SC4 ROYAL SOFT PUTTY - Mastic très souple / Extra weiche spachtelmasse
ICR SPRINT SC3 ANTHRACITE PUTTY - Stucco per metalli flessibile / Flexible metal putty
1. Stucco universale per la stuccatura di ogni tipo di
supporto. È consigliato per superfici ampie e
soggette a vibrazioni e sollecitazioni.
È di pasta molto tixotropica, morbido da applicare e
non dà adito a colature su superfici verticali.
È molto resistente alla maggioranza dei solventi e agli
alcali e acidi diluiti.
Resiste egregiamente oltre i 100° C senza subire
distorsioni o modificazioni.
Il VOC del prodotto pronto all’uso misurato secondo
ISO 11890 risulta inferiore ai 250 g/I, limite di
categoria dettato dalla Normativa Europea 2004/42.
Universal putty for filling any type of support. It is
recommended for large surfaces subject to vibrations
or stress.
It consists of a very thixotropic paste which is soft to
apply and does not tend to drip on vertical surfaces.
It is very resistant to most solvents, alkalis and
diluted acids.
It withstands temperatures of over 100° C particularly
well without resulting distortions or alterations.
The VOC of the product when ready to use,
according to the ISO 11890 measurement method,
is lower than 250 g/I, the limit for this product
category stipulated by EC Directive 2004/42.
SC3 ANTHRACITE
PUTTY.
FLEXIBLE METAL PUTTY.
SC3 ANTHRACITE
PUTTY.
STUCCO PER METALLI FLESSIBILE.
www.icrsprint.com
2. C) PREPARAZIONE DEL SUPPORTO:
• Lamiera zincata, alluminio e sue leghe, ferro,
lamiera d’acciaio, plastiche
• Vernici originali o vecchie verniciature ben consolidate
• Pulire bene la superficie da trattare con Antisil V09
e assicurarsi che sia asciutta e priva di silicone, cere
grassi e sostanze estranee in genere
• Su fondi o smalti carteggiare e pulire la superficie
prima di stuccare
D) AVVERTENZE:
> Miscelare accuratamente lo stucco con il 1-3%
di induritore in pasta. Evitare l’uso di una dose eccessiva
di induritore perchè potrebbero generarsi macchie
di perossido in fase di verniciatura.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE:
1-3% induritore in pasta potlife 4-5’ a 20° C
Applicazione a spatola
30’ a 20° C
4-5’ a 1 mt
P60-P120 sgrossatura
P180-P220 rifinitura
F) PULIZIA DEGLI ATTREZZI:
> Con diluente nitro o da lavaggio.
G) PROSECUZIONE DELLA LAVORAZIONE:
> Primer monocomponenti
> Fondi poliestere a spruzzo
> Fondi acrilici poliuretanici bicomponenti
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle
nostre esperienze. Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non
essendo le condizioni di utilizzo sotto il nostro controllo, non assumiamo nessuna
responsabilità sui risultati ottenuti.
A) DESCRIZIONE E CAMPO D’IMPIEGO:
Stucco universale per la stuccatura di ogni tipo di supporto. è consigliato
per superfici ampie e soggette a vibrazioni e sollecitazioni. è di pasta
molto tixotropica, morbido da applicare e non dà adito a colature su
superfici verticali. è molto resistente alla maggioranza dei solventi e agli
alcali e acidi diluiti. Resiste egregiamente oltre i 100° C senza subire
distorsioni o modificazioni. Il VOC del prodotto pronto all’uso misurato
secondo ISO 11890 risulta inferiore ai 250 g/I, limite di categoria detta-
to dalla Normativa Europea 2004/42.
B) NOTE TECNICHE:
Composizione: Resine poliestere insature e cariche minerali
Peso specifico: 1,83 ± 0,1 Kg/Lt
Colori disponibili: Antracite
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
IT SCHEDA TECNICA SC3
SC3 ANTHRACITE PUTTY
Stucco per metalli flessibile
SC3 ANTHRACITE PUTTY
Flexible metal putty
A) DESCRIPTION AND FIELDS OF APPLICATION:
Universal putty for filling any type of support. It is recommended for large
surfaces subject to vibrations or stress. It consists of a very thixotropic
paste which is soft to apply and does not tend to drip on vertical
surfaces. It is very resistant to most solvents, alkalis and diluted acids.
It withstands temperatures of over 100° C particularly well without
resulting distortions or alterations. The VOC of the product when ready
to use, according to the ISO 11890 measurement method, is lower than
250 g/I, the limit for this product category stipulated by EC Directive
2004/42.
EN TECHNICAL SHEET SC3
B) TECHNICAL DATA:
Composition: Unsaturated polyester resin and mineral charges
Specific weight: 1.83 ± 0.1 Kg/Lt
Available colours: Anthracite
Safety data: Refer to the safety sheet
C) SURFACE PREPARATION:
• Galvanized sheet iron, aluminium and its alloys,
iron, steel plate, plastics
• Original paints or aged topcoat finishes
• Clean well the surface to be treated with V09 Antisil.
Make sure it is dry and free from silicone, wax, grease
and any extraneous material
• On base coats or enamel top coats, sand and clean
the surface before applying the filler
D) CAUTIONS:
> Mix well the filler with 1-3 % paste hardener.
Do not exceed with the hardener to avoid risk
of staining during painting operations.
> Do not utilize the product at temperatures below 5°C.
> Store in a cool and dry place.
E) PROCESSING:
1-3% C10 paste hardener potlife 4-5’ at 20°C
Application with putty knife
30’ at 20° C
4-5’ at 1 mt
P60-P120 roughing-out
P180-P220 finishing
F) TOOLS CLEANING:
> With nitro or washing thinner.
G) RECOATING:
> 1K Primers
> Polyester Spray Primers
> 2K Acrylic-Polyurethane Primers
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.
I.C.R. S.p.A. ITALIA - Reggio Emilia Tel. + 39/0522.517803 – Fax + 39/0522.514384 E-mail: info@icrsprint.it – www.icrsprint.com |
ICR SPRINT COATING UK LTD UK - London - T: 01278802011 E-mail: enquiries@icrsprint.co.uk www.icrsprint.com |
ICR SPRINT INC USA - Fall River - MA - T: 800 980 4071 E-mail: icrsprintusa@gmail.com www.icrsprint.com |
ICR Ibérica, S.A. SPAIN - Tel. +34/901 101 408 E-mail: info@icriberica.com www.icriberica.com