This Presentation is useful to study Digital Electronics subject about D and T Flip-Flop. This Presentation is also useful to make Presentation on Flip-Flop.

1. Name: Panchal Dhrumil Indravadan
Subject: Digital electronics
Branch: Computer Engineering (B.E.)
Semester: THIRD Sem
Year: 2018-19
WELCOME

2. TOPIC
Design of T flip flop and D flip flop

3. CONTAIN
 D Flip Flop
 T Flip Flop

4. D-Flip Flop (Gated D Latch)
 D Flip Flop is a modification of Clocked
SR Flip Flop. It is also known as gated D
latch. The D Flip Flop receives
designation ‘D’ from the ability to
transfer ‘Data’ into a Flip Flop.
 It is basically a RS Flip Flop with an
inverter at R Input. So number of input is
only one in D Flip Flop.

5. Circuit Diagram

6. Q D Q (t+1)
0 0 0
0 1 1
1 0 0
1 1 1

7. D Flip Flop Gated D Latch using
NOR Gate

8. Cont…
 D flip flop is actually a slight
modification of the clocked SR flip-flop.
From the figure you can see that the D
input is connected to the S input and the
complement of the D input is connected
to the R input. The D input is passed on
to the flip flop when the value of CP is
‘1’. When CP is HIGH, the flip flop moves
to the SET state. If it is ’0', the flip flop
switches to the CLEAR state.

9. Timing Diagram

10. Timing Diagram for Positive Edge
Triggered D Flip Flop

11. Characteristic Equation of D Flip
Flop

12. T-Flip Flop: Toggle Flip Flop
 T flip-flops are similar to JK flip-flops. T
flip-flops are single input version of JK flip-
flops. This modified form of JK flip-flop is
obtained by connecting both inputs J and
K together. This flip flop has only one
input along with Clock pulse. These flip-
flops are called T flip-flops because of
their ability to complement its state (i.e.)
Toggle. So they are called as Toggle flip-
flop.
 When J=K=0, then T=0
If CP=1 the output is same as previous
state. It is Memory state of Flip Flop.

13. Cont…
 When J=K=1, then T=1
If Clock pulse is high (CP=1) then, the
output begins to toggle. So, for a
previous value of Q = 1, it switches to
Q=0 and for a previous value of Q = 0, it
switches to Q=1.
 Here also the restriction on the pulse
width can be eliminated with a master-
slave or edge triggered construction.
Take a look at the circuit and truth table
given for T Flip Flop.

14. Circuit Diagram

15. Block Diagram

16. Characteristic Equation for T Flip
Flop
Q T Q (T+1)
0 0 0
0 1 1
1 0 1
1 1 0
From the truth table, characteristic equation
can be derived as follows:

17. References
 Inspiration from Asst. Prof. Purvik Rana
 Notes of DE
 Text book of DE
 Images from Google images
 Some our own knowledge

18. Thank You