Power-CEO(TM) is smart technology for real KW and KVA savings by using the "At Load" advantage!

1. Correcting “At Load” = Superior Energy Savings
DUNS: 967622361 CAGE: 6C0U6
The “At Load Advantage” + Smart Technology
= real possibilities for KW and KVA Power Savings!
POWER-CEO™ is a scalable smart technology providing new
opportunities for energy savings. Our advanced model puts
correction where the problem is, “At Load”, which benefits the
facility, not just the utility. Service entrance solutions rob the
facility of significant savings potential.
WER-CEOComputerized Energy Optimizer
P
TM

2. *Power-CEO™ has not been shown to amplify existing harmonics, harmonic packages have been sold to
deal with preexisting harmonics not caused by the Power-CEO™
DUNS: 967622361 CAGE: 6C0U6
WER-CEOComputerized Energy Optimizer
P
TM
From Energy Star:
“The only potential
for real power
savings would occur
if the product were
only put in the circuit
while a reactive load
(such as a motor)
were running, and
taken out of the
circuit when the
motor is not running.
This is impractical,
given that there are
several motors in a
typical home that
can come on at any
time (refrigerator, air
conditioner, HVAC
blower, vacuum
cleaner, etc.), but the
unit itself is intended
for permanent,
unattended
connection near the
house breaker
panel.”
obtains and exceeds
this standard.
WER-CEOComputerized Energy Optimizer
P
TM
Power-CEO™ is the solution for Power Engineers, Energy Auditors
and Facility Managers who want power factor correction done right!
With new possibilities for “At Load” and “Near Load” correction KW
and KVA savings can be achieved due to line loss between the
meter and the load. Benefits gained by this approach:
 Excess current reduction from thermal line loss creates savings in
billable watts at the meter. This lowers KW, KW Demand charges and
KW usage charges.
 Eliminates Power Factor Penalty.
 Increased ROI with target of 12 Months.
 Can be installed behind a service entrance unit. Power-CEO™ has
achieved an additional $8000 per month average savings by strategic
placement in a distribution center that already had a service entrance
unit.
 Reduced thermal degradation of structural electrical devices and
associated maintenance.
 Reduced levels of equipment damage by reduced harmonics.
 No equipment damage from amplified harmonics.
 Virtually eliminates the cost of harmonic packages associated with
power factor correction.
Service Entrance Unit Drawbacks:
 Only lower PF or VAR penalty.
 Will not benefit KW, KW demand, or KW usage charges.
 *Concentrated capacitance is generating a higher magnitude of
harmonics on the larger conductors resulting in increased purchase
cost of harmonic reducing packages.
Our Application Model:
 Static Units: Used for 100% duty cycle loads
 Semi Dynamic Units: Used for single loads that are less than 100%
duty cycle.
 Dynamic Units: Sub-Panel installation for multiple loads that have
less than 100% duty cycle.
Semi Dynamic and Dynamic units eliminate:
 Power consumption when the motor is off.
 Over capacitance/ over correction which is counterproductive.
 Discharging into the motor windings which may void warranties and
cause damage to equipment.
 Harmonic amplifications.

3. DUNS: 967622361 CAGE: 6C0U6
How our model works:
A s s h o w n i n t h e
example to the left we
have 3 different load
profiles:
Dynamic Units:
are placed at a sub-
panel for multiple
d o w n s t r e a m l o a d
correction.
Semi Dynamic Units:
are put “At Load” to
correct when the load
does not run at 100%
duty cycle.
Static Units:
are put “At Load” to
correct when the load
ONLY runs at 100%
duty cycle.
This is just one
application example.
POWER-CEO™ is
custom engineered for
strategic “At Load” or
“Near Load”
applications resulting
in maximum KW and
KVA savings.
WER-CEOComputerized Energy Optimizer
P
TM

4. What sets POWER-CEO™ apart from all other products currently on the market?
Power-CEO™ patented smart technology provides new levels of savings by independently and
dynamically adjusting each phase to almost perfect efficiency while consuming less power than a pen light!
DUNS: 967622361 CAGE: 6C0U6
816-533-7373
www.powerceosales.com
Benefits:
UL Approved
Green Technology: Less strain on the Power
Grid
=less demand for power generation.
=less pollution.
Compensates for voltage drops during peak
demand periods.
Substantial reduction of current.
Improvement in power quality.
Reduces total load current.
Correction will reduce the KVAH, usage, total
power, time of use sensitivity, and
increase the energy efficiency.
Reduction in distribution system
temperatures.
NO over-capacitance.
NO switching spikes.
NO reactor coils.
NO arcing.
NO maintenance.
NO leading PF.
NO winding heating.
NO creation or amplification of harmful
harmonics.
Lowers feeder stress.
Lowers transformer stress.
Facilities with utility charges benefit if they
have the following:
PF penalty
Line loss penalty
Peak KVA/KW demand charges
KVA or KVAH billing methods
Any other low efficiency related
penalty
Available Options:
Surge Protection
ENF-Electric Noise Filtration
EMF-Electromagnetic Field Reduction
WER-CEOComputerized Energy Optimizer
P
TM Power CEO™ Computerized Energy Optimizer is the
superior new standard for Dynamic Inductive Load
Control!
 Over 4000 different sized models available.
 Scalable from 110V to 600V in 50Hz or 60Hz.
 Single, Split Single, Two and Three Phase Applications.
 IE voltage application 110,110/190, 115, 120, 120/208, 127, 127/220, 190, 200,
215, 220, 230, 240, 240/415, 277, 330, & 347 Volts.
 System uses 5 milliwatts while monitoring up to a maximum of 100 milliwatts at
peak demand.
 Logically separates each phase/hotline in Split Single, Two, and Three phase
systems.
 Independently analyzes each phase/hotline in Split Single, Two, and Three phase
systems.
 Maintains a power factor of .98 or greater on all phases/hotlines independently
without delay.
 Aligns the phase angle by correcting the power factor of each phase within a
range .98 to .99 with precise increments of capacitance applied to each phase.
 Uses precise steps of capacitance to allow for the most accurate adjustments
every cycle, with adjustment steps as small as .03 kVAR available per
phase/hotline.
 Operates in parallel, not in series, which helps correct unbalanced loads.
 Computer smart chip technology onboard.
 Uses computerized triggering.
 Continually adjusts, often many times per minute.
 POWER-CEO™ always saves more power than it uses, in some cases a 35%
total energy reduction has been achieved.
 Does NOT:
Cause switching spikes.
Create over-capacitance.
Use reactor coils.
Create sparks.
Create harmonics.*
* Harmonics Package Available.
PowerCEO
L.L.C.