2. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
M: 21 09 14
The C38R works in any of the 100mm pipe combinations shown below except red.
DIRECT HIT®
cannot go down the
red arrows.
red arrows. in
100mm
lines C38R
cannot go down the
24º
Extreme
root
penetrator
PCT/AU2012/000326
front 24º and back 30°
C38r Starter Kit
3. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
M: 21 09 14
C38R in 100mm lines (cut with front turbo nozzle)
Cut
Clean
tree roots
drain
FAST
walls
Unblock
grease,
soap
etc.
Remove
sand
from
lines &
grates
Harden
deposits,
lime,
cement
etc.
Ice
in
drains
Adjust
assembly
to suit
100, 150 &
225 lines
Clean
manholes,
shafts, pits
& hydro
excavate
C38r Starter Kit
Penetrate
tree roots
FAST
YES YES YES YES YES YES YES NO YES
YES cut, clean & adjust with front turbo nozzle and flush from back jets
C38R in 100 mm lines (what can it go through, around, up or down)
80 mm
using
03 Hose
90 mm
using
03 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm
using
03 or 04 Hose
50 mm
Min Access
No 50 mm Bend
150 mm
using
03 or 04 Hose
NO NO NO
YES YES YES YES YES YES
4. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
M: 21 09 14
The C38R front turbo nozzle works in any of the 150mm pipe combinations shown below.
DIRECT HIT®
in
150mm
lines C38R
24º
Extreme
root
penetrator
PCT/AU2012/000326
front 24º and back 30°
C38r Starter Kit
5. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
M: 21 09 14
C38R 24º in 150mm lines (cut with front reverse turbo nozzle)
Clean
drain
walls
Unblock
grease,
soap
etc.
Remove
sand
from
lines &
grates
Harden
deposits,
lime,
cement
etc.
Ice
in
drains
Adjust
assembly
to suit
100, 150 &
225 lines
Clean
manholes,
shafts, pits
& hydro
excavate
Cut
tree roots
FAST
C38r Starter Kit
Penetrate
tree roots
FAST
YES YES YES YES YES YES YES NO YES
YES cut, clean & adjust with front turbo nozzle and flush from back jets
C38R in 150 mm lines (what can it go through, around, up or down)
80 mm
using
03 Hose
90 mm
using
03 Hose
100 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
150 mm using
03 or 04 Hose
100 mm
using
03 or 04 Hose
100 mm
using
03 or 04 Hose
50 mm
Min Access
No 50 mm Bend
150 mm
using
03 or 04 Hose
NO NO
YES YES YES YES YES YES YES
6. C38r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Add on no 3 is the safety pipe
To make the C38r assembly take your C38r carriage
PCT/AU2012/000326
Front view Back view Side view
24º
100 MM 150 MM 225 MM
7. From your Starter kit take the front nozzle
24º
PCT/AU2012/000326
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
8. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Screw them together with spanners provided in the starter kit
24º
PCT/AU2012/000326
Add on no 3 is the safety pipe
top view
C38r Starter Kit
9. 24º
PCT/AU2012/000326
Connect hose
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
10. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
Place assembly in the pipe
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
11. 24º
PCT/AU2012/000326
Turn the water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
17. C38r Starter Kit Add on no 3 is the safety pipe
24º
PCT/AU2012/000326
Turn the water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
18. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
Remove assembly from pipe
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
19. Add the ring if you need to cut roots around a corner, cut roots higher and go over a dislodged pipe
24º
PCT/AU2012/000326
front view
of 100mm
ring
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
20. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
21. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
22. 24º
PCT/AU2012/000326
Place assembly in pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
23. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
24. 24º
PCT/AU2012/000326
Turn water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
26. 24º
PCT/AU2012/000326
Go over a dislodged pipe
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
27. 24º
PCT/AU2012/000326
Turn water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
28. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
Remove assembly from pipe
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
29. 24º
PCT/AU2012/000326
Remove the ring
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
30. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
31. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
PCT/AU2012/000326
150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
32. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
top view
C38r Starter Kit
33. C38r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Add on no 3 is the safety pipe
Access through 50 mm PVC pipe
24º
100 MM 150 MM 225 MM
34. C38r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Add on no 3 is the safety pipe
Access through 50 mm PVC pipe
PCT/AU2012/000326
24º
100 MM 150 MM 225 MM
35. C38r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Add on no 3 is the safety pipe
Access through 50 mm PVC pipe
PCT/AU2012/000326
100 MM 150 MM 225 MM
39. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
Remove assembly from pipe
top view
C38r Starter Kit
40. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
Remove the hose
top view
C38r Starter Kit
41. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
PCT/AU2012/000326
Add on no 3 is the safety pipe
In larger lines to prevent the assembly turning around use the appropriate safety pipe
top view
C38r Starter Kit
42. 24º
PCT/AU2012/000326
Take of the front nozzle
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
43. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
PCT/AU2012/000326
24º
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
44. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Take the cap from your Cap kit if you need to go further in the line
PCT/AU2012/000326
24º
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
45. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
Screw them together with spanners provided in the starter kit
PCT/AU2012/000326
24º
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
top view
C38r Starter Kit
46. Add on no:1 and make a Cap Kit Add on no: 2 are the rings
PCT/AU2012/000326
24º
Place assembly in the pipe
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
47. PCT/AU2012/000326
Turn the water on
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit
48. PCT/AU2012/000326
1. Turn the water of
Add on no:1 and make a Cap Kit Add on no: 2 are the rings
24º
100 MM 150 MM 225 MM
Add on no 3 is the safety pipe
Side view
C38r Starter Kit