2. 12892 Rev 7 Tray Product Code - Tray Height AR-6430 - 2.16” AR-6410 & 11 - ~1.75” AR-6421&AR-6220 - ~1”

3. Drip Chamber Cap = 1.38” When the AR-6410 is assembled, coiled and stacked, the drip chamber cap is the tallest component.  Drip Chamber

4. 1561 DWG Rev 2 Coil Optimum Coil -There is more space in the tray than is actually being used. -The 4.5”tail/luer doesn’t fit. It could possibly fit if it was changed to 3”. -Space is used well. The tail fits. -We don’t have to change the 4.5” tail to a 3”.

5. 1561 DWG Rev 2 Coil Optimum Coil

6. 1561 DWG Rev 2 Coil Optimum Coil The drip chamber cap rests on top of the tubing. The drip chamber cap rests on the inner surface of the tray.

7. 1561 DWG Rev 2 Coil Optimum Coil

8. 1561 DWG Rev 2 Coil Optimum Coil

9. 1561 DWG Rev 2 Coil Optimum Coil

10. 1561 DWG Rev 2 Coil Optimum Coil -Based on overall product height, we would not be able to use a 1.75” tray. Going deeper than 1.75” is cost-prohibitive and we are better off using the existing pouches. -Based on overall product height, we can use a tray that is 1.75”. Note: The spike components are sticking up in this photo and appear taller than the drip chamber. Ignore that; I did not configure the rest of the product so that they would be flat.