2. Globe Valves
A globe valve is a linear motion valve used to stop, start, and
regulate fluid flow. The three primary body designs for globe valves
are Z-body, Y-body, and Angle.
Advantages
o Recommended for throttling applications.
o Good for frequent operation.
o Easy to repair.
Disadvantages
o Flow path causes a significant pressure drop.
o Globe valves are more costly than alternative
valves.
3.
4. Gate Valves
Flow is controlled by raising or lowering
the valving element. Gate valves are not
usually used to regulate flow because the
valving element can be damaged when in
the partially open position. Similarly, they
also limit the pressure drop across the
valve when fully open.
5. Advantages
• Gate valves opens or closes slowly, which prevents fluid hammer and
subsequent damage to the piping system.
• They need long operation time since setting the valve to the fully
open or closed position requires the handle to be turned many times.
• Good choice for on-off service.
• Full flow, low pressure drop.
• Bidirectional.
Disadvantages
• It is not suitable for throttling applications.
• It is prone to vibration in the partially open state.
• It is more subject to seat and disk wear.
• Repairs, such as lapping and grinding, are generally more difficult to
accomplish.
6. Ball Valves
A ball valve is a rotational motion valve that uses a
ball-shaped disk to stop or start fluid flow.
Advantages
- Maintains and regulates high volume, high
pressure, and high temp flow
- Low purchase and maintenance costs.
- No lubrication requirements.
- Give tight sealing with low torque.
- Time of valve operation is minimized.
- Can be used for throttling service.
- Can handle fluids with suspended solids.
Disadvantages
- Have relative poor throttling characteristics.
- Difficult to clean, leads to contamination
7.
8. Butterfly Valves
Butterfly valves are rotary motion valve that is
used to stop, regulate, and start fluid flow.
Advantages
– They are suitable for large valve applications.
– Compact, lightweight design.
– The maintenance costs are usually low.
– Pressure drop across a butterfly valve is
small.
– Used with chemical or corrosive media.
Disadvantages
– Difficult to clean
– Throttling limited to low differential pressure
– Potential for cavitations and choke
– Unguided disc movement is affected by flow
turbulence
9. Diaphragm Valves
A diaphragm valve is a linear motion valve that is
used to start, regulate, and stop fluid flow. The
name is derived from its flexible disk, which mates
with a seat located in the open area at the top of the
valve body to form a seal.
Advantages
- valve components can be isolated from the
process fluid.
- Valve construction prevents leakage of the fluid
without the use of a gland seal (packing)
Disadvantages
- The diaphragm becomes worn more easily and
regular maintenance is necessary.
- These types of valves are generally not suited for
very high temperature fluids and are mainly used
on liquid systems.
10. Pinch Valve
A pinch valve is the simplest valve design. It is a linear motion valve that is
used to start, regulate, and stop fluid flow. It uses a rubber tube (pinch
tube) to control the fluid.
11. Advantages
- They are ideally suited for the handling of slurries, liquids with large
amounts of suspended solids, and systems that convey solids
pneumatically.
- Can be used for application where corrosion or metal contamination
of the fluid might be a problem.
- The flow passage is straight without any crevice.
- There are no internal moving parts in contact with the fluid.
- Low maintenance due to wear or pressure.
- Minimum items to change. Tube ONLY.
Disadvantages
- Cannot be used in high temperature/ pressure applications
- Cannot be used with gas media
12. Check Valves
Check valves are designed to prevent the reversal of flow in a
piping system. These valves are activated by the flowing material in
the pipeline. The pressure of the fluid passing through the system
opens the valve, while any reversal of flow will close the valve.
Closure is accomplished by the weight of the check mechanism, by
back pressure, by a spring, or by a combination of these means. The
general types of check valves are swing, tilting-disk, piston, , and stop.
