introduction to premixed flame,its classification,laminar premixed flame,laminar premixed flame, structured of 1D premixed flame , various zones of premixed flame.
2. What do you mean by flame?
A flame is a self-sustaining propagation of a localized
combustion zone at a subsonic velocities.
Classification of Flames:-
1.Premixed flames:
A)laminar premixed flame B)Turbulent premixed flame
example: Bunsen burner, LPG domestic burner, SI Engine
2.Non Premixed flames or diffusion flames
example: candle flame
INTRODUCTION
3. LAMINAR PREMIXED FLAMES
A Bunsen burner is a very good example of laminar
premixed flame.
FIG:BUNSEN BURNER
WORKING:
A jet of fuel at the base induces a flow
of air through the variable area port.
Air and fuel are mix as they flow up
through the tube.
Typically Bunsen burner consist
of duel flame,
1) Inner premixed flame
2) Outer diffusion flame
4. LAMINAR FLAME SPEED
It is defined as the apparent average velocity that the
unburned mixture will acquire ,if it were to pass through the conical
flame surface .
It is important for flame to remains
Stationary and flame shape.
From diag. laminar flame speed
given by,
6. FLAME ZONES
1.Preheat zone:
Negligibly small heat release
Certain chemical reactions take place in this zone.
2.Reaction zone:
most of the chemical energy is released in the form
of heat.
Decomposition of fuel takes place, leading to intermediate
radical formation.
Reaction zone is very thin as compared to the preheat
zone.
Temperature gradient and concentration gradient are high.
3.Recombination zone:
CO2 and H2O are formed;
No heat release in this zone
7. REFERANCES
1.Analytic Combustion by Professor Anil W. Date.
2.NPTEL lectures by Professor D.P. Mishra.
3.An Introduction to Combustion by Stephen R. Turns.