Pop mechanism wastes whilst modern looking can be a nightmare to keep clean, often develop leaks and can even seize up. This guide shows how you can easily convert any old pop mechanism waste to designer plug and waste system in minutes!
2. What you need for this project.
Clear silicone
Spanner
Cloth
3. Step 1. Prepare the old waste
Firstly you should be able to unscrew
the top of the old pop up waste in an
anti-clockwise direction.
Then using a spanner unscrew the
pop mechanism.
4. Step 2. Insert your waste repair kit
Apply silicone to the underside of the
insert flange and press into place.
Insert the grate and wipe away any
excess silicone from the surface.
5. Conversion done !
Job done !
Now make sure you tell your friends about it on
our facebook page!
www.facebook.com/EZYFIX
Need help still?
Call 1300 EZYFIX
DIY helpline
Allow 24 hours
to dry and your
new sparking
wastes are ready
to go!
6. Scan this QR Code with your
smart phone to see
installation videos and
housewife vs plumber video