, do not remove screws or covers. There are
no user serviceable parts inside. Ask a qualified service personnel for
servicing.
3.
Heed all warnings :- All warnings on the product and in the operating
instructions should be adhered to.
4.
Follow all instructions:- All operating and user instructions should be
followed.
5.
Do not use this apparatus near water :- e.g near swimming pool
,Bathroom, wet walls.
6.
Do not use strong solvents or detergents.
Use a dry cloth to the camera when it is dirty. If it is hard to remove the
dirt on the camera, Use a mild detergent and wipe it gently.
Before operating, please check proper temperature, humidity and
power source ratings.
Do not block any ventilation openings, install in accordance with the
mfg instructions:- Kindly provide some air ventilation in any form. The
opening should never be blocked by placing the product on a bed, sofa,
fug or other similar surface.
8.
2.
Caution: Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
4. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.
WARNING: Do not install this equipment in a confined space such as a
bookcase or similar unit.
WARNING: Wiring methods shall be in accordance with the National
Electric Code, ANSI/NFPA 70.
This product is manufactured to comply with the EEC
DIRECTIVE 2004/108/EC and 2006/95/EC.
WARNING: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
WARNING: To reduce a risk of fire or electric shock, do not expose this
product to rain or moisture.
To disconnect power from the mains, pull out the mains cord
plug.
When install the product, ensure that the plug is easily
accessible.
Caution: This installation should be made by a qualified service person
and should confirm to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Contents
04
Cautions for Safe Operation
Cautions for Safe Operation .............................................
08
Box contains .....................................................................
09
Power Supply
This camera must always be operated a DC 12V only.
Construction ......................................................................
10
Handling of the unit
Dimension .........................................................................
11
Installation .........................................................................
12
Be careful not to spill water or other liquids on the unit. Be cautions not to get
combustible or metallic material inside the body. If used with foreign Matter
inside, the camera is liable to fail or to get a cause of fire or electric shock.
Troubleshooting .................................................................
14
Operating and storage location
Specification .......................................................................
15
Avoid viewing a very bright object during an extended period. Avoid
operating or storing the unit in the following locations.
Extremely hot or cold places( -10ºC ~+50°C We recommended to use unit in
between 0ºC ~+45°C)
User in a room or area filled with cigarettes smoke, dust or gas.
Damp or dust place
Avoid the camera with direct sunlight
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the pint where they exit from the
apparatus.
Places exposed to rain
Places subject to strong vibration
Do not aim the camera at bright objects. Never face it with direct
sunlight or other extremely bright objects.
Close to generators of powerful electromagnetic radiation such as radio or
TV transmitters.
Otherwise blooming or smear may be caused.
Handle the camera with care
10. Only use attachments/accessories specified by the manufacturer.
Do not abuse the camera .Avoid striking, shaking, etc. The camera
could be damaged by improper handling or storage.
11. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used use caution
when moving the cart/apparatus combination to
avoid injury from tip over.
Do not expose the camera to rain or moisture
This product is designed for indoor use or location where it is protected
from rain and moisture.
12. Unplug this apparatus during lighting storms or
when unused for long periods of time.
13. Refer all servicing to qualified service personal. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged.
05
All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
Holes in meta, through which insulated wires pass, shall have smooth
well rounded surfaces or shall be provided with brushing.
Do not expose the camera in such conditions as shown below.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
9.
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is covered
by the European Directive 2002/96/EC
A suitable conduit entries, knock-outs or glands shall be provided in the
cable entries of this product in the end user.
Use the camera under conditions where temperature is between -10°C
~+50°C.
Clean Only with dry cloth:- Unplug the power supply and then clean
with dry cloth.
7.
Disposal of your old appliance
03
1.
Caution: The apparatus should not be exposed to water and no objects
filled with liquids, such as vases, should be placed on the apparatus.
Operation of this equipment in a residential area is likely to cause
harmful interference in which cause the user will be required to correct
the interference at his own expenses.
02
Safety Precautions
Important Safety Instructions
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and use in accordance with the instruction
manual, may cause harmful interference to radio communications.
06
07
08

2. Box contains
Construction
Dimension
40
Side View
DC Power Plug
Installation
Video BNC Plug
35
Camera
2 Power / Video Cable
1. Draw out power / video
wires from required place.
2. Fix the screws on the
ceiling.
Screw
3. Connect the Power / Video
cable from back side of
camera
Lens
1 Camera
4. Loose the screws, adjust the
camera angle to required
direction and screws up
tightly.
35
Mounting Bracket
3
Mounting Bracket
5. After installation, view the
images by connecting the
camera with monitor.
Power / Video Cable
20
3
Screws
Back View
4
09
Installation
10
Troubleshooting
Check the following guide for the possible cause of a
problem before contacting service.
11
Specification
Model
AA - 4522P - FS
l
No power
Image Sensor
1/3” Super HAD CCD II
Check to be certain that you have sufficient current or amperage
from the power supply. Amount of current needed depends on
voltage. See this manuals spec. sheet for information on power
consumption.
Effective Pixels
l output is horizontal.
Picture
Depending on camera will be installed on wall or on ceiling, you
may have to remove camera module and rotate it so can install
for wall or ceiling. See Installation A step 2 for explanation and
steps.
PAL -500(H) * 582(V)
NTSC - 510(H) * 494(V)
Lens
Scanning Frequency
Pinhole Conical Lens 3.7mm, f 2.0
PAL –H: 15.625 Khz V : 50 Hz
NTSC – H:15.734Khz V:60Hz
Horizontal Resolution
450 TVL
S/N Ratio
>48 db
Shutter Speed
1/50(60) -1/20000s
Back Light Compensation
Auto
Auto Gain Control
Power
Auto
White Balance
ATW
Min. Illumination
Cable
0.5Lux
Video Output Level
Video
1V p-p,75O BNC connectors
Input voltage
12 V DC ± 10%
Power Consumption
<90mA
Operating Temperature
-10º to ~ + 50ºC
Operating Humidity
Up to 90%
Dimension
40mm(w)X45mm(H)X20mm(D)
Enclosure
14
Metal
Weight
13
12
78 g (with Cable)
15
www.avtrontech.com