Effortless Driving Experience Premier Mercedes Sprinter Suspension Service
Info Mipa A40
1. Mipa A 40 gb 5/0509
1K-Acrylspachtel page 1 / 1
Product Information
Mipa A 40 1K-Acrylspachtel is an acrylic based fast drying finishing filler, for the
levelling of minor irregularities, scratches and pores on primer / filler surfaces as well
as on glas fibre reinforced plastic or old sanded coatings. To be applied in thin layers.
Re-coatable with all of the usual paint systems.
Colour shade beige
Mixing ratio
Hardener
Thinners
Spraying viscosity 20° C
Application spraying pressure spraying nozzle spraying operations
Spray gun - Air /Flowjar
Airless / Airmix
Pot life
Coat thickness / dry film thin coats; when necessary, repeat more times the operation
Curing time / Flash off time approx. 15 min.
Dry recoat time dust dry set to touch full hardness
Object temp. 20° C 20 - 30 min.
Object temp. 60° C
VOC-regulation EC limiting value for the product (cat. B/e): 840 g/l (2007)
This product contains max. 356 g/l VOC [ 2,97 lbs/gal]
Remarks:
Processing conditions: from + 10° C and up to 80% r elative air humidity.
Not to be used on blank sheet metal. Old coatings must be cleaned thoroughly and sanded.
Dry sandable after approx. 20 - 30 min. (P 180 - 240) or wet (P 240 - 400).
All products should be disposed of in relation to the regulations of the environmental health
authorities. Protect your Environment!
This data sheet is for information purpose only! To our knowledge the data provided complies with the latest standard and is
based on years of experience in the manufacture of our products. However the data is not binding and without warranty. Please
follow recommendations stated on the relevant safety data sheet and precautions stated on the product label. We reserve our right
to make additions, deletions, or modifications to the information at any time without prior notification.
MIPA AG · D-84051 Essenbach · Tel. 08703/9220 · Telefax 08703/922100
![Mipa A 40 gb 5/0509
1K-Acrylspachtel page 1 / 1
Product Information
Mipa A 40 1K-Acrylspachtel is an acrylic based fast drying finishing filler, for the
levelling of minor irregularities, scratches and pores on primer / filler surfaces as well
as on glas fibre reinforced plastic or old sanded coatings. To be applied in thin layers.
Re-coatable with all of the usual paint systems.
Colour shade beige
Mixing ratio
Hardener
Thinners
Spraying viscosity 20° C
Application spraying pressure spraying nozzle spraying operations
Spray gun - Air /Flowjar
Airless / Airmix
Pot life
Coat thickness / dry film thin coats; when necessary, repeat more times the operation
Curing time / Flash off time approx. 15 min.
Dry recoat time dust dry set to touch full hardness
Object temp. 20° C 20 - 30 min.
Object temp. 60° C
VOC-regulation EC limiting value for the product (cat. B/e): 840 g/l (2007)
This product contains max. 356 g/l VOC [ 2,97 lbs/gal]
Remarks:
Processing conditions: from + 10° C and up to 80% r elative air humidity.
Not to be used on blank sheet metal. Old coatings must be cleaned thoroughly and sanded.
Dry sandable after approx. 20 - 30 min. (P 180 - 240) or wet (P 240 - 400).
All products should be disposed of in relation to the regulations of the environmental health
authorities. Protect your Environment!
This data sheet is for information purpose only! To our knowledge the data provided complies with the latest standard and is
based on years of experience in the manufacture of our products. However the data is not binding and without warranty. Please
follow recommendations stated on the relevant safety data sheet and precautions stated on the product label. We reserve our right
to make additions, deletions, or modifications to the information at any time without prior notification.
MIPA AG · D-84051 Essenbach · Tel. 08703/9220 · Telefax 08703/922100](https://image.slidesharecdn.com/infoa40-111117094157-phpapp02/85/Info-Mipa-A40-1-320.jpg)
