1. Email: Chris.Beckman@WilkinsSolutions.com / Skype: c.beckman1
LinkedIn: http://www.linkedin.com/pub/chris-beckman/3b/799/907/
Twitter: @SeeBeckman
HTTP://www.WilkinsSolutions.com
HTTP://www.facebook.com/WilkinsSolutionsTennessee
Nashville, TN / (615) 669-3481
“Tennessee based Sales, Service and Accountability”
Chris Beckman
Bus & Transportation
Anti Microbial Process
2. Providing Affordable Environmentally
Safe Non-Toxic Antimicrobial Smart
Coatings and Long-Lasting Hand &
Clothing Sanitation Options
Leading Edge Preventative Solutions for:
3. The
Future of
Clean Is
Here
Fomite Control – or What Makes People Sick
as in ; Community Acquired Infections
like MRSA & Flu have negative impact on
Public and Private venues daily .
Mold and other indoor and outdoor biological
growth (Volatile Organic Chemicals) or VOC’s.
impact individuals & employee health & well-
being. Transmission of bacterial odors and air
pollutants in air and on surfaces are primary to
Air and Surface recontamination post normal
cleaning and disinfecting.
Maritime Operators and Owners: Indoor and
Outdoor maintenance labor and supply cost
are rapidly increasing. These cost are
constantly under financial scrutiny and re-
justification. We offer cost effective solutions
using safe product formulations
SolutionProblem Statement
4. In schools, the combination of low
humidity, super-emitter children and
toilet flush aerosolization are a toxic
combination.
Low humidity ensures that airborne
viruses will stay aloft and travel
throughout the school.
Super-emitter children continuously
add airborne viruses into the air
through breathing, coughing and
sneezing, and add even more with
every toilet flush.
Super- emitter
Children
Toilet
aerosolizationLow humidity
Schools are the key place for passing
bugs in our communities
5. A Study conducted at the
University of Arizona found
that the most germ-
infected objects were:
1. Cell phones
2. Desktops
3. Water fountain
handles
4. Computer keyboards
5. Computer mice
Americans
touch an
average of
300 infected
surfaces
every 30
minutes.
One cell of
staph can
multiply into
17 million in
just 48 hours.
An office Desk harbors
400 TIMES
more bacteria (Germs) than the
average Household toilet…
• 95% of facial infections are caused by hand to face
contact.
• Contact sports provide 8x more exposure to virus and
bacterial infections.
• 97 million cases of the flu are reported annually resulting
in 126 million “sick” days impacting school attendance and
the work place.
6. How big is a Nanometer..
One = 1,000 Nanometers
50,000 Nanometers would fit the
width of a human hair follicle…
10. • “Perceived Cleanliness”
• Spot Cleaning when visible fluid or dirt
appears
• Temporarily Disinfecting the surfaces
based on protocol
• Toxic Shields – frequently reapplied
Common practices for reducing the exposure to
pathogens on surfaces?
11. Surface Cleaning / Disinfection
•Should be used prior to the application of long-lasting
antimicrobial products. Use a hospital-grade cleaner
disinfectant that kills at least 99.9999% of germs and
bacteria on surfaces.
•Pre-cleaning enhances the effectiveness of antimicrobial
coatings by properly preparing surfaces for antimicrobial
treatment.
• OSHA blood borne pathogen standard for HIV, HBV and HCV.
• Tuberculocidal
• Virucidal
• Mildewstat / Fungicidal
• It is also recommended for regular maintenance cleaning.
12. Surface Cleaning / Disinfection
• Disinfectant cleaner, at a minimum, should be
effective against these commonly known illness-
causing microorganisms across three categories:
1. Antibiotic-Resistant Bactericidal Activity
2. Bactericidal Activity
3. Virucidal Activity
14. What is the residual kill time of
most disinfectants?
Surface Recontamination can
occur immediately after a
thorough cleaning.
Some Disinfectants even
require a “dwell time” to reach
the log reduction advertised.
But I Clean!!!
15. A Professionally applied antimicrobial
smart coating for continuous protection
against bacteria, viruses, mold and fungi
for a cleaner, healthier environment.
This coating is an energetic trap for
microbes and Volatile Organic
Compounds (VOCs) at a molecular level,
completing their destruction through
photocatalytic oxidation (PCO).
The best combinative surface solution available?
Surface Recontamination Shield
16. Affiliations & Resources
Surface Recontamination Shield
(SRS) Certifier
A Quiet BattleHealing Hands are Clean Hands S.I.C.K. Team
17. What is the residual kill time of
most disinfectants?
• Antimicrobial---Continuously kill all microbes contacting the surface
• Superhydrophilic---Clean the surface continuously
• 95% UV Protection---Protects any surface from sun damage
• Anti-Corrosive---Protect metals against corrosion
• VOC Elimination---Destroys Pollutants and Odors
• Lowest Comprehensive Cost - Economically Effective
SRS’s Multiple Attributes
18. Independent Lab Testing
The tests were designed to determine the efficacy of the antimicrobial
coatings in the most adverse conditions by giving the bacteria the optimal
growth environment.
ALL LAB TESTS USED ONLY TYPICAL ARTIFICIAL ROOM LIGHTING. The presence
of natural light or greater artificial lighting will increase the efficacy of the
coating in bacterial, virus and VOC reduction.
Tests by leading US laboratories show strong, persistent and protective
cleaning power in real world conditions: 98% reduction of deadly VRE
bacteria in 15 minutes; prolonged virus reduction of 89% over 24 hours and
strong reductions of MRSA and Staph; 91% reduction of C. difficile spores
over 24 hours and 99% reduction of hydrogen sulfide over 24 hours.
20. UV Protective
• The damaging rays
of Ultraviolet (UV)
light cause billions
of dollars of damage
to paints, plastics
and textiles exposed
to sunlight.
• The SRS works as
sunscreen on
surfaces
22. How we apply SRS
What is the residual kill time of
most disinfectants?
Original
Sphere
Electrostatics
OFF
Electrostatics
ON
Professional Electrostatic
Spray System
Ensures efficacy of
coverage
70 Times more coverage
than conventional
sprayers.
Treated surface dries in
less than 30 seconds
40 Times greater
than the force of gravity
23. SRS removes odors and
breaks down dangerous
VOCs and pollutants in the
air.
This safe, persistent
cleansing of the air occurs
using both natural sunlight
and, most importantly,
visible light indoors.?
The best combinative surface solution available?
Surface Recontamination Shield
24. Antimicrobial
SRS deactivates ALL dangerous microbes and
restrains proliferation by damaging their components
through radical oxidation.
This broad spectrum photo-mineralization of
pathogens is continuous and permanent.
Does not cause resistant strains of microbes because
its killing mechanism is strictly oxidative, not enzymic
or antibiotic.
Antimicrobial coatings are protectants not
disinfectants…they work in between cleanings.
25. WSE has put together a program
that will combat odor issues on bus
and provides a biological protection
system that will limit bacteria, viral,
mold, fungi and mildew on the bus.
OxiTitan TIO2zn Surface
Protectant includes multiple
benefits
Filters that will work on low flow
HVAC units and fans… with the
ability to filter submicron particles
BioProtect is an organic water
based molecule that can be put on
any surface and will continuously
inhibit bacteria, mold, mildew and
fungi for months
Vital Oxide is a disinfectant that
also works as a deodorizer.
Moldstat for
mold removal
What can I expect?
26. How do I know it’s Working?
PCO™
Verification Ink
• A quick and easy visible quality check!
• Safe, water soluble, reaction dye.
• The ink will change in a few minutes or less from blue to
pink.
• Color change is proof that the SRS is protecting the surface,
killing bacteria, virus and breaking down VOCs (the odor
reduction is self evident).
Similar to Currency
Verification Process
27. WSE SRS School Bus Safe Protocol
1. PRE-TEST (Lab Report from Swabs)
2. CLEAN SANATIZE DISINFECT
3. Surface & Air Recontamination
Protection
4. POST-TESTING (Schedule)
5. MONITOR EFFECTIVENESS
28. A) BioProtect 500™ - protects virtually all solid surfaces and
fabrics from a broad array of disease and odor causing micro-
organisms, including all forms of MRSA.
Bio Protect™ - Is a low-light solution that inhibits biological
growth on treated surfaces for as long as 90 days. On surfaces
with little or no friction the molecule will bind for years.
B) OxiTitan™ is a single component smart coating which
provides a cleaner and healthier environment with a safe,
transparent, easily applied and durable light powered
antimicrobial coating on new or existing surfaces for 1 year.
•OxiTitan™ Multiple Functions
Antimicrobial
VOC & Odor Reduction
Hydrophilic Self Cleaning
UV & Corrosion Protection
Click on above Logos to
see Electrostatic
spraying process and
more
SRS - School Bus Safe
30. School Bus Safe-Mold Stat
Specially Formulated MoldSTAT Plus Mold Cleaner
MoldSTAT plus is a specifically formulated cleaning mold and mold
remediation and restoration professionals unleashes a shockwave of cleaning
power
Use MoldSTAT plus for cleaning mold from wood with confidence
MoldSTAT Plus can be used on porous and non-porous surfaces including
finished and unfinished wood, drywall, concrete, brick, stucco, plastic, metals
and carpet. Effectively cleans and removes mold without using Chlorine
bleach
Moldstat Plus : highly effective for Fire or other water damage, sewer backup
and mold removal after flood
31. WSE SRS Cost Benefit Analysis
1. Replacing existing sanitation and
cleaning product use, frequency
and labor to complete saves time
and $ so SRS cost becomes neutral
in a very short time
2. Lowers Cleaning costs – significant
labor savings
3. Delivers a cleaning level that lowers
community acquired infections and
improves indoor air quality.
Healthier employees are more
productive and employees
reduction in sick days contribute to
bottom line improvement
4. Limits other health related
disruption to your guest and
international travel risk
•Measurable improvement in
• air quality
•Measurable improvement in
surface hygiene
•Measurable time savings in
cleaning & hygiene related tasks
•Measurable Healthier guest and
work force environment
32. Messaging for your Riders and
Community
Display the SAFE STAMP in your facilities to instantly communicate that additional
precautions have been taken to ensure a healthy environment.