Hafiz Obaidullah performance

4. What Is A Mood board?
A moldboard is a visual
tool that communicates our concepts and visual ideas. It
is a well thought out and planned arrangement of
images, materials, pieces of text, etc. that is intended to
evoke or project a particular style or concept.
Why Do We Use A Mood board?
To give us a process to build a clear design story that we
want to use in the space.
Using a mood board helps you to express the vision you
have in mind for the project.
Sometimes its very complicated to express your visual
ideas to others. A mood board is a very efficient visual
communication tool.
A mood board is a good starting point to get things done.
It will help you collate and focus your ideas, and help to
define the project.

7. Different tools used for garments design
Types of Design Tools and Equipments:
These fashion design tools are not only important for the fashion design related students or designers but also essential for all the creative peoples they can relate to this.
Before making a new design and developing it, you have to keep in mind. Fashion design tools and equipments are categorized by some section, these are following
below:
Draping tools
Fabric pressing tools
Fashion art tools
Sewing tools (Sewing machines, needles, threads)
Fabrics (Patterns, solids, specialty fabrics)
Pattern making tools
Cutting mats
Product development tools
Other related factors these are directly help to developed a new design:
Season, Target group, Occasion, Theme Colour
Fashion Dummies or mannequins
1. Draping tools:
Draping is the important techniques to positioning and pinning fabric around a dress form to make a structure of a garment design. To do this process some essential
tools are needed.
These are mentioned in below:
•Muslin
•Dressmaker pins
•Measurement tape
•French curve tool
•Hip curve tool
•Styling curve
•Plastic ruler 18”
•Fabric scissors (Card Scissors, Shear Scissors, Lightweight Scissors)
•Adhesive ¼” style tape
•Non-adhesive style tape
•Blue and red pencil
•Sketch and tracing paper roll
•Tracing wheel
•L square
•Yardstick
•Pencil sharpener
Dress forms:
Dress form is mainly used for fitting and draping clothes of the garment that is being designed

8. 40 Size Pattern (Drafting) Procedure
1.Draw a right angle triangle ABC,where:
2.A-B Front waist length +Jacket pattern ease(eg: 41.5+1=42.5 cm)
3.B-C Bust semi-circumference+ease (e.g:92+12=104/2=52cm)
4.C-D Back waist length +ease(e.g:40+1=41 cm)
5. D-C1 Back length(e.g:68 CM)
6. Join D-C1 and write centre back.
7.B-B1=C-C1
8.Join A-B1 and write centre front
9.B1-C1=B-C.
10. Join B1-C1 and write hem line.
11.B-E half of B-C.-B1-E1 half of B1-C1
12.A-F=B-E
13.Join F-E2 and write side seam line.
14.D-H half of C-D(e.g:41 /2=20.5CM)
15. H-I parallel B-C write bust line.
(this line is found approx. 3-5cm from the centre bust.
16.E2-E3 4CM If you would like the back to be more fitted.
17.Q-Q2=4 cm
18.Join Q2-E3 MOVED SIDE LINE.
19.C-X hip m height=20 cm
20.Trace X-Y HIP LINE
21.D-G Half of the shoulder length+ ease (e.g:36.5+3.5=40/2=20 cm)
22. H-L=1/3 D-H(e.g:21/3=7 cm)
23.Trace L-M Shoulder line and chest line.
24.H-H1 = D-G.(20 cm)
25.H1-I1 Under Arm section length+ ease(e.g:12.4 cm)
26. Draw G-H1 Parallel to D-H
27.Draw I1-J1 Parallel to G-H1.
28. Draw the centre bust.

9. Lower the front collar by 1-1.5 cm Point U3.
U3-U4 4cm as desired.
Join U4-B3 and join with the bottom line with a curve as
desired.
WAIST DART
The waist dart and side tapering are determined by the
difference between hip and waist , which is distributed
proportionally
along the line of the waist dart and on the side line,
in addition to the creation of a small 1.5cm Dart, with peaks on
the armscye and pocket line .

10. MEASUREMENTS:- Arm circumference 29 cm and arm length 58 cm.
On the left hand side of the piece of pattern paper, draw a rectangle with points A-B-E-F, where:
1.A-E is equals to BASE BODICE SECTION+1/2 SECTION(e.g:12.4+6.2=18.6 cm)
2. A-B Sleeve length measurement(e.g: 58 cm)
3.A-G Equal to measurement of L2-P1 minus 1 cm from the base of the back bodies. (e.g:12.5-
1=11.5)
4.Trace G-X parallel to A-E.
5. A-N half of A-B+2(e.g:58/2=29+2=31 cm). ELBOW LINE.
6.A-M=2/3 of A-E.CENTRE SHOULDER(e.g:18.4X2=36.8/3=12/3+1=13.3 cm).
7.M-M1=1/3 OF A-G(e.g:10.5/3=3.5 cm)
8.A-I =1/4 of A-E(e.g:18.6/4=4.6 cm)
9.G-H=2 cm
10.Trace H-B1 parallel to A-B.
11.X-L half of G-X(e.g:18.6/2=9.3 cm)
12. Trace the guide line E-L
13.L-L1 Half of HL.L1-L2=1 cm.
14. G-O = 1.5 cm.
15.G-G1 =G-H=2 cm.
16.Draw the front sleeve cap E-M1-I-O-G1 Shaping it carefully.
17. Draw the back sleeve cap E-L-L2-H-O, shaping it carefully.
18.B-B1 = 2 cm.B1-B2=1.5 cm. B2-B3=2 cm
19. B3-R Half length of bottom of sleeve. (e.g:13.5 cm).

11. UNDER SLEEVE.
20.E-E2 1.5 cm( different measurement as needed.)
21.B2-R1 equals to B2-B3.
22.connect R-E3 and R1-H with a curved line.
OPEN SLEEVE
23. Copy the under sleeve E3-P-R-R1-H-L2-L-E3 and position it
on the E-F fold line on the front part.
Draw the sleeve cap line, shaping it carefully.
check the measurement of the entire sleeve cap, which should
be greater then the measure of the armscye, by a variable
amount, based on the type of fabric used.