technical specifications of our Stylam make High pressure Laminates

1. High Pressure Laminates-STYLAM EXTERIOR CLADDING ---- TECHNICAL SPECIFICATIONS
SL.NO PROPERTIES TEST METHOD ATTRIBUTES OF PERFORMANCE UNITS RESULTS(AS PER EN 438-6)
EN-438 LAMINATE CLASSIFICATION EGS/EDS/EGF/EDF
1 DIMENTIONAL PROPERTIES
1.1 Thicknes EN 438-2.5 Thickness tolerance mm 5 < T < 8 : +_ 0 ,4
1.2 Size EN 438-2.6 Length and Width mm .+10/-0
1.3 Straightness of edges EN 438-2.7 Streightness of edges mm/m <.1.5
1.4 Squareness EN438-2.8 Squareness mm/m <1.5
1.5 Flatness EN438-2.9 Flatness (measured on full-size sheet) mm/m 2.0< T < 6, 0 : 8
2 PHYSICAL PROPERTIES
2.1 Flexural Modulus EN ISO 1.78 Stress Mpa > 9000
2.2 Flexural strengthg EN ISO 1.78 Stress Mpa > 80
2.3 Tensile strength EN ISO 527-2 Stress Mpa > 60
gm/cm3
2.4 Density EN ISO 1183 Density >1.35
Resistance to impact with Indent. Dia. 10 mm 2 < T<6 mm Drop
2.5 EN 438-2.21 min. >1400
large Height
Indent. Dia. 10 mm T >6 mm Drop
Diameter ball min. >1800
Height
Resistance to wet
2.6 EN 438-2.15 Mass increase -2< T < 5mm max.% EGS/EDS- <7, EGS/EDF- <10
Conditions
Mass increase - T > 5mm max.% EGS/EDS- <5, EGF/EDF- <8
A10,Bldg 5,Akshay Mittal; Estate,Andheri East,Mumbai 59 T:+9122 4046 3100 E: info@leadsfacade.com W:- http://leadsfacade.com

2. Resistance to wet
2.6 EN 438-2.15 Appearance Rating >4
Conditions
Dimensional stability at Cumulative dimensional change -
2.7 EN438-2.17 Longitudinal % < 0.40
elevated temperature 2<T<5mm
Transversal % < 0.80
Cumulative dimensional change
Longitudinal % < 0.30
T>5mm
Transversal % < 0.60
3 WEATHER RESISTANCE REQUIREMENTS
Resistance to Climatic
3.1 EN 438-2.19 Thermal Shock Resistance-Appearance Rating >4
Shock
Resistance to Artificial
3.2 EN 438-2.29 contrast Grey scale rating >3
Weathering
The below are the Quality certificates we have for our range of High Pressure Laminates
A10,Bldg 5,Akshay Mittal; Estate,Andheri East,Mumbai 59 T:+9122 4046 3100 E: info@leadsfacade.com W:- http://leadsfacade.com