Acotec Partition walls- a revolutionary technology from Elematic Finland offers production of Non load bearing -Concrete partition walls that eliminate plastering / masonry work and increase carpet area. Big Benefits- Avoid cracks/ High strength walls /low water absorption / Competitive material cost/ Low capital investment (compact plant) giving high production

1. Site Installation of Acotec
Partition walls
Commercial and Residential project using Acotec
partition walls

2. Acotec-panel dimensions
Standard thicknesses
length
2500 – 3300
mm

3. Two men build about 50 m2
of ACOTEC-wall/workday,
i.e. small apartment´s
partition walls
ACOTEC
6 m2/h
BLOCK
3 m2/hBRICK
1 m2/h
Productivity

4. Commercial /Residential High rise towers
Acotec used in
external wall
application

5. External walls with window cut outs
Acotec used in
external wall
application

6. External Facade wall with Texture finish

7. Acotec Double wall of 184mm(two walls of
Acotec joined together using mortar glue)
Acotec used as
double wall

8. Double wall used in Bathroom walls holding a
100 mm PVC pipe in between the walls, the
other wall is in the bedroom

9. Electrical cut out and Junction box

10. Partition walls with embedded junction
box and conduits from the bottom
Conduit lines

11. Partition walls - installed

12. Partition walls – Finished with tiled floors

13. Partition walls – Finished with tiled floors
and door frame fit out

14. Skirting on Acotec wall with offset

15. Kitchen and completed room

16. Finished walls with putty and paint finish

17. Acotec Production plant pictures

18. Toilet pods with textured plaster using
Acotec walls

19. Boundary wall application -1.8mtr high 3 mtr
long and 92 mm thick panels with GI Columns

20. Acotec- Answer to all your problems using
Traditional Masonry/ AAC walls
Contact us to hear more!
www.elematic.com