SlideShare una empresa de Scribd logo
1 de 3
Rodney L. Hipsher
Hipsherrodney@gmail.com
3727 Raccoon Valley Dr.
Powell, 37849 Tn.
(865) 765-6656
Skills
 Experience with troubleshootingcomplex systems
 Experience with readingblueprints
 Experience with layingoutfixturelocations
 Experience with usingscissorlifts,aerial lifts,forklifts,backhoes,and other heavy equipment
 Experience with PVC pipe, screw pipe, copper pipe, and steel pipe, gluing,threading, soldering,brazing,and
welding.
 Experience with precision instruments,in-regards to,dial indicators, Vernier calipers,micrometers,torque
wrenches, and feeler gauges
 Experience with electrical and hydraulicschematics
 Experience with soldering,de-solderingcomponents from circuitboards.
EMPLOYMENT HISTORY
Aircraft Technicians Inc. 11/15-Present
Po Box 1026 Alcoa, Tennessee 37701
(865)740-6406
A+P Mechanic
 Performed on-call maintenance.
 Performed 3-day checks, Service checks, Routine checks, Airframe 500 Hour
inspections, and APU 500Hour inspections on CRJ 200/700/900s.
 Changed NLG and MLG tires as well as brakes on CRJ 200/700/900s.
 Performed any necessary maintenance on CRJ 200/700/900s from the radome to the
aft tail NAV light.
Kalitta Air 06/15- 10/15
Oscoda, Michigan
A+P Mechanic
 Assist the team in the maintenance of large jet aircraft.
 Able to follow instructions, and job duties that were left to be accomplished as a single member
of the team.
 Able to perform job tasks without supervision.
 Aircraft worked on as follows: MD-80, B737, B747, B767
 Removed, Re-installed, and adjusted outboard flap fairings on B767
 Removed and replaced right windshield on MD80
 Removed and replaced auxiliary waste tank on B737
 Removed and replaced toilet on B767
 Removed and replaced hydraulic fittings on B737
 Removed and replaced hydraulic pump on B767
 Sanitized potable water system on B767
 Removed and replaced Emergency slide on MD80
 Replaced O-ring seals on fuel/oil heat exchanger on JT-8 on a B737
Other duties as required
Rodney L. Hipsher
Hipsherrodney@gmail.com
3727 Raccoon Valley Dr.
Powell, 37849 Tn.
(865) 765-6656
(Continued)
Shoffner Kalthoff Mechanical Electrical Service 05/06 - 08/13
3600 Papermill Dr, Knoxville, TN 37909
(865) 523-1129
MasterPlumber
 Experience with reading blue prints
 Experience with laying out fixture locations
 Experience with using scissor lifts, aerial lifts, forklifts, backhoes, and other heavy equipment
 Experience with PVC pipe, screw pipe, copper pipe, and steel pipe, gluing, threading,
soldering, brazing, and welding.
Other duties as required
EDUCATION
04/15 Powerplant certificated by Federal Aviation Administration
10/13 – 04/15 Aviation maintenance Technology certificate of completion from Tennessee College of Applied
Technology of Morristown
09/14 Airframe certificated by Federal Aviation Administration
04/08 - 05/11 PHCC Apprenticeship program
05/11 Journeyman Plumbing License
12/06 Diploma of completion from Halls High school
REFERENCES
Furnished upon request

Más contenido relacionado

Destacado

Aula Jonatas 50: Pequenos cristos
Aula Jonatas 50: Pequenos cristosAula Jonatas 50: Pequenos cristos
Aula Jonatas 50: Pequenos cristosAndre Nascimento
 
Legislación Española completa sobre Prevención de Riesgos Laborales
Legislación Española completa sobre Prevención de Riesgos LaboralesLegislación Española completa sobre Prevención de Riesgos Laborales
Legislación Española completa sobre Prevención de Riesgos LaboralesAlfredo Vela Zancada
 
Esthetics in maxillofacial prosthesis/prosthodontic courses
Esthetics in maxillofacial prosthesis/prosthodontic coursesEsthetics in maxillofacial prosthesis/prosthodontic courses
Esthetics in maxillofacial prosthesis/prosthodontic coursesIndian dental academy
 
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLYARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLYManiroop Badam
 
Digitalización de Autónomos y pymes en España 2016
Digitalización de Autónomos y pymes en España 2016Digitalización de Autónomos y pymes en España 2016
Digitalización de Autónomos y pymes en España 2016Alfredo Vela Zancada
 

Destacado (6)

Aula Jonatas 50: Pequenos cristos
Aula Jonatas 50: Pequenos cristosAula Jonatas 50: Pequenos cristos
Aula Jonatas 50: Pequenos cristos
 
Legislación Española completa sobre Prevención de Riesgos Laborales
Legislación Española completa sobre Prevención de Riesgos LaboralesLegislación Española completa sobre Prevención de Riesgos Laborales
Legislación Española completa sobre Prevención de Riesgos Laborales
 
Revista El Prevencionista 19ava Edición
Revista El Prevencionista 19ava EdiciónRevista El Prevencionista 19ava Edición
Revista El Prevencionista 19ava Edición
 
Esthetics in maxillofacial prosthesis/prosthodontic courses
Esthetics in maxillofacial prosthesis/prosthodontic coursesEsthetics in maxillofacial prosthesis/prosthodontic courses
Esthetics in maxillofacial prosthesis/prosthodontic courses
 
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLYARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
 
Digitalización de Autónomos y pymes en España 2016
Digitalización de Autónomos y pymes en España 2016Digitalización de Autónomos y pymes en España 2016
Digitalización de Autónomos y pymes en España 2016
 

Rodney Resume, Neu Flugwerk Mechaniker

  • 1. Rodney L. Hipsher Hipsherrodney@gmail.com 3727 Raccoon Valley Dr. Powell, 37849 Tn. (865) 765-6656 Skills  Experience with troubleshootingcomplex systems  Experience with readingblueprints  Experience with layingoutfixturelocations  Experience with usingscissorlifts,aerial lifts,forklifts,backhoes,and other heavy equipment  Experience with PVC pipe, screw pipe, copper pipe, and steel pipe, gluing,threading, soldering,brazing,and welding.  Experience with precision instruments,in-regards to,dial indicators, Vernier calipers,micrometers,torque wrenches, and feeler gauges  Experience with electrical and hydraulicschematics  Experience with soldering,de-solderingcomponents from circuitboards. EMPLOYMENT HISTORY Aircraft Technicians Inc. 11/15-Present Po Box 1026 Alcoa, Tennessee 37701 (865)740-6406 A+P Mechanic  Performed on-call maintenance.  Performed 3-day checks, Service checks, Routine checks, Airframe 500 Hour inspections, and APU 500Hour inspections on CRJ 200/700/900s.  Changed NLG and MLG tires as well as brakes on CRJ 200/700/900s.  Performed any necessary maintenance on CRJ 200/700/900s from the radome to the aft tail NAV light. Kalitta Air 06/15- 10/15 Oscoda, Michigan A+P Mechanic  Assist the team in the maintenance of large jet aircraft.  Able to follow instructions, and job duties that were left to be accomplished as a single member of the team.  Able to perform job tasks without supervision.  Aircraft worked on as follows: MD-80, B737, B747, B767  Removed, Re-installed, and adjusted outboard flap fairings on B767  Removed and replaced right windshield on MD80  Removed and replaced auxiliary waste tank on B737  Removed and replaced toilet on B767  Removed and replaced hydraulic fittings on B737
  • 2.  Removed and replaced hydraulic pump on B767  Sanitized potable water system on B767  Removed and replaced Emergency slide on MD80  Replaced O-ring seals on fuel/oil heat exchanger on JT-8 on a B737 Other duties as required Rodney L. Hipsher Hipsherrodney@gmail.com 3727 Raccoon Valley Dr. Powell, 37849 Tn. (865) 765-6656 (Continued) Shoffner Kalthoff Mechanical Electrical Service 05/06 - 08/13 3600 Papermill Dr, Knoxville, TN 37909 (865) 523-1129 MasterPlumber  Experience with reading blue prints  Experience with laying out fixture locations  Experience with using scissor lifts, aerial lifts, forklifts, backhoes, and other heavy equipment  Experience with PVC pipe, screw pipe, copper pipe, and steel pipe, gluing, threading, soldering, brazing, and welding. Other duties as required EDUCATION 04/15 Powerplant certificated by Federal Aviation Administration 10/13 – 04/15 Aviation maintenance Technology certificate of completion from Tennessee College of Applied Technology of Morristown 09/14 Airframe certificated by Federal Aviation Administration 04/08 - 05/11 PHCC Apprenticeship program 05/11 Journeyman Plumbing License 12/06 Diploma of completion from Halls High school