1. ®
MAGMA POLYMERS PVT LTD.
C-14, MIDC AMBAD, NASHIK – 422010
Ph: +91-0253-6601208/6601209 Fax: +91-0253-2385339
Email: magmapolymerspvtltd@gmail.com, admin@magmapolymers.in
Product: Metallised and coated polyester film-HT-11
Description: Normal density metallised bi-axially oriented polyester film and
metallised on corona surface to enhance the metal adhesion and other side coated
with HT-11 for Ink Adhesion.
Application: Suitable for Carton packaging application primarily for printing by UV off-set Inks.
The film is laminated on metallised with Board/paper and printed the other side by UV off-set.
Salient Features:
• Good adhesion of Print primer on polyester side
• Good Lamination Bond Strength
• Excellent machinability
. .High resolution printing by UV off-set process
Physical properties:
1 Nominal thickness: 12.8microns
2 Average yield : 55-57 sq meters/kg
3 Optical Density : 2.1 +- 5% (Jindal standard)
4 S. Tension, Dynes/cm: Metal side: 54, Film side 40 (ASTM D 2578)
5 Adhesion/Bond strength: Very good with tape test, cross hatch.
6 Coating Uniformity : Uniform ,no visible defects
7 Winding quality: Wrinkles ,Creases are absent, one or two pin holes in
1000 metres observed.
Joints, if any are flagged and mentioned in the packing slip.
8 Core ID: 6 inches , Metal side outside of the rolls
9 Packing: The rolls are wrapped in stretch wrap film, followed by Bubble
film and over wrapped in corrugated sheets edges and sides
Protected by bubble film. The rolls are left to stand on
plywood fitments and core plugs are strapped for protection
in transit.