2. Company Information
CEO Message
Mission/Vision & Core Values
Organization Chart
Raw Procurement Process
Production
Food Safety & Hygiene Management
3/20/2023 2
CONTENTS OF PRESENTATION
3. 3/20/2023 3
Company
Profile
Nilar Pulp & Paper
Co., Ltd.
Nilar Frozen Foods
Co., Ltd.
Nilar Holdings
Co., Ltd.
Nilar Ply
Co., Ltd.
United Nilar Agribusiness
Co., Ltd.
Advance Farming
Co., Ltd.
Nilar Biryani Co.,Ltd.
NILAR HOLDINGS GROUP
4. 3/20/2023 4
U TIN MYINT NI
We must focus on growing ourselves day by day.
Everyday is a new chance for us.
Our company‘s target is to engender world-class
materials, so we must cultivate our employees to the
world-class and grow our company altogether. This is
our Strength.
CEO & CO-FOUNDER
CEO MESSAGE
5. 3/20/2023 5
ORGANIZATION CHART OF NPC
Management (HOD)
Operation Section (HOS)
Non Operation Sub – Section
(HOSS)
Built Date - 7.7.2022
Update Date - 07.10.2022
Plywood Business Unit
Factory Manager
Nilar Yu
Plywood Business Unit
Factory Manager
Office
EiEi Phyo 2
1
Glue/ Cold Press/ Hot
Press
M&E
Department
M&E Office
Section
MechanicalEngineer
Electrical Engineer
Utility Operator
(Boiler, Compressor, DG &
Submersible Pump)
Production
Department
Mr Gulam
Mohammad Ansari
Sanding/ Sizeer/
Finishing
Crane & Forklift
1 1
2
2
2
4
Sale & Marketing
Department
1
Support Audit
HR
Department
Mya Thandar Cho
Admin
Department
Myint Naing
IT Reception Security
Driver
Domitory
Outdoor & Office
Cleaner
1 1
4
1 7
1
3
2
Finance&Account
Department
Senior Accountant
QA
Department
QC Assistant
QC
Section
1
3
Prepared by - Mr. Zayar Aung
Sale & Marketing
Section
2
Logistic
Section
Procurement
Section
Customer Service
Section
1
Color Code Description
Permeant Total
Manpower
R-0,G-176,B-80
R-255,G-0,B-0
R-255,G-255,B-0
R-255,G-0,B-0
R-0,G-176,B-240
R-236,G-160,B-98
Budget Submition Department
Operation Sub – Section
Supporting Staff
Operation Team
Supporting Team
Finance & Account
Total Manpower
14
17
7
10
35
20
103
CEO
Operation Audit Document Controller
3
1
3 3
Business License
1
1
Production Office
Section
2
HR – M
Section
1
1
CEO Office
Zayar Aung
2
Raw Procurement
Department
Mr. Tripthi
1
Marketing
U Min Aung Than
1
Logistic
Department
1
Procurement
Department
1
Veneer & Dryer
Log Yard
Work Shop
Resin Chemist
Section
1
S – 1, US - 2 2
2
Marketing Assistant
1
2
US - 10
Debarking/Peeling/
Clipper/Hand Chopping
S – 22,US - 23 2
4
2
2
Accountant
1
R-100,G-82,B-135
R-210,G-109,B-25
R-255,G-100,B-255
Temp Worker
Manpower
188
188
2
Cashier
1
General Store
1
General Store Helper
3
Extraction & Plantation
Htun Kyaw Oo
1
Extraction & Plantation
Assistant
1
1 1
52 188
25
8
S – 12,US - 12
S – 36,US - 36
S – 15,US - 15
US - 4
Admin Assistant
1
COMPANY ORGANIZATION CHART
6. 3/20/2023 6
Head Office
No.216, Nilar Tower, Anawrahta Road, Pabedan Township, 11141, Yangon, Myanmar
Factory Address
No.160, U Takyoke Kyee Street, Dagon Seikkan Industrial Zone (2)
Establish Since: 2013
No.160, U Takyoke Kyee Street, Dagon Seikkan Industrial Zone (2)
Capital
1.5 Million
Annual Revenue
USD 3 Million
Number of Employees
296 with 108 Permanent 108 Staffs and 188 Skilled Labor
Number of Employees
296 with 108 Permanent 108 Staffs and 188 Skilled Labor
100% Family Owned
Raw Material for Plywood production
Rubber
COMPANY INFORMATION
7. 3/20/2023 7
VISION OF NPC MISSION OF NPC
Being the business, which best
comprehends and fulfills
solutions for the interior's needs
business, by offering superior
goods and services.
To enable clients, staff, partners,
and shareholders to realize their
full potential and scale new
heights.
To create a long-lasting company
that values the greater welfare of
the community.
Through a disciplined, competent,
and committed team, we produce
and market high-quality plywood in
a range of price points to meet the
needs of Domestic and Commercial
customers. We also make sure that
our products are accessible and
readily available in all municipalities
of the markets we serve.
VISION AND MISSION
8. 3/20/2023 8
DEPENDABILITY UNITY
To create a stable and uplifting
workplace, we will continually
conduct our company in a fair,
dependable, and trustworthy manner
With our coworkers, clients, and
partners, we will be empathetic and
cooperative while fostering strong
bonds based on tolerance, mutual
respect, and cooperation.
RESPONSIBILITY PASSION
We shall maintain discipline and be
receptive to the nation, communities,
and settings in which we operate,
always making sure that we
contribute as much as we can to
society.
We will operate with dedication,
candor, and a sense of ownership.
CORE VALUES
11. Upon arrival, logs that are appropriate for slicing and peeling are
typically sorted in the log-yard according to size and species.
Depending on the weight and size of the logs, handling may be
done with heavy lift trucks, derricks, or cranes.
3/20/2023 11
PLYWOOD PRODUCTION PROCESS
(Log Yard / Log Conditioning)
Most timbers must be conditioned before peeling in order to
soften the wood and simplify peeling while producing veneer of a
suitable quality. The peeler blocks are subjected to conditioning by
being soaked in hot water vats, exposed to live steam, or sprayed
with hot water.
Log Yard
Soaking
12. The size that the logs are cut to depends typically on the
production at the time of cutting; the size of the finished panel and
the direction of the grain both matter.
3/20/2023 12
PLYWOOD PRODUCTION PROCESS
(Cutting / Debarking)
Logs are fed into a debarking machine as shown in the picture.
The cutting head on the track rotates backward with the log from
end to end as it rotates from the ridged wheels, removing the bark.
Its goal is to remove the bark without harming the timber.
Cutting
Debarking
13. With the use of a large rotary lathe, the markings left behind by the
debarking knives on the log are eliminated. The machine rotates
the log while cutting it with a long blade. With the exception that
the blade is parallel to the log when cutting, the method of cutting
is similar to sharpening a pencil.
3/20/2023 13
PLYWOOD PRODUCTION PROCESS
(Peeling / Reeling)
The next step after peeling is to make a continuous ribbon of
wood. As the log rotates and advances toward the lathe's cutting
edge, thin, continuous layers of wood are formed. Depending on
its intended application, the veneer can vary in thickness.
Peeling
Reeling
14. After being graded and sized, either manually or with high-speed
knives, the green veneer is next piled up and prepared for drying.
The sheet is then trimmed out to remove any flaws like splits and
knots.
3/20/2023 14
PLYWOOD PRODUCTION PROCESS
(Clipping / Stacking)
Clipping
The veneer sheets are stacked after clipping in order
to move them into drying machines and allow them to
cure there.
Stacking
15. 3/20/2023 15
PLYWOOD PRODUCTION PROCESS
(Clipping / Drying)
Drying
In order to facilitate the gluing procedure during the
production of the plywood, the veneer must be dried to a
moisture level of between 2 and 10 percent. The veneer
sheets may be kiln-dried or left out in the open to dry in
the air depending on where the plywood mill is located
and how advanced it is. When veneer is dried in a kiln, it
can be dried in batches or continuously as sheets are
automatically moved along a continuous belt or roller
system through the dryer.
Obviously a controlled drying environment, with minimal handling, will result in a more
uniformly dried veneer, with the least amount of damage. Veneer drying accounts for some 70
percent of the thermal energy consumed in plywood production and approximately 60 percent of
the mill's total energy requirement. For this reason new and improved drying systems are being
constantly developed, as well as the manner in which they are heated. Dryer heating may be by
the indirect use of steam or thermic oil, or direct firing with the temperature being controlled by
the regulation of the fresh-air make-up. Although drying temperatures of between 90-160°C
may be considered normal, increased temperatures of some 175°C are being used on certain
species in order to reduce the overall drying time.
16. After the sheets are appropriately assembled, they are bound together using adhesives. Depending on the
kind of plywood being made, this is the time to choose the adhesives. Typically, urea formaldehyde resins
are employed when the plywood is intended to be of the general or conventional kind. The adhesives used
in marine plywood, on the other hand, are melamine- or phenol-based.
By running the veneers through a glue spreading machine, mills may ensure that the adhesive is applied
uniformly to the veneer's alternative layers. Then, in layers with odd numbers, they will be combined into
panels. Depending on how many veneer layers are used, the finished plywood product's thickness will be
established.
3/20/2023 16
PLYWOOD PRODUCTION PROCESS
(Clipping / Stacking)
Glue Spreading
17. 3/20/2023 17
The assembled panels are then pre-pressed in a cold press under
controlled hydraulic pressure and ambient temperature. The
adhesive has adequate time to set up and successfully adhere the
veneer plys in each panel within the typical 20-minute operation.
This procedure aids in flattening the plywood as well as aiding in
bonding.
3/20/2023 17
PLYWOOD PRODUCTION PROCESS
(Cold Pressing / Hot Pressing)
Cold Pressing
Hot Pressing
The assembled panels are then pre-pressed in a cold press under
controlled hydraulic pressure and ambient temperature. The
adhesive has adequate time to set up and successfully adhere the
veneer plys in each panel within the typical 20-minute operation.
This procedure aids in flattening the plywood as well as aiding in
bonding.
18. Organized Farmers & Meeting With Farmers
To discuss the specific crops for the projects
To discuss the cultivation process
To negotiate the contract farming process
3/20/2023
Raw Procurement Process
18
21. 3/20/2023
Raw Procurement Process
21
Auditing Plantation Process
Land preparation process
Care and management of the whole growing season
Harvesting process
Pre-harvest chemical residue test for specific crops
27. Before starting production entire line thoroughly cleaned and
sanitize with 50ppm chlorine, contact time is 20 mins post that we
will rinse with cleaned water.
Every four hours of production we will change cleaned chilled water
from chill water 1 & 2. This step will nullify bacterial growth.
Every 30 mins enzyme test conducting by the QA, if any deviations
noticed immediately production will be stopped post confirmation
will start the line.
All critical product temperatures like blanching, Chill water 1&2
and IQF Temperature will be checking and recording of the same
timely. Frequency every 60 mins.
Production SOP’s
3/20/2023 27
29. Test 3 items of bacteria of product.(E coli, Coliform and TPC.)
daily according to sample procedure.
Test the water bacteria daily by sample procedure.
Test the hygiene of tools by sample procedure.
Check the products shelf life every six months.
Make the sampling procedures
Keep the sample for every lot to test product shelf life.
Prepare and arrange to test Agro Chemical Residue at OMIC
BKK Lab.
Microbiological Lab
3/20/2023 29
30. Food Safety and Hygiene Facility
Slipper Rack
Foot Washing
Air Shower
Hand Washing
GMP Suit
3/20/2023 30
31. Personal Hygiene
Food Safety
Work Safety
Food Safety and Hygiene Facility
3/20/2023 31
32. Prepared by
Phyo Zaw Aung
Thank You
Doc: No. NFF-OFF-DOC-001-00
Issued Date : 1-Nov-2021
Revision No. : 00
Revision Date : N/A
3/20/2023 32
Nilar Frozen Foods Company Limited
