I am working as a Electrical Commissioning Engineer / CompEx Inspector/QAQC Engineer for the 14 years Experience and happy to mention some of my achievements in this role

1. CURRICULUM VITAE
Post Applied for: E&I Engineer/CompEx Inspector/QAQC Supervisor
KANDHASAMI SENTHAMIZH SELVAN
Contact Phone No: +65 92719556
Email: sselvan5@gmail.com
Singapore.
Well conversant Electrical and Instrumentation professional eager to work in a challenging
environment with opportunity to use my current Experience and to enrich my knowledge and enhance my
experience. Projects Which include E&I Inspection and Commissioning, Review Design drawings and
Installation& Operation & Maintenance of onshore jobs. Contribute towards the achievement of
Organizational objective by applying my professional skills.
 Electrical and Electronics Communication Engineering (Diploma)
 Bachelor Electrical Engineering (B.Tech)
 COMPEX EX01, EX02, EX03, EX04 (JTL CERTIFICATENO.67041) SINGAPORE.
 BOSIET (OPITO APPROVED) MSTS ASIA SINGAPORE.
 DIVING & OFFSHORE MEDICAL (UKOOA/OGUK) SINGAPORE
 Oil and petrochemical safety Supervisor SINGAPORE
 Certificate of Electrical Training in ABB.
 400v,690v.Competent Electrical authorization certificate
 Certificate Danfoss Drives Vagon
Personal profile
Experience Summary
Academic Qualifications

2.  14 years of experience in having involved in Construction, commissioning and maintenance of
Electrical and Instrumentation equipment in oil & gas, utility industry.
 To create the task list for the PM Job and assign the resource for the spare parts, sequence step and cycle of
task like monthly, quarterly and yearly.
 Understanding and troubleshooting of loop wiring diagrams. Hook-up drawings Instrument specification
sheets, Relay logic, sequence diagrams, cause and effect diagrams, local and control room panel layout
drawing and cable layout drawing & cable index.
 As per IEC/ATEX- Hazardous Area Zone 0, Zone1, Zone2 and Safe Area Atmospheric Explosion Proof
Equipment’s Inspection.
 Hazardous Area Equipment’s register preparation as Per Hazardous Area Classification Drawing.
 Witness FAT (Factory Acceptance Test) in vendors factory for E&I Equipment’s
 Operation of medium and high voltage switches gear up to 22KV.Isolate /De isolate Electrical
Equipment, 22KV, 690 & 400 Volt.
 Preventive maintenance and repairing of HV Motors, LV Motors, MV Motors.
 Installation, commissioning & Maintenance of Compressors, VFD, Diesel engines Generators, gas
turbines Generator and HVAC, Heat tracing.
 Installation & Maintenance High Voltage and Low voltage Switch Gear, Cranes Electrical system.
 Installation, commissioning & Maintenance Diesel engine Fire water Pump, Uninterrupted Power
Supply (UPS) and Battery charger units.
 Execution of new electrical installation work Erection and maintenance of street lights. Implement
preventive program and conduct day to day maintenance.
 Preparing for shutdowns and also handling all shutdown related tasks assigned to me like load transfers,
transformer overall maintenance, Bus bar maintenance and testing, breaker maintenance and testing
etc.

3. Project : - PTR, NdBR OIL&GAS
Client : - ARLANXEO Singapore Pte. Ltd
Location : - Singapore
Position : - E&I Engineer / CompEx Inspector /QAQC Supervisor
Period : - From SEP2014-TILL DATE.
Vessel Name : - RUBY FPSO, Chevron OIL&GAS.
Client : - M+W Group
Location : - Singapore, M. M. H .E Malaysia Shipyard
Position : - E&I Supervisor/QAQC
Period : - From FEB2013-MAR2014.
Project : - 2×600 MW POWER PLAT TNEB
Client : - BHEL
Location : - Chennai and Mettur
Position : - Asst Electrical Engineer /QAQC Supervisor
Period : - From July2011-Jan2013.
Vessel Name : - SPT EXXON MOBIL/ AOKA MIZU(FPSO)-2008
Client : - FWP/Blue Water
Location : - Sembawang Shipyard , Jurong Island Singapore
Position : - E&I Technician /QAQC
Period : - From NOV2008-MAY2011.
Project : - CPCL
Client : - VOLTECH PVT LTD
Location : - Mumbai, Delhi,
Position : - E&I Technician
Period : - From OCT2005-MAR2008.
Job Responsibilities
Career Summary

4.  Hazardous Area Equipment’s register preparation as Per Hazardous Area classification Drawing.
 Ex d, Ex e, Ex n, Exp, Ex i, Ex m, Equipment’s Detailed/Visual/Close Inspection and on-site Supervise
Remediation Activities.
 To Prepare Permits and Risk Assessment on Site to Ensure the safety works.
 Hazardous Area Equipment’s Register preparation as Per Hazardous Area classification Drawing.
 To ensure that certified equipment has been installed as per the detailed design, In Accordance with EX
Certification Including Special Condition of Use.
 Code IEC and ATEX or relevant standards during installation.
 As per Inspection Test plans (ITP) for projects Specification and prepare ITR and punch list Clearance,
while ensuring zero NCR for EIT installation As per ATEX standard.
 Implement the project as per specifications such as National electrical
o Code,IEC, ATEX or relevant standards during inspections.
 Inspection of Hazardous Area equipment as Per Equipment Category/EPL/Protection Type /Certification/
T class.
 Field calibration , service ,testing and repair for pressure ,temperature, electrical and flow instruments
 Conducting Loop Checking and Functional Test for All kind of Instruments.
 Review and Preparing the technical documentation such as
o Specification, single line drawings and schematics, layout drawings, cable
o Schedule, installation and testing procedures.
 Various types of CT & VT Testing and Hi-pot test of cables up to 75MVA (Insulation Resistance)
Battery charging / discharging and operate load Bank.

5.  Inspection of Hazardous Area equipment as Per Equipment Category/EPL/Protection Type /Certification/T
class/ IP Rating
 Testing and setup of breakers and feeder relays by Omicron relay testing machine.
.
 Working here Pr-Commissioning, Commissioning & Start-up work.
 Testing All types of Breakers, AC UPS, DC UPS & VFD Motor Panel. Normal and Emergency Lighting
Transformer and distribution panel
 Inspection of Such as PMS/ESD/PCS/RIO Panel.
 Polarity and saturation test of Current transformer Ratio test of Potential transformer Testing of
Ammeter/Voltmeter and thermal overload, motor production relay.
 Primary and secondary injection of transformer and Bus bar. Panel wiring and modification referring the
schematic diagrams.
 I have knowledge of Auto Manual change over system of MV & LV Switch gear. (Auto changeover &
momently paralleling changeover system.)
 I have knowledge of transformer oil testing & other test stability test, REF testing, ratio test, IR test,
magnetic balance test, winding resistance test and ten delta tests
 Commissioning and testing of HV & LV Motors, all starter DOL, RDOL & Star – Delta, PCC , MCC
and CT,PT, HV panel 5.5kv and Circuit breaker, UPS, Battery, Battery charger and Battery load test
and VFD.
 Testing and commissioning of power transformers (up to75 MVA).
 System to DCS, Switch-gear, MCC motors and electrical equipment’s alarm and indications.
 Testing and commissioning of MV/LV 3 Phase Induction and Synchronous motors including WR & IR
testing, DC Hi-Pot test, phase rotation test, no Load & load run test also vibration test.
 Testing and commissioning of heat tracing panel & circuit, EHT Controller, RTD, thermostat and loop
impedance checking.
 Calibration and Troubleshooting of Pressure, temperature, flow, level, Transmitters.
 Single loop and multi loop controller, indicators, recorders and gauges.

6.  All type two wired electronic, SMART, HART and pneumatic transmitters.
 Servicing and maintenance of control valve, on/off valve, solenoid valve, manifold valve.
 All Types Safety relief valves calibration and commission using (MAX METER)
 Involved in compressors installation, commission and calibration of smart, foundation field bus field
transmitters.
 Supervision of construction activities such as cable tray installations, cable pulling, Glanding and
termination, Instrument installations.
 Lead a team of technicians and contractors to troubleshooting for electrical and Instrumentation.
 Perform calibration, repair, troubleshooting and functional test of field instrument, control valves
 Electrical equipment’s. Perform Cable Test & Motor Test for LV 3Phase/1Phase Induction motors
 Perform troubleshooting with ability to rectify electrical and instrument faults.
 Involved in Pr Commissioning &Commissioning Operation and Maintenance of LV & HV Substation in
CPCL Project,
 UPS up to 40kva and battery chargers, battery charging discharging and load testing etc.
 Measuring instruments and control loop checking, fault finding trip test to field to power control and
motor control center.
Name : Kandhasami SenthamizhSelvan
PERSONAL DETAILS

7. Date of Birth : 04 Jun 1984
Nationality : Indian
Marital status : Married
Language known : English, Tamil, Hindi
Passport No. : M0448956
Place of issue : Chennai
Date of issue : 28/07/2014
Expiry date : 27/07/2024.
Notice Period : 15 days
DECLARATION
I, KANDHASAMI SENTHAMIZH SELVAN hereby declare that the above furnished details are true to the
best of my knowledge and belief.
Date: 12/01/2020 {SENTHAMIZHSELVAN K}
Place: SINGAPORE