Embedded c,c++,RS232,RS485,UART,USART,SPI,I2C.Data Acquisition(labVIEW).

1. P.PRASATH
CONTATCT : +91 9894938971
E-MAIL : rajendraprasath90@gmail.com
JOB OBJECTIVE:
To work as a Design and Test engineer in an environment conductive for innovative
experiences, which would offer me a knowledge base, to enhance my talent, exposure
and zeal of knowledge which in turns benefits the organization.
EDUCATION:
Course Domain Duration Institute Grade
Master of Science Electronics &
Instrumentation
2013 Bharathiar
University,
Coimbatore
67%
Bachelor of Science Electronics 2011 Syed Hameetha
arts & science
college, Kilakarai,
Ramnad
68%
12 th std Computer science 2008 St. Arulananthar
higher secondary
school,Oriyur,
Ramnad
65%
SSLC State board 2006 St. Xavier high
school,Savariar
pattinam,
Ramnad
81%
EXPERIENCE DETAILS:-
 3 Years of experience in Testing and Automation Domain(EMBEDDED,labVIEW)
 Currently working as Projectengineer at FALCON SQUARE Pvt. Ltd,
Coimbatore.[2013-2016]

2. CERTIFICATION:-
 90% mark scored in CERTIFIED LABVIEWASSOCIATE DEVELOPER.
 Completed "ProcessAutomation Using PLC& SCADA (AB SLC 5/04 AND RS VIEW
32) in Prolific System and Technology,Coimbatore
SKILL AND RESPONSIBLITIES:-
 Experienced in Programming language such as LabVIEW and Embedded C for
automated test equipment development,
 Good hands on experince in hardware troupleshooting and softwaredebugging,
 Hands on Experience in Requirement Analysis ,Software architecture design,
Integration and system testing
 Well knowledge in Instrumentation and Sensors aspects.
 Good exposure in Data acquisition system and Communication protocolsuch as USART,
RS232, SPI,I2C, Universal serial bus (USB) and TCPIP.
PROJECT DETAILS:-
Title : EASY FIT (CONTROL UNIT FOR FITNESSMACHINE)
Organization : FALCON SQUARE
Components used : PIC16F877A IC, RTC, Relay, Keypad, 16x4 LCD, IR Sensors.
Responsibilities : Application software development.
Description:
 This project contains five units such as input unit (Keypad),
output unit (Alarm, Relay, and 16x4 LCD display), Sensor
unit(IR Sensors), Power supply and detection unit and
controller unit (PIC16F877A) .This project used to control the
on timings of the dc motor.

3. Title : GSM BASED WATER PUMP CONTROL
Organization : FALCON SQUARE
Components used : ATMEL (at89s51), Relays, GSM module
Responsibilities : Application software development.
Description :
 This project presents the emerging applications of the GSM
technology.
 Using the public GSM networks, the water pump is controlled
remotely by calling to the GSM module interfaced with the
controlling unit. We can control the water pump by calling or message
to the controlling unit.
Title : FALCON AUTOMATION TEST EQUIPMENT
Organization : FALCON SQUARE
Responsibilities : Design and development in LabVIEW
Description:
 DUT of this project is smart system of Falcon which is used for home
automation purpose. This DUT Contains Various I/O channels including
Digital and Analog output channels to interact with real-time sensors.
 Scope of this project is used to test the firmware functionality of this
product by validating the status of I/O channels at different testing
criteria,
 I have developed Test application with help of LabVIEW and NI PCI DAQ
(6221) to accomplish the testing and validation of this product.

4. Title : PROTOTYPING OF HIGH-END NON INVASIVE SALIVARY
GLUCOSE ESTIMATION WITH PRE-EMINENT GLUCO-MASTER
Organization : FALCON SQUARE
Responsibilities : Designed the complete product using embedded systems.
Description:
 Main Objective of the project is to design and develop a system to diagnose
glucose among patients without blood serum.
 Scope of the project in embedded system is to read the absorption of light
through the standard and sample after amplification and to generate high
précised result.
 I have designed amplification circuit using Texas Instruments op-amp cp07
to determine absorption of light through standard and patient sample and
the amplified output is given to the controller to get output using beer
lamberts’ law.
KNOWLEDGE ENHANCEMENT
 Attend the workshop on “Image Processing and Its Applications” held on
17/09/2012, organized by the Department of Electronics and Instrumentation,
Bharathiar University, Coimbatore, in association with Benchmark Electronics
Systems(P) Ltd, Chennai -85.
 Attend the State level seminar on “Mechatronics” held on 18/03/2010 organized by
the Department of Electronics and Electronics Students Association (ESA),
Government Arts and Sceince College, Paramakudi.
 Attend the training in “Entrepreneurship Development Programme” conducted by
the MSME (Micro Small Medium Enterprises) Development Institute, Tuticorn.

5. PERSONALDETAILS
Date of Birth : 19th April 1990
Present Address : 106-A1, Sripathy Nagar, Nanjundapuram Road, Coimbatore-641036
Nationality : Indian
Status : single
Passport : Passport holder
Languages Known : English, Tamil
DECLARAION
I hereby conclude that the above given details about me are true up to my
knowledge.
Place: Coimbatore (P.PRASATH)