1. FOR DOOR THRESHOLD DETAIL
REFER TO DETAIL 5
(Drawing number 9000-009)
AIR LOCK
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(250mm thick)
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(250mm thick)
horizontal sliding door
c/o 5400high x 2300wide
to suit new freezer store
operating temperature
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(250mm thick)
250
240c/o2300mmwidth2607mm=c/owidth(2300mm)+307mm
5147
23001480
500
2170
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(100mm thick)
33501130
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(250mm thick)
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(75mm thick)
261112
REFER TO DETAIL 2
(Drawing number 9000-009)
NEW FORK LIFT
& DELIVERY DOCK
NEW FREEZER STORE
AREA
501549
wall panel
division
wall panel
0.8mm thick bent up pre-painted metal flashing
polystyrene fillet
50x50x2 aluminium angle (mill finish),
pop riveted to insulation panel
continuous silicone bead
continuous silicone bead
ether foam to joint
thermal break: metal skin to be
cut back 10mm
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(200mm thick)
15dv polystyrene insulated panel with
0.55mm thick metal skins on both sides
(200mm thick)
door c/o door c/o
WARM SIDE
COLD SIDE COLD SIDE
0.8mm thick bent up pre-painted metal flashing
polystyrene fillet
50x50x2 aluminium angle (mill finish),
pop riveted to insulation panel
continuous silicone bead
continuous silicone bead
ceiling panel ceiling panel
division
wall panel
continuous silicone bead
non-hardenning butyl mastic sealant
0.8mm thick bent up pre-painted metal flashing
M10 nut and bolt fixings to turnbuckle
M10 eye-to-eye turnbuckle
crosby clamp to suit 8mm thick steel wire rope
8mm steel wire rope fixing to
structural element
ceiling panel ceiling panel
100
M10 threaded rod fixings at 1172 centres
M10 hex nut
3mm m/s hot dipped galvanised
hanger bracket
continuous silicone bead
0.8mm thick bent up pre-painted metal flashing
fender washer
M10 hex nut
0.8mm thick bent up pre-painted metal flashing
polystyrene fillet
50x50x2 aluminium angle (mill finish),
pop riveted to insulation panel
continuous silicone bead
continuous silicone bead
ceiling panel
wall panel
65x38x1.6 aluminium angle (mill finish),
pop riveted to insulation panel
non-hardening butyl mastic sealant
ether foam to joint
continuous silicone bead
30
200
200
200
200
200
200
200 3600 internal 200 3600 internal 200
300 c/o 3000mm width 300 300 c/o 3000mm width 300
3800 3800
250 c/o 3000 250 250 c/o 3000 250
3500 = c/o width + 500mm 3500 = c/o width + 500mm
BLAST FREEZER 7 BLAST FREEZER 6
WARM SIDE
COLD SIDE
WARM SIDE
COLD SIDE
bollards
(as per specification)
bollards
(as per specification)
bollards
(as per specification)
RUDNEVRUDNEVa division of Southey Holdings Pty Ltd
31 Gillits Road - Westmead - Pinetown
P.O. Box 10634 - Ashwood
Tel.: (031) 709 0130/1/2
Fax.: (031) 709 2149
REG No.: 2012/204464/07
Design, manufacture and installation of insulated panels for
controlled environments - Cold rooms, Freezer rooms, Clean
rooms and Factory insulated structures.
Scale at A1:
AS SHOWN
Dm: Designed: Approved:
Checked: Tech Chk: Det Chk: Date:
TB ZMG
02/10/2015
Drawing Title:
INSULATION
INSTALLATION
DETAILS 02
LYNCA MEATS
Project Number: Drawing Number: Revision:
By
Chk
Date SuffixRevision Details:
JHB0307 9000-013 01
DETAIL 10
AIRLOCK DOOR DRAWBACK DETAIL
DETAIL 11
TYPICAL BLAST FREEZER DOOR DETAIL
DETAIL 12
BLAST FREEZER CEILING
CEILING TO WALL JOINT DETAIL
(WITHOUT STEP)
DETAIL 13
BLAST FREEZER CEILING
CEILING TO WALL JOINT DETAIL
(WITH STEP)
DETAIL 14
BLAST FREEZER CEILING
WALL TO WALL JOINT DETAIL
DETAIL 15
INTERMEDIATE
ROOF SUPPORT DETAIL