Sri Balasubramanian, P.E., Chief of the Caltrans Office of Asphalt Pavement, and Jack Van Kirk, P.E., Director of Asphalt Technology for George Reed/Basic Resources, and co-chair of the Asphalt Task Group, part of the joinit Caltrans-industry Rock Products Committee, provide an update on Caltrans asphalt pavement specifications and testing issues. at the CalAPA Spring Asphalt Pavement Conference & Equipment Expo, April 12-13, 2017 in Ontario, Calif.
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
Caltrans Asphalt Specification Update
1. Caltrans
Asphalt Pavement
Specifications
Sri Balasubramanian, Chief, Office of Asphalt Pavements, Caltrans
Jack Van Kirk, Director of Asphalt Technology, George Reed Inc./Basic Resources
April 13, 2017
Ontario, CA
2017 CalAPA Spring Conference &
Equipment Expo
2. Transportation Funding
Road Repair and Accountability Act of 2017 (SB 1)
Provides $52.4 billion over next 10 years
50 percent to State and 50 percent to locals
Significant investment in transportation
infrastructure
2
3. Challenges from Influx of Additional
Funds
More amount of work resulting in less competition with
a potential for higher project costs
Potentially less time available to perform/inspect work
New contractors getting into business
Lack of trained personnel within agencies and within
industry
Retirements in agencies and industry
3
4. Specification Challenges
Two areas of focus that Caltrans & Industry are
partnering
Quality/Content of specifications
Implementation of specifications
4
5. Addressing the Challenges
Both challenges are addressed under the Rock
Products Committee (RPC) process
Task Groups / Subtask Groups
RPC Operating Principles
5
6. Specification is street ready
Specification is applied with consistency
Specification performance is as intended
6
RPC Operating Principles
7. 1. Section 39 Subtask Group
2. Section 39 QC/QA Subtask Group
3. Pavement Profile Smoothness Subtask Group
4. Intelligent Compaction Subtask Group
5. Performance Graded Asphalt Rubber (PGAR)
Subtask Group 7
Asphalt Subtask Groups - Projects
8. Asphalt Subtask Groups - Projects
6. RHMA w/ small amounts of RAP Subtask Group
7. RAP/RAS Subtask Group
8. PG+X% CRM Subtask Group
9. Post Plant Gradation Subtask Group
10.California Test 125 Update Subtask Group
8
9. 1. Vacuum Sealing of Cores Subtask Group
2. CRM Verification Subtask Group
3. HMA- Low Volume Subtask Group
4. Temporary Transverse Tapers Subtask Group
5. Asphalt Rubber Binder Quality Subtask Group
9
Asphalt Subtask Groups – Projects
Current Projects that will sunset in July
10. Caltrans – Industry Common Goals
Development and implement clear and
reasonable specifications
Provide appropriate risk for contractor and
agency
Provide biddable contracts
10
11. Caltrans – Industry Common Goals
Deliver projects safely for agency & industry
personnel and traveling public
Construct long lasting pavements
Provide good quality transportation system for
taxpayers
11