1. RESUME
NAME REDENTOR L. ROMERO
POSITION APPLIED Plastic Production Head
Address 113 Narra Street Lakeview 2
Putatan, Muntinlupa City
Contacts Mobile: 09177434216, Tel. No.808-12-80
CAREER SUMMARY
More than 15 years experienced in Injection Molding Process. I supervise the complete operation of the production
plans, schedule, control and overseas production operation to attain production goals of correct product quality, target
schedules and quality through effective utilization of material, manpower and machines.
WORK EXPERIENCES
ZELLER PLASTIK PHILIPPINES, INCORPORATION
Bldg. 3 Phil Crest Compound Km. 23, West Service Road, Cupang, Muntinlupa City.
July 2010 at Present
COMPANY DESCRIPTION
Zeller Plastik Incorporation is a global closure system company that manufactures plastic caps of J&J, Green Cross,
Tupperware, AVON, Splash, Uniliver, Coca-Cola and Pepsi.
ISO 9001-2008, HACCP, Food Safety System Certification
PRODUCTION SUPERVISOR
JOB DESCRIPTION
Supervise the entire operation from raw material to finished product. I monitor performance of Mold Technician, line
Technician, Process Technician, Team Leader Grinder, Mixer, Packer, and Operator
to check their task has been accomplished, and if it attain the standard output. Check Daily Production Report, Submit
monthly Over-all Equipment Effectiveness Report, Submit Weekly O.E.E. Report, Weekly Top Spoilage Contributor
and make improvement plan. Also accomplished 8 Discipline regarding Customer complaint. Implementation of
Company Rules and Regulation. Conduct tool box meeting before start operation regarding production issue. Check &
Monitor Safety, Good Manufacturing Practice, 5’S, Manpower Schedule.
SHINLIM INDUSTRIAL CORPORATION
Lot. 1 Block 11, Sepz, Laguna International
Industrial Park, Binan Laguna Philippines
March 3, 1994 to March 2009
ISO 9001-2000
PRODUCTION INJECTION MOULDING SUPERVISOR
COMPANY DESCRIPTION
2. ShinLim Industrial Corporation is a manufacturing of various plastic and rubber packaging materials for semi
conductor and electronics industries.
• Supervises all over operation on product process and product quality such as:
- Integrated circuit tray
- Integrated circuit reel
- Telephone case
- Case for electronics parts
- End pin for shipping tubes
• Supervises all over operation on process test and quality product in all incoming raw material such as:
- Polysulfone
- Polyethersulfone
- Polycarbonate
- ABS
- Nylon
- Acrylic
- Polyvinyl chloride
- Polystyrene
• Responsible for the operation and maintenance of Injection moulding machine, which are registered
from Korea Dong shin
• Supervises over all operation and maintenances of injection moulds which customer are:
- Sanyo Phils. - Maxon Phil’s.
- Texas instrument Phils. - Mitsumi Phil’s.
- Ionic’s Phil’s. - DAE Ryung Phil’s.
- ROHM electronics Phil’s. - Dai Yoon Phil’s.
- Motorola Phil’s. - Zilog Phil’s.
• Responsible for the operation and maintenance of different kinds of machines such as:
- Hoist motor 7.5 hp - Granulator machine
- Chiller machine - Mixing machine
- Compressor - Hopper dryers
- Mould controller - Oven machine
• Prepare daily production analysis on how to increase productivity and to decrease production losses.
• Prepare improvement plan for the weekly total losses and total output analysis
• Prepare work instruction for the individual item that already passes for each customer.
• Administrating technical training and information to the shift supervisor, operator with regards to
safety machine operation, product processing and product quality.
TRADESPHERE INDUSTRIAL COMMODITIES, INCORPORATION
Km. 16 south Super hi-way
Paranaque, Metro Manila Phil’s.
Sept. 16, 1993 to Mar. 01, 1994
ISO 9001-2000
PRODUCTION SUPERVISOR
COMPANY DESCRIPTION
3. Trade sphere Industrial Commodities Incorporation is a Manufacturing of various plastic packaging materials
for electronics, Medical parts, and beverages. Other services offered designed and mold fabrication.
JOB DESCRITION
• Supervises over all operation on product processing and product quality such as:
- Bottle - Cassette cases
- Caps - Audio, Video parts
- Lens Cover - Frames
- Tray - Cabinet
• Responsible for the operation and maintenance of 20 units injection molding machines and 5 units
blow moldings machines such as:
- Kawaguchi Injection Moulding Machine
- J. S. W. Injection Moulding Machine
- Toshiba Injection Moulding Machines
- Nigata Injection Moulding Machines
• Supervises over all operation on process test and product quality in all material such as:
- Polystyrene - Acrylic
- low density polyethelyn - Polycarbonate
- high density polyethelyn - Polyproplene
- ABS
• Prepare daily production report and submit it to the production manager
• Constantly keeping problems may arise in the daily production
• Conduct orientation to the production operator regarding accepted quality product.
ALSHARK PLASTIC AND PAPER FACTORY
Riyadh, Kingdom of Sandi Arabia
July 11, 1991 to Aug. 12, 1993
MOULD SETTER
COMPANY DESCRIPTION
Alshark Plastic and Paper Factory is one of the Biggest Company Production all kinds of plastic and Paper
other Services mould design, Fabrication, and repair.
JOB DESCRIPTION
• Responsible for mounting and dismounting of different kinds of moulds
• Responsible for the actual parameter setting for each item.
• Report to the production supervisor all the problem encountered regarding poor quality and low
quantity
• Perform test mould together with the production supervisor which ensure the quality are on the
standard specification.
• Perform test various incoming raw material such as:
- ABS - Polystyrene
- H.D.P.E. - Polycarbonate
- L.D.P.E. - Polypropylene
- Acrylic - Polyvinyl Chloride
4. FIL – YAMADA CO., LTD. INC.
Laspinas, Metro Manila Phil’s.
March 2, 19901 to June 30, 1991
LEADMAN OPERATOR
COMPANY DESCRIPTION
Fil-Yamada Co., Ltd. Inc. is a manufacturing of Plastic packaging for jewelry case.
JOB DESCRIPTION
• Report directly to the production manager in line activity
• Coordinates with quality control regarding problem on the production line.
• Responsible for evaluation analysis, testing of mould products prior to mass production.
- Inspection of incoming raw material and returned delivery product.
- Coordinates with the mould technician regarding mould problem encountered during
operation.
- Coordinate with the machine technicians regarding machine problems
- See to it the operator are working in good condition as well the machines are working in good
condition.
ECO PLASTIC, PHILI’S
Bagong Tanyag Taguig
Metro Manila, Phil’s.
Feb. 01, 1989 to Feb. 07, 1990
CADET ENGINEER
COMPANY DESCRIPTION
Eco Plastic is a manufacturing of Plastic Packaging for foods, and mould design
JOB DESCRIPTION
• Reports to maintenance manager for further instruction on task for the day.
• Executes assigned tasks with minimum supervisor and with the aid of standard operation manual and
process documentation.
• Coordinates with supervisor and update the incoming adjustment machines parameters setting
• Perform parameter adjustment on machines with newly mounted mould and with quality problems
• Prepare daily production analysis on how to increase productivity and to decrease production codes.
5. COMPUTER APPLICATION
MS Word, Excel
PERSONAL INFORMATION
Age : 51 yrs old
Place of Birth : Rosario, Pasig City, Phil’s.
Citizenship : Filipino
Religion : Roman Catholic
Status : Married
Sex : Male
Height : 165.1 cm.
Weight : 60 kgs.
Language : English, Tagalog
EDUCATIONAL ATTAINMENT
Primary : Bayanan, Elementary School
Muntinlupa City Phil’s
1976
Secondary : Jacobo Z. Gonzales Memorial
School of Arts and Trades
Binan , Laguna Phil’s
1980
College : FEATI University
Sta. Cruz, Manila Phil’s
1985
Course : Bachelor of Science in Electrical Engineering
PRC License : Passed the Licensure Examination for Electrical Engineer
License No. 0016423
June 1987
TRAINING / SEMINARS
ISO 9001 - 2000 Introductory Course Oct. 8, 11, 2002
ISO 9001 - 2000 Documentary Course Oct. 18, 19, 2002
ISO 9001 - 2001 Internal Audit Course Oct. 24, 26, 2002
Fire Drill Training May 15-16, 2007
Designing and Conducting Training Needs
Analysis October 22, 2010
NC and CAPA Workshop June 6-7, 2011
Risk Management Workshop September 13, 2011
Hazard Analysis Critical Points (HACCP) April 20, 2012
Food Safety Management System May 18-19,2012