2. About Vincent Lapointe
- Master degree in multi-domain simulation
- Working for OPAL-RT since 1998
- Leading the R&D department
- Second visit in India
3. OPAL-RT
OPAL-RT TECHNOLOGIES in Brief
Founded in 1997
• HQ in Montreal
• +100 Employees
CEO and Funder Jean Belanger
• 25 years of experience at
Hydro Quebec
+500 customers
worldwide
Main uses
• HIL
• RCP
• PHIL
• Faster simulation
Our main market
4. OPAL-RT Offers a Complete Range of
Solutions for…
Real-Time Simulation of Power Electronics &
Power Systems
5. Helps Engineer in Development Process
Rapid Control Prototyping Hardware in-the-loop Testing
Desktop Simulation
Coding
Validation
6. OPAL-RT Offers a Complete Range of
Solutions for…
PlantController
Rapid Control Prototyping Hardware-in-the-loop (HIL)
Simulation
Simulink simulation of
• Motor drive control
• Power electronic control
• FACTS
• Protection, PMU
• MMC, HVDC, FACTS
• PV, Wind Farm, DER
• Plugin and hybrid vehicle
• Power electronic converters
• SCADA, WAM
Software-in-the-loop
7. ePHASORsim
HYPERSIM
eMEGAsim
Power System, Power Electronic,
Control, Physical Modelling
Simulation
Large EMT Power System
Simulation , FACTS, HVDC
Wide Area & Transient Stability
Simulation,
Fast Power Electronic Simulation
on FPGA
OPAL-RT Real-Time Power System
Simulation Suite
eFPGAsim
8. From wide area studies to detailed power electronic simulations
Simulate a Wide Range of Applications
9. Typical application time step
Application Typical
Frequency
Typical Time
Step
Simulation
Technology
Transient Stability Simulation (PHASOR) 100 Hz 10 ms
Intel CPU
3.3 Ghz
Robotics / Aircraft simulation 1 000 Hz 1 ms
Electromagnetic Transients Simulation (EMT) 20 000 Hz 50 us
Low frequency
Power Electronics Simulation
100 000 Hz 10 us
FEM PMSM Motor with Inverter 2 500 000 Hz 0,4 us
FPGAHigh Frequency
Power Electronics Simulation
5 000 000 Hz 0.2 us
10. One Core Simulation Capability
HYPERSIM
25x 3-phase buses
(75 nodes at 50us)
3 wind turbines
Detailed switching (50us)
72-pulses STATCOM
3-level (50us)
MMC Model / HVDC
Up to 1500 cells at 25us
Power Electronics
128 Nodes per FPGA at 200ns
MMC
1500 cells per FPGA at 500ns
Motor Model
FEA at 250ns on FPGA
eFPGAsim
10 000 Nodes
With breakers
(Transient Stability at 10 ms)
ePHASORsim
12 cores
11. Our products include
Test Management and Automation
Automation, Data Processing, Reporting
Simulation Tools
Solvers, Block sets, Advanced models
Hardware
Simulator Chassis, FPGA and I/O Boards, Protocols, Accessories
Services
Consulting, Studies, Training, Commissioning, Integration
13. What is HYPERSIM?
• Real-time simulator for Electro-Magnetic
Transient analysis
• Used for HIL Testing of critical controls
connected to grid
• Offline simulation, fast simulation
• Detailed Wind power plant simulation
14. What is HYPERSIM?
Based on decades of
research by Hydro
Quebec
Also developpers of:
SimPowerSystems
15. The Origin of HYPERSIM
Hydro-Québec’s Network Simulation Center
• HQ developed an analog simulator
Motivation: Quebec power network is
special
• Power generation is very far away
from city.
• Many long lines. Requires a lot of
active compensation.
Focus: Real-time network simulation.
• Needed to design new 735-kV line
and specify the equipment
(insulation co-ordination) using
statistical technique
• Needed to test REAL controllers for
an unstable network
• The real-network is not available
(7 years to built)
• Cannot disconnect the real power
grid for test purpose!
16. What is HYPERSIM?
Venture between OPAL-RT &
Hydro Quebec
Large scale real-time EMT
simulator
Validated and proven models
17. What is HYPERSIM?
Parallel processing made easy
Offline and Real-time Display and
Data Processing
Automatic Test Control Software
18. What is HYPERSIM?
I/O Rack
ABB SVC Controller Testing with HYPERSIM
Workstation Controller
under test
• Chenier Static Var Compensator (Quebec)
• Levis Synchronous Condenser (Quebec)
• Langlois Variable Frequency Transformer (Quebec-USA)
19. What are the Application Domains?
Everything related to generation, transmission and distributions
power systems
Energy storage,
FC, capacitor bank
PV, MicroGrid,
PHIL
WindFarm,DER
Motor, Load,
Generator
MMC, HVDC, FACTS,
SVC, STACOM
Smart Grid,
SCADA
EV, HV Relay, PMU,
Control
20. What are the Application Domains?
Everything related to generation, transmission and distributions
power systems
• Perform a study of large and complex
electrical power networks
• general AC system operation from generation to
distribution;
• interaction between AC and DC systems;
• interaction between different power system controllers;
• fault analysis
• Do closed-loop testing of control system
• Develop, improve and assess new protection
and control concepts
21. What are Benefits?
EMT simulation and real-time HIL testing has proven to
be very cost-effective
• Testing of Control and Protection
• Commissioning of interconnections
• Operating strategies
• Optimisation and settings
• Maintenance and training
• New concepts validation
22. What are main features?
Scalability & Power
• Modeling scalability for large networks
• More than 2000 x 3-phase buses
• Extreme scalability using COTS SGI computers or
INTEL motherboard (Supermicro)
• Automatic task mapping
• I/O scalability
• more than 3500 I/Os for MMC controller certification
• supports many communication protocols and many
devices
23. What are main features?
High Scalability using SGI Computer
128 Cores
1 TB Memory
Two sockets
16 Cores
Up to 125 Go Ram
From 16 to 2048 cores
using 4 Racks
Two sockets
16 Cores
Up to 125 Go Ram
+ 2 PCIe Slots
1 IRU
24. What are main features?
OP5600 OPAL-RT Real-Time Simulator
Great computation power
• Powerful real-time target (12 CPU cores 3.46 GHz)
• Xilinx FPGA (Spartan 3 or Virtex 6)
• Real-time OS (Linux Redhat)
• Distributed parallel computation
Huge I/O capabilities
• Up to 128 analog I/O or 256 digital I/O or a mix of both
• Rear D-Sub 37 connectors for external devices
• Front I/O monitoring (access to all I/O lines)
• Many chassis can be connected together of larger I/O lines amount
Connectivity
• Up to 4 PCI slots
• Embedded hard drive for real-time data logging
• Support for 3rd party I/Os and communication protocols (IEC61850, UDP/IP, CAN,
ARINC, MIL1553, IRIG-B, DNP3.0, C37.118, etc…)
25. What are main features?
Conviviality
• Offline simulation is possible
• No need to use dedicated RT simulator
• Model recompilation in a few seconds, Task mapping
• Breaker sequence interface
• ScopeView user friendly software
26. What are main features?
Openness
Import EMTP-RV
network
Interface with Simulink & SPS
Custom C-Code and library
27. What are main features?
Models
CT , PT models
Virtual IED and
relay library
Generator, transfo, line, motor, load
Power electronic and switches
28. CEPRI - State Grid Simulation Center
HYPERSIM in Action …
29. HYPERSIM in Action …
HVDC controllers
under test
I/O Racks
Outaouais HVDC Interconnection, (Quebec-Ontario)
Châteauguay HVDC Interconnection (Quebec-USA)
Radisson-Nicolet-Boston Multi-terminal HVDC line
Hydro Quebec Installation at IREQ – HVDC Controller Replica
39. Some customers …
Power Grid MTDC Project India
Replica of the Nanterre SVC project
HVDC/AC and FACTS studies
Real-time simulator for power systems
HVDC and FACTS (SVC) control replica
and protection relay testing
CEPRI
EPGF
Siemens SVC integration
Protection relay testing
43. Hardware Solutions
OP5600 - OPAL-RT Real-Time Simulator
Great computation power
• Powerful real-time target (12 CPU cores 3.46 GHz)
• Xilinx FPGA (Spartan 3 or Virtex 6)
• Real-time OS (Linux Redhat)
• Distributed parallel computation
Huge I/O capabilities
• Up to 128 analog I/O or 256 digital I/O or a mix of both
• Rear D-Sub 37 connectors for external devices
• Front I/O monitoring (access to all I/O lines)
• Many chassis can be connected together of larger I/O lines amount
Connectivity
• Up to 4 PCI slots
• Embedded hard drive for real-time data logging
• Support for 3rd party I/Os and communication protocols (IEC61850, UDP/IP, CAN,
ARINC, MIL1553, IRIG-B, DNP3.0, C37.118, etc…)
44. Hardware Solutions
Front view
Back view
Top View
1A
1B
2A
2B
3A
3B
4A
4B
Convenient BNC
connectors
Interface a scope for
monitoring (Isolated
interface)
Monitoring Panel
Enables to tap every
signals from the front
DB37 Connectors
Interface I/O signals
8 Mezzanines
Insert the proper analog
& digital mezzanines
OP5600 - OPAL-RT Real-Time Simulator
45. Hardware Solutions
ID # Description
OP5340K1 Analog Input Card (16 Channels, 16 bits, 2.5 us, ±16V)
OP5330K1 Analog Output Card (16 Channels, 16 bits, 1 us, ±16V)
OP5353K1 Digital Input Card (32 Channels, Optocoupler, 4.5V to 30V)
- 32 Static Input Channels
OP5353K3 Digital Input Card (32 Channels Optocoupler, 4.5V to 30V)
- 16 PWM Frequency or Time Stamp Digital Input
- 16 Static Input Channels
OP5353K2 Digital Input Card (32 Channels Optocoupler, 4.5V to 30V)
- 32 Static or PWM Frequency or Time Stamp Digital Input
OP5354K1 Digital Output Card (32 Channels, Push-Pull, galvanic isolation 5V to 30V)
- 32 Static Output Channels
OP5354K3 Digital Output Card (32 channels, Push-Pull, galvanic isolation 5V to 30V)
- 16 PWM Frequency or Time Stamp Digital Output
- 16 Static Output Channels
OP5354K2 Digital Output Card (32 channels, Push-Pull, galvan isolation 5V to 30V)
- 32 Static or PWM Frequency or Time Stamp Digital Output
OP5600 Available I/O Mezzanines
46. Hardware Solutions
OP7000- OPAL-RT Real-Time Simulator
FPGA-based real-time simulator
• Equipped with 1 to 4 FPGA VIRTEX 6 boards
• Executes models on FPGA (time step below 500 ns)
• Supports eFPGAsim electrical system, floating-point
simulation solvers
• High-speed interconnection with OP5600 simulators
Huge I/O capabilities
• Up to 128 analog I/O or 256 digital I/O or a mix of both
• Rear I/O connectors (DB37 or BNC)
• Front I/O monitoring via BNC (up to 16 I/O lines can be monitored
simultaneously)
• LED status for each I/O line
• Optical fiber for digital lines available
47. Hardware Solutions
OP8620 Interconnection Box OP8610 Break-out Box
Fault Insertion UnitLoad Box
Accessories
Turnkey HIL Test Bench
Mapping Box
FIU
Breat-Out Box
Load BoxThird Party
Real-Time Simulator
48. Firmware-Drivers Solutions
Communication Protocols
Electric Systems
DNP3 C37.118 61850
MMSIRIG-B
1588
60870Modbus
Automotive and Aerospace
CAN FlexRay LIN
1553
ARINC
429
Generic Protocols
RS-232 RS-422 RS-485
RFMTCP/IP
Control and Automation
OPC FieldBus Ethercat
51. What is eFPGAsim?
• Power electronic real-time simulator
• HIL testing
• Feasibility studies
• Protection and control design
• Include an ultra fast solver on FPGA
52. What are the Application Domains?
• Complex converters
• PV, Wind farm
• Microgrid
• Motor drive
• Hybrid and electric vehicle
53. What are the Challenges?
Scalability
• High number of switches and I/Os
• Numerous converters
High speed
• Fast rotating machine
• Fast switching (PWM frequency is high)
• Protection - Fast response needed
Precision
• Position of the rotor
• Short lines
56. What is needed?
• Low latency
• High resolution & small time step
• Non-averaged model
• Fault capability & transient analysis
FPGA
Automatic Model
Generation
Circuit Editor
57. What are the limitations of FPGA
technology?
• FPGAs are difficult to program
• Generation and flashing is long
• Easier to program - schematic editor)
• Save reprogramming time
• Save generation time
• Online parameter modifications
59. eFPGAsim in Action …
PV simulation and interconnection with the grid
Vgrid
A
B
C
a
b
c
Three-Phase
Breaker
A
B
C
A
B
C
Resistance: Ri
Inductance: Li
A
B
C
A
B
C
Three-Phase
Series RL
Resistance: Ri
Inductance: Li
A
B
C
A
B
C
Three-Phase
Resistance
Resistance: Rgrid
A
B
C
A
B
C
Three-Phase
Parallel RL
Inductance : Lgrid
Resistance : Rdamp_Lgrid
A
B
C
A
B
C
Three-Phase
Inductance
Inductance: La
Capacitance:
DClink_C
Resistance:
DClink_R
+
-
PV Subsystem
Delta
Capacitance : Cf
g
A
B
C
+
-
g
A
B
C
+
-
2-level IGBT/Diode
Controllers
CPU1 - Ts = 20usFPGA - Ts = 500usCPU1
CPU2 – Ts = 100us
62. Test Automation
OPAL-RT provides many tools for performing Test Automation
ScopeView
Offline and Real-Time Waveform Display and Analysis
TestDrive
Instrumentation software and HMI testing platform
TestView
Automatic Test Control Software
Python
Flexible and easy to use scripting API
Third party tools
TestStand, Diadem, Matlab, …
63. ScopeView - Offline and Real-time
Display and Data Processing
Display signals and waveforms …
SCOPEVIEW let you:
Perform data processing
Import / Export data &
Produce reports
COMTRADE
as an analog oscilloscope
64. Create, load and save templates … to process data faster!
ScopeView - Offline and RT Display and
Analysis
SCOPEVIEW let you:
65. TestDrive - HMI for RT testing application
Connect models with LabView …
Test Drive let you
and takes the best of two tools
Create rich user interface
Simplified and integrated
scripting using Python.
66. TestDrive - HIM for RT testing application
Display very fast waveforms acquired from FPGA with the
Virtual Scope
Test Drive let you
67. TestView - Automatic Test Control
Software
Automate test sequences, perform intelligent data
management … guaranty results integrity and test reproducibility
• Create complex studies
with thousand of tests
• Scripts and macros
• Play back recorded data
68. TestView - Automatic Test Control
Software
Perform statistical and Monte Carlo analysis
Find non functional condition
69. TestView - Automatic Test Control
Software
Define execution flow using conditional steps such as : for, while, if
70. TestView - Automatic Test Control
Software
Tune parameters and control breaker sequence
• Incremental, uniform and Gaussian
distribution
• Relative reference Time
• Breaker and switch type
• Phase / Command mode
71. TestView - Automatic Test Control
Software
Perform post-processing and offline analysis using ScopeView
73. Python - Flexible and Easy to Use
Scripting API
Execute your sequence using scripts and simulator API
1 Edit script
2 Run script
3 Display results in console
7 View & Debug Thread 4 View Variables
6 Interactive command line
5 Add Breakpoints
• Start/stop /Restart simulator
• Change parameters
• Acquire waveforms
• For loop, While, If conditions
• Create reports using Excel/Word
• Configure simulator
74. Third party tools
Use also Matlab to perform numerical computation,
visualization, and programming
MATLAB
75. Third party tools
Use TestStand to develop automated test using
our simulator API and steps
Test Stand
77. What is ePHASORsim?
Real-time transient stability simulator
• Large-scale power systems
• Transmission, distribution and generation
Phasor domain solution
• Nominal frequency
• Positive sequence (transmission system)
• 3-phases (distribution system)
• Time step in the range of few milliseconds
88. MMC
Application Example : Modular Multi-Level Converter
Siemens Energy Sector - Power Engineering Guide - Edition 7
89. What are Applications and
Advantages of MMC Converters
High Voltage
• HVDC such as SIEMENS HVDC-Plus and
ABB HVDC-Light
Medium Voltage
• STATCOM
• Motor drives
• Grid connection of renewable energies • Low PWM frequency
• Reduced switch losses
• Low ac harmonic content (THD)
• No need for a filter
• Continuous currents
• Fast recovery from short-circuit
• Reliability
• Reduce stress on components
90. What are Advantages and
Applications of MMC Converters
Pole controller Valve controller
MMC Station MMC Valves
91. How it works?
Vdc+
Vdc-
Vac
• Building block is a cell
• Two-terminal cells provides
a unipolar or bipolar
voltage
• Capacitors in each cell
• Serial connection of cells to
form arms
• Sum of all SM capacitor
voltage in 1 arm equals two
times the dc link voltage
• At any given time, only half
SM output their capacitor
voltage.
92. What are the MMC characteristics?
• DC-link voltage is controlled by switch
states (fast)
• Arm currents are continuous
• Commutating inductors are in arms
• Capacitor voltage has to be balanced
93. What are the challenges?
• More components
• Design and validation of controller
is complex
• Need advanced tool for validation
• But also more challenge for real-
time simulation
• Number of switches
• Number of I/Os
94. What are the challenges?
Control Objectives
• Active and reactive power regulation
• Capacitor voltage in SM to 1 p.u.
• Dc link voltage to 1 p.u.
• Capacitor voltage in all SMs is balanced
• Minimize circulating current
• Minimize zero sequence current injecting
into the grid
95. What are the challenges?
Control objectives
Phase currents (Ia)
• Equal upper & lower power contribution
• Minimizing zero-sequence current
Arm currents (Iupa)
• Equal 3-phase power contribution
• Minimizing zero-sequence current
• Minimizing circulating current
DC currents (Idc)
• Equal 3-phase power contribution
• Minimizing zero-sequence current
96. What is our solution?
Advanced valve and pole controllers
Versatile I/O interface
• Thousands of analog and digital
channels
• Customized Ethernet protocol
(Aurora – Gigabit)
• Using massive optical fibers
• Precise IGBT I/O firing signals
Detailed MMC model for HIL and RCP
and various topologies
Strong capability of fault
simulation
97. What is our solution?
CPU Models
• Supporting MMC 1P and 2P
• Unlimited number of cell per arm
• Taking several CPU cores to
calculate the models
• 1 CPU can solve 300 cell at a time
step of 25 us
• Providing Vcell-cap debugging mode
to help user developing their
controller
98. What is our solution?
FPGA Models
• Support MMC 1P (will support MMC 2P at request)
• For 1 FPGA VIRTEX 6 (OP7000 system)
• up to 500 cell/arm * 3 arm, or 1000 cell/arm.
• VIRTEX 7 FPGA: 1500 cells with OP7020 system
• Support multiple FPGAs.
• no CPU resources to calculate the models,
• MMC block calculates at a time step of 250 ns or 500 ns
• PWM generation and capacitor voltage balancing
algorithm embedded in FPGA
• Providing Vcell-cap debugging mode to help user
developing their controller
100. Some MMC customers …
HIL test controller 8*6/2 terminal
Fast simulation : 100*6 / 2
Simulation of a 3-terminal MMC
HVDC project : 500*6/2
Rapid Control Prototyping : ?*?/5
Simulation a 3-terminal MMC HVDC
project and validation its controller
200*6/3
CSG
HIL Testing, Simulation of a 5
terminal MMC HVDC project :
220*6/5
XJ Group
SPERI
102. The traditional relay testing approach …
Relay under testOmicron, Megger, Doble Test Sets
Replay offline simulation
Recorded data from field Limitations
• Open loop
• Fixed V/I (ramp, constant, …)
• Close to operating point
This is a good and proven method for
most “traditional” and “easy” cases
103. … is enhanced by a real-time simulator!
Relay under test
Real-Time
Simulator
Real-time simulator are used by advanced testing laboratories for
complex cases and developing/testing new relay algorithms using new
technologies…
Advantages
• Closed loop
• Detailed EMT simulation
• Complex protection schemes
• See effect of the relay on grid
104. Increased number of relay
functionalities
New and more complex applications
New type of equipment and
large scale system
Merging
Unit
PDC WAM
PMU
Interoperability and new communication
protocols
DNP3 C37.118 61850
MMS OPC UAIRIG-B 1588
What are the New Challenges?
OIT
106. CT , PT models Virtual IED and
relay library
Generator, transfo, line, motor, load
Power electronic converters
Rich model library
What is our solution?
107. Import EMTP-RV
network
Interface with Simulink controls
Broad spectrum of
drivers and protocols
DNP3 C37.118 61850
MMS OPC
IRIG-B 1588 User
Versatility and Flexibility
Custom C-Code and library
What is our solution?
108. Communication
failure
Loss of packets
Corrupted data
Data overflow
etc. Fault and disturbance
Fault location, type and interception angle
Apparatus internal fault
Simultaneous
events
What is our solution?
109. TestView
Scripts and macros
Play back recorded data from field
Perform Monte Carlo analysis
Generate reports automatically
Save results in a database with full
documentation for future test auditing
Test Automation and DB
Intelligent data management
Various export
format
COMTRADE
ScopeView Analysis
What is our solution?
110. Typical relay configuration
Using IEC 61850
• Sampled values (V/I)
• and Goose (Trip Command)
Using amplifier or low voltage interface
• Analog out (V/I)
• Digital I/O (Trip/Command)
112. Relay Design Methodology
Loss of synchronism (RPS)
Stage 3 – Simulink Implementation
Stages 4, 5 – Industrialization
• Proof of concept
• New industrial product
• Real-time homologetion tests
(10988 tests) using Hypersim
Code Generation
RPS acceptance tests
113. Wide-Area Control System (WACS) Vision
Combined remote and local data to take better decision
Actions << 200 ms
114. WACS Simulation on HYPERSIM
PT/CT - V/I
C37.118
SSU - Local Controls
HYPERSIM
PDC
PMU
C37.118
Digital -
IEC61850C37.118
Substation Synchronous Unit (SSU)
Multiband Power System Stabilizer (MBPSS)
116. OPAL-RT Offers a Complete Range of
Solutions for Engineers …
Power GridPMU/PDC
Rapid Control Prototyping Hardware-in-the-loop (HIL)
Simulation
PMU & PDC validation
WAMPAC testing
Software-in-the-loop
Design, improve, asses PMU and PDC
117. WAMS HIL Testing with HYPERSIM
Power System
C37.118
PMU
AIO/SV
Network control center
SCADA + Operator
PDC
Power System
C37.118
Simulated PMU
118. WACS HIL Testing with HYPERSIM
Network control center
Power System
PMU
C37.118
Relay, IED
SPDC
C37.118
Control Substation
Relay, IED
SSU
PSS
AVR
SVC
PDC
MODBUS, DNP3, 60870, 61850
DIO/SV
SCADA + Operator
WACS Tasks
• Generator load dropping
• Reactive power switching
• TCSC/SVC Modulation
• TAP Changing
• …
Power System
Actions << 200 ms
Simulated PMU / PDC
119. Some RCP and HIL Applications
Monitoring
• State estimation
• Date historian, data mining and data archiver
• Faut location estimator
• Oscillation monitoring
Control & Protection
• Generator dropping / load shelding
• Reactive power switching
• TCSC/SVC modulation
• TAP changing
• Voltage, frequency and rotor angle stability
• Thermal overload remedial
• event based remedial action
• Optimal PMU placement
129. Why using a simulator for WPP?
• Perform large-scale WP integration
studies (real-time or off-line)
• Control prototyping
• Model validation
« While traditional synchronous generation
modeling relies on physics, Wind Generation
modeling is all about controls…»
130. Modeling the Wind Turbine
Nacelle, Gear Box, Wind
DFIG Model
Generator Control
Grid and Collector
• Detailed converter
• Controller
• Integration of manufacturer models
• User defined models
• Simulink, C code
• Power train model
• Wind model with Kalman filters
131. Modeling the Wind Power Plant with
all Turbines
3 phases fault
1 phase fault
• Control interaction,
• Resonance,
• Harmonic/inter-harmonic emissions,
• Voltage flickers
• Inertial response
• Fault current contribution of WT/WPP
• Impact of individual control and protection
• Situation where only few turbines trip
132. Modeling Large Scale WP Integration
• Resonance
• Stability analysis
• Operation strategies
• Interaction with SSR
• Use the aggregation techniques of
wind power plant
133. Some customers …
HIL testing of MMC controller used for
grid-connected wind farms
Real-time simulation of large-scale wind
farms integrated into the electric grid
HIL test of the controllers of DFIG drives
used for grid-connected wind turbine
RCP of DFIG drives used for grid-
connected wind turbine
135. What is our HIL/RCP Laboratory?
Conduct experiments in the fields of
- Electrical machinery,
- Power converters and
- Wind energy generation.
Study, design and test
- Power electronics controls
- Validation of model against experimental results
- Integration of renewable energy sources into the
grid
- System behavior under nominal and extreme
condition
136. What is our HIL/RCP Laboratory?
- Design control strategies using RT-LAB and
Simulink/SPS/Stateflow
- Total integration of Lab-Volt laboratory with OPAL-
RT chassis and conditioning module
- Step-by step tutorial and operational
demonstration
137. What is our solution ?
It is composed of :
Lab-Volt hardware kit
(0.2-kW or 2-kW). Real-time simulator
Signal conditioning interface
138. What is our solution ?
Lab-Volt Hardware
0.2-kW Electromechanical Training System
- test multiple control algorithms on
- DFIG, PMSM BLDC and Induction Generator
139. What is our solution?
Lab-Volt Hardware
2-kW DFIG Lab-Volt’s “Renewable Energy” System
- More realistic and efficient generators
- Suite for micro grid applications
- Four quadrant dynamometer (torque, speed
control)
- Emulate wind variation.
- Design control algorithms to optimize the amount
of active power pushed to the grid.
- Different types of generators available
145. SV
C
SV
C
SV
C
SV
C
SV
C
SV
C
• 8 x 12-pulse AC-DC Converters and Controllers
• 6 SVCs and Controllers
• Several AC Filters
• 24 DC Filter Banks and DC Lines
• Several AC Machines and Controls
• 50 micros, 6 CPUs for Power System (XEON 2.3 GHz)
MULTI-TERMINAL HVDC SYSTEMS