This document contains a resume for Jay D. Arances, who is seeking a position corresponding to his interests and qualifications. He has over 10 years of experience in electromechanical engineering roles, including project engineering, electrical engineering, and technical support positions. His areas of expertise include PLC programming, HVAC design, AutoCAD, Revit, and working with systems such as aerobridges, ground power units, and HVAC. He is proficient in English and holds engineering and technology-related educational qualifications from universities in the Philippines.
1. Jay D. Arances
Cell #: +971 50 297 4891
Email: jay_mr21@yahoo.com
Summary: To acquire a position corresponding to my interest in life and
educational capabilities that facilitates my career and my future.
Knowledge:
Written and Verbal proficiency in English language
Quality, Health, and Safe Environment
Computer maintenance management system IBM Maximo (CMMS)
Strong PC skills, Microsoft Office applications
Primavera P6
PLC programming Siemens & Human machine interface (HMI)
Computer Aided Drafting (AutoCAD)
Revit MEP
Electro-Pneumatics & Hydraulic System
Analog & Digital Control system
Digital testing equipments
Proficiency in identifying defects & deficiencies
HV, MV and LV control panel
Preconditioned Air (PCA) / RTU’s
400 Hz Ground Power Unit
Close Circuit Television/CCTV
Main Distribution Board (MDB’s) and Sub-Main Distribution Board
Variable Frequency Drivers
Laser Sensor, Inductive Sensor, Magnetic Switch, & micro switch
REVIT MEP (BIM Modeling)
Knowledge of HVAC design.(HAP software)
2. WORK EXPERIENCE :
Position:
Project Engineer cum
Electromechanical Engineer
Company Name:
AECOM Middle East
International Tower
Abu Dhabi, UAE
January 2015 Midfield Abu Dhabi International Airport
Job description:
Factory acceptance test –FAT test in Spain (June 28, 2015 – July 2, 2015)
Represent AECOM as the Engineer for daily activities and CMA
responsibilities related to LET,BHS & PBB equipments throughout the
Project Cycle.
Reports to the Resident Engineer, Senior Resident Engineer, Area
Managers, MTB / MTC Management.
Conduct and attending weekly meetings including coordination, safety and
QA/QC.
Attending Technical Meeting with other members of the team including
the Architect.
Working with the CMA’s QA/QC Manager, control the activities of the
CMA’s relevant Inspectors to assure that the work is carried out in
complete accordance with the Drawings, Specifications, Schedule all in
complete accordance with the approved Quality Control Programs.
Review the work of the General Contractors to assure conformance with
the schedule including manpower & equipments requirements.
Review General Contractors work’s method statements & constructions
procedures, & provide comments & or recommendations to Resident
Engineer.
Site Acceptance Test – SAT test.
Supervise the progress of works on site and highlight issues to
management.
Ensure the methods of installation on site are in line with the best
Engineering practices by the contractor.
Coordinate between the various Trades onsite to ensure minimal
disruptions to progress.
Ensure methods of safety are adhered to by the contractor.
Ensure Quality assurance is delivered by the Contractor.
Produce Daily / Weekly / Monthly Reports
Witness the, NCR’s, MIR, and WIR
3. Position:
Sr. Electrical Engineer cum
Electromechanical Engineer
Company Name:
ThyssenKrupp Airport Services, S.A
Dubai International Airport, Terminal 3
PO Box 27278, Dubai, UAE
2010,2011,2012,2013,2014
Operation and Maintenance
Royal Air wings Dubai UAE
Dubai International Airport Terminal 1 &
Terminal 3 Concourse 2, Concourse 3
Job description:
Supervise & inspect sites activities to ensure the work of the technicians &
contractors executing installation, modification & maintenance for
Aerobridges, PC Air & 400Hz GPU are prior on safety practices and
specified quality standards.
Testing of panel boards, breakers, sensors, analog & digital controls.
Testing of motors, gears, gas spring cylinder, & hydraulic system.
Calibration of sensors, potentiometers, & micro switches.
Calibration of PLC, Can Open modules, & I/O modules.
Commissioning of Aerobridges, PC Air, and Ground Power unit.
Conduct and Perform Site Acceptance Testing (SAT).
Provide technical knowledge to the technicians.
Conduct toolbox talk and briefing for daily activities.
Conduct RCD, Thermography, and Insulation testing.
Carryout PM, CM and predictive maintenance.
Conduct daily & weekly inspection to insure the system in good condition
and safe to use or operate.
Communicate and coordinate to other department if there are other
involve in maintenance activities.
Perform activities report in soft & hard copy to higher management.
Perform CMMS report (IBM Maximo).
Provide assistance in Royal Air-wing during arrival of VIP’s.
Trouble shooting in operational & pressure situation and rectified in safe
and fastest way.
Inspection and approval of spares received at Warehouse.
Maintain portable test and calibration equipments.
Prepare and maintain instrument calibration certificates.
Maintain critical spare parts.
Document keeping and maintain equipment history.
Analyze the failures and implement corrective measures to avoid repeated
failures.
4. Position:
General Electrical Engineer cum
Electromechanical Engineer
Company Name:
ThyssenKrupp Airport System, S.A
Dubai International Airport, Terminal 3
PO Box 27278, Dubai, UAE
2009 –Site Installation, Testing and
Commissioning
Abu Dhabi International Airport
2007,2008 –Site Installation, Testing
and Commissioning
Dubai International Airport, Terminal 3
Concourse B
Job description:
Supervise & inspect sites activities to ensure the work of the technicians &
contractors executing installation, modification & maintenance for
Aerobridges, PC Air, RTU’s & 400Hz GPU are prior on safety practices and
specified quality standards.
Testing of panel boards, breakers, sensors, analog & digital controls.
Testing of motors, gears, gas spring cylinder, & hydraulic system.
Calibration of sensors, potentiometers, & micro switches.
Calibration of PLC, Can Open modules, & I/O modules.
Commissioning of Aerobridges, PC Air, and Ground Power unit.
Conduct and Perform Site Acceptance Testing (SAT).
Provide technical knowledge to the technicians.
Communicate and coordinate to other contractors if there are other
involve in installation activities.
Perform activities report in soft & hard copy to higher management.
Position:
Technical Support Engineer
Company Name:
Broadcom Networks Inc.
G/F Cebu Holdings Center,
Cebu Business Park, Cebu City
Philippines
2006 – Site Installation, Testing and
Commissioning
International School, Cebu City Philippines
Job description:
Installation of Close circuit television/ CCTV camera’s.
Installation of Fire alarm system.
Installation of Public Address system.
Installation of network structured cable.
Testing and Commissioning.
5. Position:
Electromechanical Technician
Company Name:
MONDE Nissin Corporation
Sacris Road, Mandaue City Cebu
Philippines
2003 - Machine Operator MONDE Nissin Corp. Wafer Section
Job description:
Operator of Packaging Machine.
Conduct weekly maintenance of Conveyor system & packaging machine.
ON JOB TRAINING
VSAT HUB PLDT Philippines
A.S. Fortuna St. Mandaue Cebu City, Philippines
Job description:
Maintenance and Repairing of Channel Units
Conduct monitoring Visayas and Mindanao area in the Philippines.
Repairing of High Voltage Rectifier.
Repairing of power supply.
TRAININGS and SEMINARS ATTENDED
Primaver P6
Effective Planning & Scheduling
Cambrige Education – Project Management Institute
Fundamental of Face Detection and Tracking
White Gold House, Cebu City Philippines, December 10, 2006
Electro Static Discharge Control
White Gold House, Cebu City Philippines, December 10, 2006
AM/FM Seminar
College of Technological Science-Cebu Philippines, August 21, 2004
ISO 9001 Seminar, Quality Management
DECS Applied Nutrition Center Banilad, Cebu City Philippines, September 18,
2004
ISO 14001 Seminars, Environmental Management
DECS Applied Nutrition Center Banilad, Cebu City, September 18, 2004
6. EDUCATIONAL BACKGROUND
Bachelor of Science in Electronics and Communication Engineering
Cebu Institute of Technology University
N. Bacalso Ave., Cebu City 6000, Philippines
5 years course, Graduated 2006
License of Electronics Engineer, PRC License no. 0038744
Industrial Automation and Control Engineering Technology
Mindanao State University Iligan Institute of Technology (MSU-IIT)
Andres Bonifacio Drive, Tibanga Iligan City 9200 Philippines
3 years course, Graduated 2003
Academic Schoolar
Certified Cisco Network Associate ( CCNA )
Center for International Education ( CIE )
168 Pres. Magsaysay St., Kasambagan 6000
Cebu City, Philippines
CCNA 1- Completed
REVIT MEP
CADD Centre International
Bur Dubai, Dubai, U.A.E.
HVAC Design
CADD Centre International
Bur Dubai, Dubai, U.A.E.
Personal Detail
Nationality : Filipino
Age : 32 years old
Language : English, Tagalog
Passport Number : EB3624393
Passport Expired : September 11, 2016
Marital Status : Single
Visa Status : Residence Visa