3. A light? For sleeping? Isn’t that
contradictory?
You’ll find Light Sleeper to be the most
natural thing in the world. Light Sleeper is a
very clever device that projects a soothing light
on the ceiling. The light moves in a circular
motion above the bed. You follow the light with
your eyes for a few minutes, and you begin to
drift off.

4. We have been testing Light Sleeper in
real world situations for many months now. It
has proven itself to be effective, both in getting
people to sleep in the first place, as well as
helping them get back to sleep when they
wake up in the middle of the night. Light
Sleeper’s ease of use (just tap it to turn it on)
makes it ideal for use at any time, at home or
while travelling.

5. Why does this work? Following the light has
the effect of relaxing the mind, a necessary
prerequisite to entering a deep, refreshing
sleep, a product designer with insomnia.

10. 1. Correct placement of the
Light Sleeper
Light Sleeper should be placed at your bedside,
where it can project onto your ceiling without
obstruction. It should be positioned so you can
see the light on the ceiling easily, without
straining your neck or eyes. Your bedroom
should be as dark as possible (consider using
lined curtains) and, ideally, the temperature
should be between 13 and 24 C (55 and 75 F).

11. 2. Operating LightSleeper
The switch at the back of LightSleeper turns it
on. A button on the base allows you to adjust
the brightness of the light. The green indicator
lights tell you the brightness level; five is the
maximum brightness. Each time you push the
brightness button the brightness will increase
The optimal level of brightness
until you’ve reached level five; at that point,
pushing the button will people is when you can
for most decrease brightness.
just see the spot of light
projected on the ceiling. It
needn’t be any brighter than
that.

12. 3. Changing the Mode
Light Sleeper has a two modes: constant
and pulsing.
Press and hold the brightness button for
two seconds to toggle between both of
these modes. When Light Sleeper is in
4. Battery Charge
pulsing mode the green indicator lights
Charging Light Sleeper’s
will gently pulse.
rechargeable batteries takes 10-
12 hours; this will provide for up
to 10 complete 30 minute cycles
or 8-10 days in standby mode. Of
course, you may also use Light
Sleeper, while it is plugged into
the main’s power.

13. Light Sleeper is helping real
people sleep.
We’ve been researching Light Sleeper
for over two years now, and the results
have been eye-opening (so to speak):
78% of users report a significant
improvement in their ability to get to
sleep, stay asleep and improve the
quality of their sleep as well.

14. 1. Female 45-54, Teacher
Her problem: With Light Sleeper:
Took at least 60 Got to sleep much
minutes to get to faster.
sleep. If she awoke in the
Tried medication and middle of the night,
relaxation tapes but was able to get back to
with no success. sleep easily.
As a result, got an
extra hour’s sleep per

15. 2. Male, 25-35, IT Consultant
His problem: With Light
Got less than Sleeper:
3 hours sleep per Woke during
night. the night and used
Got to sleep within the product to get
30 minutes. However, back to sleep.
woke up in the Increased his sleep
middle of the night to 6-8 hours per
and couldn’t get back night.
to sleep again.

16. 3. Male 45-54, Bank Manager
His Problem: With Light
Slept only 3-6 Sleeper:
hours a night. Gets an
Woke during the extra two hours’
night and sleep per night.
struggled to get
back to sleep.

17. In his own words:
“I was amazed by how quickly my
sleeping pattern changed for the better.
Within four days use I had slept solidly for 7
hours, the first time in years and on the fifth
day I slept through to the 6:25 alarm – I can’t
remember the last time that this happened.”
“The design and operation are both
unobtrusive and fitted into the bedroom
environment well.”
Light Sleeperis proudly designed & built in
Britain