1. Charlie Quinones
39 Botsford Street, Meriden, CT 06450
Email: charliejoon85@gmail.com
Tel: (203)-500-0725
Objective:
To obtain a position where I can gain the knowledge and experience which provides me the
opportunity to become a valuable asset to a company.
Skills Used:
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of
alternative solutions, conclusions or approaches to problems.
Judgment and Decision Making - Considering the relative costs and benefits of potential
actions to choose the most appropriate one.
Troubleshooting - Determining causes of operating errors and deciding what to do about
it.
Repairing - Repairing machines or systems using the needed tools.
Use of all general hand tools
Speaks fluent in English and Spanish
Develop a good working knowledge of product, placement, and inventory control
techniques and procedures.
Work Experience:
Thurston Foods- August 2014-Present
Order Selector
Hand select orders within various warehouse environments of fluctuating temperatures,
including Dry, Cooler, and Freezer
Operate assigned SOS unit to create labels; correctly place labels on product.
Stack product on pallets in accordance with proper selecting procedures (for example,
no stacking heavy-on-light, labels facing out, etc.).
Operate an electric pallet jack or forklift to transport product.
Stage pallets for loading on proper dock locations.
Follow sanitation requirements in order to comply with policy set forth by the Company
and by AIB (American Institute of Baking).
Maintain and safely operate all assigned equipment, including but not limited to pallet
jack, SOS unit, and personal protective equipment. Perform pre and post-trip
inspections, and safely operate all mechanical equipment.
Frequently lift product that weighs 1-75 pounds, up to 100 pounds; frequently reach up
to 72”; constantly bend and twist while operating a pallet jack and/or forklift, retrieving
items from lower shelf areas.
2. Shrink-wrap product on loading dock.
Attend all required company meetings.
Other duties may be assigned.
Express Employment Temp Agency –June 2014-August 2014
Temporary Employee (work varies)
Press operator
Roofing
Unloading trucks
Habasit America – January 2010- March 2014
Extruder Operator
Set up extruder and co-extruder, install screws, dies, heater bands.
Set up and operate saws, punching systems, primers, tapers.
Start equipment and set operating parameters
Run product in occur Select a production setting and identify when abnormal conditions
Determine setup procedures
Draw or press metal into shapes
Bozzuto’s Inc. - February 2009- January 2010
Forklift Operator/Order selector
Mount and dismount equipment approximately 9 inches high.Perform work in a
refrigerated work environment with temperatures that vary from -20 degrees Fahrenheit
to 55 degrees Fahrenheit.
Perform work in a non-refrigerated work environment with temperatures that vary from
40 degrees Fahrenheit to 90 degrees Fahrenheit.
Obtain and properly inspect equipment minimum of two (2) times per shift.
Ensure equipment operation check results are recorded properly and in a timely fashion.
Read labels/slot identification codes and product descriptions on cases, boxes, bags,
under normal warehouse lighting.
Stack products on pallets ensuring product stability while shipping.
Wrap product on pallet with plastic film to ensure pallet integrity.
Place pallets of selected product on shipping docks, at designated door locations.
Adhere to Company safety rules.
Operate a hydraulic or electric pallet jack to move palletized products.
Properly swipe in/out of the KRONOS time keeping system.
Accurately select product at a rate equal to at least the minimum production standard.
Lift and move empty pallets as needed.
Complete all required paperwork neatly and in a timely fashion.
Work extra hours in addition to normal schedule when needed.
3. Honeywell - Fire lite – Electronic Assembler
Sept 2003- February 2009
Assembled electronic and computer components following blueprints and schematics.
Checked stock bins for adequate supplies.
Maintained clean and safe working environment
Performed a variety of tasks ranging from repetitive to non-repetitive production
assembly.
Conducted quality inspections on processing line in accordance with quality
specifications.
Disassembled, modify, rework, reassemble and test experimental or prototype
assemblies and subassemblies according to specifications and under simulated
conditions.
Underpass Junkyard – Sept 2000- Sept 2003
Yard Maintainer
Dismantling cars and pulling parts.
Responsible for the opening and closing of yard gates.
Maintain yard and dismantling area in an orderly manner.
Inspect, clean and test equipment to maintain good working order
Label inventory
Education:
Platt High School, Meriden, CT 06451
Diploma in general studies - 1998 to 2002
Certification
Forklift Certified
Electric Pallet Jack Certified