With CAD/CAM technology, doctors and patients benefit from easy, fast and accurate results in real time. From cavity detection to a bonded inlay, Dr.Herszenfis used the CS 3600 intraoral scanner to see his patient through their entire evolving treatment plan.

1. Workflow
Integration
Humanized
Technology
Diagnostic
Excellence
CAD/CAM Clinical Case: Inlay
using the CS 3600 intraoral scanner
and CS 3000 mill
Public. © Carestream Health, 2016

2. CAD/CAM Clinical Case: Inlay
• Patient presented with substantial decay on tooth #35.
• A ceramic composite inlay was purposed.
• The preparation for the inlay was completed; a temporary restoration was
completed.
• GC Cerasmart material (composite hybrid) was chosen for the inlay and
bonded with G Cem.
• Adaptation and results were very good.
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

3. CAD/CAM Clinical Case: Inlay
Initial panoramic image
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

4. CAD/CAM Clinical Case: Inlay
Tooth prepared, scanned and temporary placed
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

5. CAD/CAM Clinical Case: Plan in CS Restore
Preparation selection
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

6. CAD/CAM Clinical Case: Plan in CS Restore
Restoration adjusted
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

7. CAD/CAM Clinical Case: Plan in CS Restore
Occlusion checked
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

8. CAD/CAM Clinical Case: Mill with the CS 3000
GC Cerasmart material (composite hybrid)
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

9. CAD/CAM Clinical Case: Inlay Placed
Final resuts
Public. © Carestream Health, 2016 Courtesy of Dr. Herszenfis

10. Workflow
Integration
Humanized
Technology
Diagnostic
Excellence
For more information or to contact a
Carestream Dental representative,
call 800.944.6365 or visit
www.carestreamdental.com.
Public. © Carestream Health, 2016