Chuyên kinh doanh bán buôn bán lẻ các loại hóa chất của các nhãn hiệu uy tín trong làng hóa chất quốc tế. Giá cả hợp lý,giao hàng tại kho hoặc theo thỏa thuận. Liên hệ Mr Đường/0946546655 Email / Skype: hoangminhduong77@gmail.com

1. Poly Aluminium Chloride（PAC）
PAC （Industry Grade）
Physico-Chemical Data
Properties Units Guarantee Value Typical Value
Alumina（Al2O3）Content % ≥29 30.15
Basicity % 40-90 83.9
Water Insoluble % ≤1.5 0.3
PH Value (1% Solution) 3.5-5.0 3.8
Appearance Yellow Powder
Quality Standard: GB/T22627-2008
Package：25KG/Bag
PAC （Drinking Grade one）
Physico-Chemical Data
Properties Units Guarantee Value Typical Value
Alumina（Al2O3）Content % ≥29 30.35
Basicity % 40-90 80.65
Water Insoluble % ≤0.6 0.2
PH Value (1% Solution) 3.5-5.0 4.0
As % ≤0.0002 0.0002
Pb % ≤0.001 0.001
Cd % ≤0.0001 0.0001
Hg % ≤0.00001 0.00001
Cr+6 % ≤0.0005 0.0004
Appearance Light Yellow Powder
Quality Standard: GB15892-2009
Package：25KG/Bag
PAC （Drinking Grade two）
Physico-Chemical Data
Properties Units Guarantee Value Typical Value
Alumina（Al2O3）Content % ≥29 30.15
Basicity % 40-90 81.9
Water Insoluble % ≤1.5 0.2
PH Value (1% Solution) 3.5-5.0 4.0
Appearance Yellow Powder
Quality Standard: GB15892-2009
Package：25KG/Bag
PAC（High-Pure Grade）
Physico-Chemical Data
Properties Units Guarantee Value Typical Value

2. Alumina（Al2O3）Content % ≥29 30.05
Basicity % 40-90 50.66
Water Insoluble % ≤0.6 0.1
PH Value (1% Solution) 3.5-5.0 4.0
As % ≤0.0002 0.000056
Pb % ≤0.001 0.00058
Cd % ≤0.0002 0.0000037
Hg % ≤0.00001 0.0000005
Cr+6 % ≤0.0005 0.00009
Appearance White Powder
Quality Standard: GB15892-2009
Package：25KG/Bag
Using method:
1. Solid product is put into the water to dissolve according to the 1:3 proportion, Then add 10-30
times amount of water to which concentration you need to use.
2. The best quantity needed may be according to the raw water's turbidity to be decided .Usually
when the turbidity of the raw water is 100-500mg/L,the quantity needed is 10-20kgs per kiloton.
3. According to the difference of water, please do some test before using so as to seek the most
suitable dosage. Generally speaking, for each ton of the water, respectively dosing 8g, 15g, 20g of
the volume, three minutes later to see what good effect, choose the better doing a few small test,
the final decision the exact dosage.

3. Polyferric Sulfate（PFS）
Polyferric Sulfate（PFS）
Physico-Chemical Data
Properties Units Guarantee Value Typical Value
Entire iron (mass fraction) % ≥19 20.65
Reducing material (count by Fe2+) % ≤0.1 0.05
Basicity % 8-16 12.6
Water insoluble % ≤0.5 0.26
PH value (1% water solution) 2-3 2.5
Appearance Yellow or bronzing solid
Quality Standard: GB14591-2006
Package：25KG/Bag
Uses
1. Water purification agent.
2. Industry waste water treatment (such as the paper making waste water, the printing waster water,
the massacre waste water, the automobile manufacturing waste water, the beer factory waste water
and so on.)
3. Many kinds of industry circulating water treatment (ex, the blast–furnace gas washing water,
the make-up water of the high pressure boiler in the heat and power plant, the industry waste water
in biochemical treating factory, the waste emulsifying solution, the opalescent solution and the oil
waste water.