3. Introduction
A Leader in Biotechnology …
Lifecore Biomedical is dedicated to the development of technologically
advanced, dependable products that offer long-term compatibility with the
human body. Thousands of patients worldwide have benefited from Lifecore’s
technology in dentistry, general surgery and ophthalmology. Founded in 1965,
Lifecore is a publicly held company (Nasdaq: LCBM) headquartered in Chaska,
Minnesota, USA.
Lifecore’s Oral Restorative Division is focused on providing the highest quality
surgical devices and applications for the global dental industry. The Division
offers one of the most extensive product lines to address the many clinical
situations faced by our clients. Lifecore offers two-stage internal and external
hex implant systems and a single stage implant system. A complete family of
restorative options are available to meet the unique needs of each patient. Visit
us at www.lifecore.com to learn more.
Our Commitment to Quality …
Lifecore’s commitment to quality and service ensures that our products meet
or exceed the highest standards set by the United States Food and Drug
Administration, the European Community and other international agencies.
Lifecore has earned ISO 9001 and CE Certifications, international symbols of
quality system assurance and compliance.
Lifecore has earned a reputation for quality by
enforcing strict design and inspection criteria. Our 100%
inspection of all critical dimensions of dental implants
and prosthetic components has allowed Lifecore to
maintain the tightest tolerances in the industry. In
addition, Lifecore’s Lifetime Limited Warranty gives
the clinician the added security of knowing that dental
implants and prosthetics are covered throughout the
patient’s lifetime.
Our Commitment to Your Practice …
Lifecore’s technical services department is available to consult with clients
on questions related to case planning, component selection and step-by-step
procedures for clinical and laboratory applications.
Our family of Support Plus® Restorative Training Programs are recognized in the
industry as the best referral based training courses available. Lifecore is certified
through the Academy of General Dentistry, the American Dental Association and
through the National Board of Certification to offer continuing education credits.
Lifecore is committed to being the standard of comparison for product quality,
education and customer service, and to be recognized as a company of
dedication, honesty and integrity.
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -3-
4. RENOVA Implant System
Internal hex prosthetic connection for
superior esthetics and reliability
1mm machined titanium collar for
soft tissue maintenance
Parallel walled neck region with
circumferential grooves for crestal seal
and bone interlock
Lifecore’s proven RBM Surface
Straight and tapered designs expand
treatment options
Tapered design enables placement near
impinging anatomical structures while
STRAIGHT
maximizing prosthetic table diameter for
TAPERED
natural emergence profile
Apical end design provides excellent
initial thread engagement and stability
-4- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
5. Internal Hex Prosthetic Connection Proven RBM Surface
Delivers superior strength and ease Lifecore’s RENOVA, RESTORE® and STAGE-1™
of prosthetic indexability. implants feature the RBM surface. Lifecore’s
RBM, a roughened titanium surface, has
Beveled interface helps maximize been in clinical use since 1997 and has
prosthetic stability and evenly achieved a high level of clinical acceptance.
transfers occlusal forces to the
implant. Lifecore’s RBM (Resorbable Blast Media)
2000X RBM Surface
substantially increases bone-to-implant
contact and mechanical bone interlock, with
Deep internal hex connection
approximately 250% more surface
simplifies abutment seating and
roughness than a machined titanium
provides excellent tactile feel for
surface. Safety and biological compatibility
added confidence.
are ensured through the exclusive use of
biocompatible calcium phosphate ceramic
RENOVA Prosthetics media in the roughening process.
500X RBM Surface
The Tapered and Straight implant
designs share the same prosthetics. As a clinician, you can have confidence in the Lifecore implant
you choose knowing that Lifecore is an established leader in RBM
surface technology. Our three implant designs, coupled with our
The RENOVA system offers
RBM surface technology, maximize your opportunity for clinical
abutment systems for:
flexibility and optimal treatment outcomes.
• Cement-Retained restorations
• Screw-Retained restorations Mechanical interlock of bone into the
implant surface topography is evident.
• Overdenture restorations A direct bone-to-implant interface is
observed at 100x magnification.1
References:
1. Sanz A, et al. Experimental study of bone
response to a new surface treatment of
endosseous titanium implants. Implant
Dentistry. 2001; 10:126-131.
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -5-
6. Drill Sequence RENOVA Tapered Implants
SDI 3.75mm RENOVA Tapered Implant
1 2 3 4 5 6
2.3mm Round Bur 2.0mm Initial Drill 3.75mm Intermediate Drill 3.75mm Finishing Drill 3.75mm Tap 3.75 x 13mm Implant
RDI 4.5mm RENOVA Tapered Implant
1 2 3 4 5 6
2.3mm Round Bur 2.0mm Initial Drill 4.5mm Intermediate Drill 4.5mm Finishing Drill 4.5mm Tap 4.5 x 13mm Implant
Depth Marking System (for Tapered Implants)
13mm
NOTE: Drill stops and bands reference
the insertion depth for the corresponding
implant length.
0mm
≤0.36mm
Initial Intermediate Finishing Tap
Drill Drill Drill
-6- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
7. Drill Sequence Charts
Drill Sequence RENOVA Straight Implants
SDI 3.75mm RENOVA Straight Implant
1 2 3 4 5 6 7 8 9
2.3mm 2.0mm 2.35mm 2.35mm 2.8mm Drill 3.25mm Drill 3.75mm 3.75mm Tap 3.75 x 13mm
Round Bur Initial Drill Drill Depth Gauge Countersink Drill Implant
RDI 4.75mm RENOVA Straight Implant
1 2 3 4 5 6 7 8 9 10 11
2.3mm 2.0mm 2.35mm 2.35mm 2.8mm 3.25mm 3.25/4.25mm 4.25mm 4.75mm 4.75mm 4.75 x 13mm
Round Bur Initial Drill Drill Depth Gauge Drill Drill Pilot Drill Drill Countersink Drill Tap Implant
Depth Marking System (for Straight Implants)
16mm
13mm
11.5mm
NOTE: Drill bands reference the insertion depth
10mm for the corresponding implant length and do not
8mm indicate actual millimeter drill length.
0mm
≤1.14mm
3.25x16mm 3.25x11.5mm
Drill Drill
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -7-
8. RENOVA Implants
Lifecore RENOVA Tapered Implants
Features:
● Tapered implant design.
● Lifecore RBM Surface.
● Cover Screw and pre-mounted, color-coded Placement Head (3.5mm) included
with each implant.
● Packaged to minimize handling during placement.
● Gamma Sterilized.
Instrumentation Required:
● RENOVA Tapered Implant Surgical Kit
● .048" Hex Driver for Placement Head and Cover Screw
SDI 3.75mm RBM Tapered Implant
Description Catalog No. 3.75mm
3.75 x 10mm 14000
3.75 x 11.5mm 14001
3.75 x 13mm 14002
length
3.75 x 14.5mm 14003
2.8mm
Apical
Diameter
RDI 4.5mm RBM Tapered Implant
Description Catalog No. 4.5mm
4.5 x 8.5mm 14004
4.5 x 10mm 14005
4.5 x 11.5mm 14006
4.5 x 13mm 14007 length
3.0mm
Apical
Diameter
-8- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
9. Lifecore RENOVA Straight Implants
Features:
● Straight (parallel walled) implant design.
● Lifecore RBM Surface.
Cover Screw and pre-mounted, color-coded Placement Head (3.5mm) included
Healing Abutments
●
with each implant.
Implants &
● Packaged to minimize handling during placement.
● Gamma Sterilized.
Instrumentation Required:
❍ RENOVA Straight Implant Surgical Kit
❍ .048" Hex Driver for Placement Head and Cover Screw
SDI 3.75mm RBM Straight Implant
Description Catalog No. 3.75mm
3.75 x 8mm 13000
3.75 x 10mm 13001
3.75 x 11.5mm 13002
3.75 x 13mm 13003 length
3.75 x 16mm 13004
RDI 4.75mm RBM Straight Implant
Description Catalog No. 4.75mm
4.75 x 8mm 13005
4.75 x 10mm 13006
4.75 x 11.5mm 13007
4.75 x 13mm 13008 length
4.75 x 16mm 13009
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -9-
10. Cover Screws & Healing Abutments
Cover Screws
Features:
● Included with all RENOVA implants.
● Offered separately for spare or replacement use.
Instrumentation Required:
❍ .048" Hex Driver
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Cover Screw 10032 10033
Healing Abutments
Features:
● Healing Abutments are designed to achieve optimal contouring of soft tissue,
which provides for more aesthetic restorations.
● Occlusal surface is labeled with the implant prosthetic table (SDI and RDI)
and cuff height.
Instrumentation Required:
❍ .048" Hex Driver
SDI 3.75mm Healing Abutment
Cuff Height Catalog No.
1.5mm 10035
3mm 10036
5mm 10037
RDI 4.5/4.75mm Healing Abutment
Cuff Height Catalog No.
1.5mm 10038
3mm 10039
5mm 10040
-10- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
11. Cement-Retained Restorations
Cement-On Crown (COC) Technical Considerations:
❍ A minimum inter-occlusal clearance of 4.0mm plus
Abutment System the additional height of the restoration is required
between the implant prosthetic table and the
Features: occlusal plane.
● Cement-on Crown (COC) Abutments are intended ❍ It is recommended that bulk abutment reduction be
for cement-retained restorations where conventional performed outside of the mouth due to risk of heat
crown and bridge techniques are desired. The COC transfer to the implant.
Abutment can be used for single or multi-unit (splinted) ❍ COC Abutments are made of titanium and are not
restorations. designed for direct casting to the abutment.
● COC Abutments can be prepared as needed and
impressioned directly using conventional crown Instrumentation Required:
and bridge techniques, eliminating the need for ❍ .048" Hex Driver
an impression post, analog and other prosthetic
components. These abutments may also be used
for provisional (temporary) restorations.
Torque Recommendation:
❍ 30 Ncm for Abutment Screw
Prosthetics
Laboratory
.048” Hex Driver
15° Angled Straight Locking
COC Abutment COC Abutment
Implant
Analog
Implant
Impression
Prosthetic
15° Angled Straight Locking
COC Abutment COC Abutment Post (Hexed)
Abutment Implant
Impressioned Directly Impressioned Directly
Healing Abutment
Surgery
Tapered Implant Straight Implant
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -11-
12. Cement-Retained Restorations
Straight Locking Cement-On Crown (COC) Abutments
● For use in single or multi-unit (splinted) restorations.
● Abutment margin can be prepared as necessary to follow gingival contours.
● COC Abutment may be impressioned directly using conventional crown
and bridge impression techniques. Alternately, a locking implant
impression post can be used to impression the Implant; allowing the
laboratory to prepare the abutment and fabricate the restoration.
● Abutments include .048” hex titanium abutment screw. Additional screws
are available separately.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
COC Abutment
with Screw 43089 43090
Abutment Screw, Ti 43092 43092
Angled Locking Cement-On Crown (COC) Abutments
● For use in single or multi-unit (splinted) restorations where angle
correction is needed.
● Pre-machined margins simplify abutment preparation and may be
additionally prepared to follow gingival contours.
● COC Abutment may be impressioned directly using conventional crown
and bridge impression techniques. Alternately, a locking implant
impression post can be used to impression the implant; allowing the
laboratory to prepare the abutment and fabricate the restoration.
● Abutments include .048” hex titanium abutment screw. Additional screws
are available separately.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
15°, 2mm Cuff 43094 43096
Abutment Screw, Ti 43100 43100
-12- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
13. Implant Impression Posts (UCLA type)
● Used for single or multi-unit (splinted) restorations.
● Unique 3-piece design includes a long screw (open tray impressions) and
a short screw (closed tray impressions).
● Transfers soft-tissue contours to the dental laboratory.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant
Impression Post 43127 43128
Implant Analogs
● Replicates the implant for use in the dental laboratory model.
Prosthetics
● Stainless steel design allows use during soldering procedures.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant Analog 43129 43130
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -13-
14. Screw-Retained Restorations
UCLA Abutment System Technical Considerations:
❍ A minimum inter-occlusal clearance of 4.0mm
Features: for the SDI and RDI UCLA Abutments is required
● The UCLA Abutment System can be used for single or between the implant prosthetic table and the top
multi-unit (splinted) crown and bridge restorations. It of the abutment screw when seated.
can also be used for bar attachment retained
overdenture restorations. Instrumentation Required:
❍ .048” Hex Driver
● UCLA Abutments are used to fabricate highly
aesthetic custom restorations that attach directly Torque Recommendation:
to the implant. ❍ 30 Ncm for Abutment Screws
.048” Hex Driver
Laboratory
UCLA Gold/Plastic UCLA UCLA UCLA
Sleeve (Locking) Temporary Temporary Gold/Plastic
Sleeve Sleeve Sleeve
(Locking) (Non- (Non-Locking)
Locking)
Implant
Analog
Prosthetic
Implant Implant
Impression Post Impression Post
Single Unit Multi-Unit (Splinted)
Restorations Restorations
Healing Abutment
Surgery
Tapered Implant Straight Implant
-14- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
15. UCLA Gold/Plastic Combo Sleeve
● The Gold/Plastic Combo combines the precision fit of a machined
interface with the convenience of a castable plastic chimney.
● Specially designed geometry on the plastic chimney improves wax retention.
● Offered in both locking and non-locking versions.
● Includes a titanium .048” hex abutment screw.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Locking 43006 43007
Non-Locking 43009 43010
Prosthetics
Abutment Screws for ● Titanium screw included with each abutment and offered separately.
UCLA Abutments ● .048” hex.
● Torque recommendation – 30Ncm.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Abutment Screw, Ti 43116 43116
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -15-
16. Implant Impression Posts (UCLA type)
● Used for single or multi-unit (splinted) restorations.
● Unique 3-piece design includes a .048” hex long screw (open tray
impressions) and a short screw (closed tray impressions).
● Transfers soft-tissue contours to the dental laboratory.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant
Impression Post 43127 43128
Implant Analogs
● Replicates the implant for use in the dental laboratory model.
● Stainless steel design allows use during soldering procedures.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant Analog 43129 43130
UCLA Temporary Sleeve
● Titanium Temporary Sleeves provide a textured surface for acrylic when
constructing provisional restorations.
● Available in non-hexed for multi-unit (splinted) restorations and hexed for
single tooth restorations.
● Includes a titanium .048" hex abutment screw.
SDI 3.75mm* RDI 4.5/4.75mm*
Description Catalog No. Catalog No.
Sleeve, Hexed 43110 43111
Sleeve, Non-Hexed 43113 43114
*Call for availability
-16- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
17. Screw-Retained Restorations
Fixed Detachable Abutment System
Features:
● The Fixed Detachable Abutment System is designed for ❍ A minimum inter-occlusal clearance of 6.9mm is
multi-unit (splinted) crown and bridge restorations. required between the implant prosthetic table and the
● It is also commonly used for bar attachment retained top of the coping screw when seated.
overdenture restorations. ❍ The tapered 12° side wall allows up to 24° of
● The Fixed Detachable Abutment provides excellent divergence between adjacent abutments.
stability and allows for easier path of insertion due
to its tapered design. Instrumentation Required:
❍ .062” Hex Driver
Technical Considerations:
Prosthetics
.048"
Hex Driver
Laboratory
Coping Screw
(.048" Hex)
Fixed
Waxing Fixed Detachable
Pin Detachable Plastic Sleeve
Gold Sleeve
Fixed Detachable
Abutment Analog
Prosthetic
1-Piece
Impression
Post
2-Piece Multi-Unit (Splinted)
.048" Impression Post
Hex Driver Restorations
Healing Fixed .062" Hex
Cap Detachable Driver
Abutment
AC Healing
Abutment
Surgery
Regular Diameter (RD)
components shown
Components not shown to scale.
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -17-
18. Screw-Retained Restorations
Fixed Detachable Abutments
● Torque recommendation – 30Ncm.
Instrumentation required:
cuff ● .062" Hex Driver.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
2mm Cuff, .062" Hex 43118 43120
4mm Cuff, .062" Hex 43119 43121
Healing Cap for Fixed Detachable Abutments
● Protects the abutment's internal threads and seating surface
during healing.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No Catalog No.
Healing Cap, .048" Hex R2800-00 R2800-00
Impression Posts for Fixed Detachable Abutments
● 1-piece design is used for closed tray impressions.
● 2-piece design is used for open tray impressions.
Impression Post, 1-Piece
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
1-Piece, 9mm, .048" Hex R9615-48 R9615-48
2-Piece, 9mm, .048" Hex R9515-48 R9515-48
Impression Post, 2-Piece
-18- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
19. Analog for Fixed Detachable Abutments
● Replicates the Fixed Detachable Abutment for use by the
dental laboratory.
● Stainless steel design allows use during laboratory
soldering procedures.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Fixed Detachable Analog 410530-4 410530-4
Gold Sleeve and Plastic Sleeve for Fixed Detachable Abutments
● Gold Sleeve provides a precision machined interface
between the restoration and the abutment. A Waxing Pin
Prosthetics
is available for waxing additional vertical height.
● Plastic Sleeve provides an economical alternative to Gold
Cylinders and the extended chimney eliminates the need
for a Waxing Pin.
Gold Sleeve Plastic Sleeve ● Use with titanium coping screws, which are
purchased separately.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Gold Sleeve 410720-4 410720-4
Plastic Sleeve, 12mm 410450-4L 410450-4L
Waxing Pin R9229-48 R9229-48
Coping Screw for Fixed Detachable Abutments
● Use with Fixed Detachable Abutment Gold and
Plastic Sleeves.
● Torque recommendation - 20Ncm.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
.048" Hex (1.5mm head) R9490-48 R9460-48
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -19-
20. Overdenture Restorations
Snap Abutment System
Features:
● The Snap Abutment System is used with two or more implants for implant attachment retained
overdenture restorations.
● The Snap Abutment threads directly into the implant.
● The Snap Abutment assembly is processed into the denture base either chairside or at the dental laboratory.
● Replacement retention inserts are available in a choice of 8, 10 and 12 Newtons.
Technical Considerations:
❍ A minimum inter-occlusal clearance of 7.0mm plus the cuff height is required.
❍ Implants must be relatively parallel to one another – less than 20º total divergence.
Snap Abutment Assembly
Overdenture Snap
Abutment Driver
Laboratory
Abutment
Implant
Analog
Snap Abutment Assembly
Implant
Prosthetic
Impression Post
Snap Abutment
Abutment Analog
Overdenture .048” Hex Driver
Abutment Driver
Abutment Implant
Impressioned Directly Impressioned Directly
Healing Abutment
Surgery
Tapered Implant Straight Implant
-20- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
21. Snap Abutments ● Snap Abutments are packaged with a Snap Abutment Assembly
[8 Newtons (N) – yellow] and laboratory spacer.
● Torque Recommendation – 30Ncm.
Snap Abutment
Assembly
Instrumentation Required:
❍ Overdenture Abutment Driver
cuff
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Snap Abutment 1mm Cuff 43102 43106
2mm Cuff 43103 43107
3mm Cuff 43104 43108
4mm Cuff 43105 43109
Snap Abutment Accessories
Snap Abutment
Assembly
8N Description Catalog No.
Retaining Retention Abutment Analog L2804-01
Ring Insert
Snap Retention Inserts, 8N,
10 N
Qty 6 (includes blue retaining rings) L2806-08
Snap Retention Inserts, 10N,
Retaining Retention Qty. 6 (includes blue retaining rings) L2806-10
Instrumentation & Motor
Ring Insert
Snap Retention Inserts, 12N,
12 N Qty. 6 (includes blue retaining rings) L2806-12
Retaining Retention Snap Retention Inserts, Multi-Pack,
Ring Insert Qty. 6 (includes blue retaining rings) L2806-13
Assembly (8N) with lab spacer L2807-01
Seating Tool L2808-01
Abutment Seating
Analog Tool
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -21-
22. Implant Impression Posts (UCLA type)
● Used for single or multi-unit (splinted) restorations.
● Unique 3-piece design includes a .048" hex long screw (open tray
impressions) and a short screw (closed tray impressions).
● Transfers soft-tissue contours to the dental laboratory.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant
Impression Post 43127 43128
Implant Analogs
● Replicates the implant for use in the dental laboratory model.
● Stainless steel design allows use during soldering procedures.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Implant Analog 43129 43130
-22- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
23. Surgical Kit for RENOVA Tapered Implants
The RENOVA Tapered Implant Surgical Kit
contains the instrumentation needed to place
RENOVA 3.75 and 4.5mm tapered implants.
Kit Features:
● Simple step-by-step drill sequences.
● RENOVA instrumentation offers improved efficiency,
longevity and overall ease of use.
● Includes drills and taps for use with external irrigation.
Description Catalog No.
Surgical Kit for Tapered Implants 14012
Surgical Kit Item List:
2.3mm Round Marking Bur 3.75 x 11.5mm Surgical Tap .048" Hex Swivel Head Driver, Long
2.0mm Initial Drill 3.75 x 13mm Surgical Tap .048" Hex Driver, Latch-Type, Short
3.75 x 10mm Intermediate Drill 3.75 x 14.5mm Surgical Tap Conversion Handle for
3.75 x 11.5mm Intermediate Drill 4.5 x 8.5mm Surgical Tap Latch-Type Instruments
3.75 x 13mm Intermediate Drill 4.5 x 10mm Surgical Tap Ratchet Extender, Short & Long
Placement Head Assembly Sleeves,
3.75 x 14.5mm Intermediate Drill 4.5 x 11.5mm Surgical Tap
SDI & RDI
3.75 x 10mm Finishing Drill 4.5 x 13mm Surgical Tap
Component Pack
3.75 x 11.5mm Finishing Drill SDI 3.5mm NP Placement Head
Instrumentation & Motor
Grommet Plugs, 2 Packs of 10
3.75 x 13mm Finishing Drill SDI 5.5mm NP Placement Head
Cleaning Detergent
3.75 x 14.5mm Finishing Drill RDI 3.5mm NP Placement Head
4.5 x 8.5mm Intermediate Drill RDI 5.5mm NP Placement Head
4.5 x 10mm Intermediate Drill SDI 15mm NP Placement Head*
4.5 x 11.5mm Intermediate Drill RDI 15mm NP Placement Head*
4.5 x 13mm Intermediate Drill Locking Drill Extender
4.5 x 8.5mm Finishing Drill Surgical Ratchet
4.5 x 10mm Finishing Drill Stabilizing Wrench
4.5 x 11.5mm Finishing Drill Hand Adapter
4.5 x 13mm Finishing Drill Ratchet Adapter, 8mm
3.75mm Countersink Drill, Tapered Ratchet/Tap Adapter, 12mm
4.5mm Countersink Drill, Tapered Handpiece Adapter
3.75 x 10mm Surgical Tap .048" Hex Swivel Head Driver, Short
* Call for availability
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -23-
24. Surgical Instrumentation for
RENOVA Tapered Implants
For recommended drill sequences and details on drill depth markings, refer to page 6.
Round Bur & Initial Drill
● Round Bur is used for marking the implant site prior to beginning the
drilling sequence.
● Initial Drill is the first drill used for all RENOVA Tapered Implants.
Description Catalog No.
Round Bur
Round Marking Bur, 2.3mm L1405-23-00
2.0mm Initial Drill 14071
Initial Drill
Drills for RENOVA Tapered
● Specific drill is used for each implant size.
● For use with external irrigation.
SDI 3.75mm Tapered Intermediate Drills SDI 3.75mm Tapered Finishing Drills
Description Catalog No. Description Catalog No.
3.75 x 10mm 14072 3.75 x 10mm 14076
3.75 x 11.5mm 14073 3.75 x 11.5mm 14077
3.75 x 13mm 14074 3.75 x 13mm 14078
3.75 x 14.5mm 14075 3.75 x 14.5mm 14079
RDI 4.5mm Tapered Intermediate Drills RDI 4.5mm Tapered Finishing Drills
Description Catalog No. Description Catalog No.
4.5 x 8.5mm 14080 4.5 x 8.5mm 14084
4.5 x 10mm 14081 4.5 x 10mm 14085
4.5 x 11.5mm 14082 4.5 x 11.5mm 14086
4.5 x 13mm 14083 4.5 x 13mm 14087
-24- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
25. Surgical Taps for RENOVA Tapered Implants
● For pre-tapping bone prior to tapered implant placement.
● Latch-type tap can be used in a handpiece or can be operated manually
when used with the Surgical Ratchet (L1702-01) and Ratchet/Tap
Adapter (L1806-05).
SDI 3.75mm Tapered Surgical Tap
Description Catalog No.
3.75 x 10mm 14088
3.75 x 11.5mm 14089
3.75 x 13mm 14090
3.75 x 14.5mm 14091
Instrumentation & Motor
RDI 4.5mm Tapered Surgical Tap
Description Catalog No.
4.5 x 8.5mm 14092
4.5 x 10mm 14093
4.5 x 11.5mm 14094
4.5 x 13mm 14095
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -25-
26. Surgical Kit for RENOVA Straight Implants
The RENOVA Straight (parallel walled) Implant Surgical Kit
contains the instrumentation needed to place RENOVA 3.75
and 4.75mm straight implants.
Kit Features:
● Simple step-by-step drill sequences.
● RENOVA instrumentation offers improved efficiency,
longevity and overall ease of use.
● Includes drills and taps for use with external irrigation.
Description Catalog No.
Surgical Kit for Straight Implants 13010
Surgical Kit Includes:
2.3mm Round Marking Bur 2.35mm Depth Gauge Conversion Handle for Latch-Type
2.0mm Initial Drill SDI 3.5mm NP Placement Head Instruments
2.35 x 11.5mm Drill SDI 5.5mm NP Placement Head Ratchet Extender, Short & Long
Placement Head Assembly Sleeves,
2.35 x 16mm Drill RDI 3.5mm NP Placement Head
SDI & RDI
2.8 x 11.5mm Drill RDI 5.5mm NP Placement Head
Component Pack
2.8 x 16mm Drill SDI 15mm NP Placement Head*
Grommet Plugs, 2 Packs of 10
3.25 x 11.5mm Drill RDI 15mm NP Placement Head*
Cleaning Detergent
3.25 x 16mm Drill Locking Drill Extender
3.25/4.25mm Pilot Drill Surgical Ratchet
4.25 x 11.5mm Drill Stabilizing Wrench
4.25 x 16mm Drill Hand Adapter
3.75mm Countersink Drill Ratchet Adapter, 8mm
4.75mm Countersink Drill Ratchet/Tap Adapter, 12mm
3.75 x 11.5mm Surgical Tap Handpiece Adapter
3.75 x 16mm Surgical Tap .048" Hex Swivel Head Driver, Short
4.75 x 11.5mm Surgical Tap .048" Hex Swivel Head Driver, Long
4.75 x 16mm Surgical Tap .048" Hex Driver, Latch-Type, Short
* Call for availability
-26- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
27. Surgical Instrumentation for RENOVA Straight Implants
For recommended drill sequences and details on drill depth markings, refer to page 7.
Round Bur & Initial Drill
● Round Bur is used for marking the implant site prior to beginning the
drilling sequence.
● Initial Drill is the first drill used for all RENOVA Straight Implants.
Description Catalog No.
Round Marking Bur, 2.3mm L1405-23-00
Round Bur Initial Drill 2.0mm Initial Drill 14071
Drills for RENOVA Straight Implants
Initial Drills ●
●
For use with external irrigation.
Offered in 2 lengths.
Short – for RENOVA straight implants up to 11.5mm
Long – for RENOVA straight implants up to 16mm
Description Catalog No.
2.35 x 11.5mm Drill 13031
2.35 x 16mm Drill 13032
Intermediate & Finishing Drills
Instrumentation & Motor
Description Catalog No.
2.8 x 11.5mm Drill 13033
2.8 x 16mm Drill 13034
3.25 x 11.5mm Drill 13035
3.25 x 16mm Drill 13036
4.25 x 11.5mm Drill 13038
4.25 x 16mm Drill 13039
Pilot Drill ● Pilot Drill helps ensure a smooth and accurate transition between the
3.25mm and 4.25mm drills.
● For use with external irrigation.
Description Catalog No.
3.25/4.25 Pilot Drill 13037
Countersink Drills ● Contours ridge prior to placing 3.75mm and 4.75mm RENOVA Straight
Implants, allowing implant and cover screw placement at or below the
surrounding bone level.
● For use with external irrigation.
Description Catalog No.
3.75mm Countersink Drill 13040
4.75mm Countersink Drill 13041
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -27-
28. Surgical Instrumentation for
RENOVA Straight Implants
Surgical Taps for RENOVA Straight Implants
● For pre-tapping bone prior to implant placement.
● Latch-type tap can be used in a handpiece or can be operated manually
when used with the Surgical Ratchet (L1702-01) and Ratchet/Tap
Adapter (L1806-05).
● For use with external irrigation.
● Offered in 2 lengths.
Short – for RENOVA straight implants up to 11.5mm
Long – for RENOVA straight implants up to 16mm
SDI 3.75 Straight Surgical Taps
Description Catalog No.
3.75 x 11.5mm Tap 13042
3.75 x 16mm Tap 13043
RDI 4.75 Straight Surgical Taps
Description Catalog No.
4.75 x 11.5mm Tap 13044
4.75 x 16mm Tap 13045
-28- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
29. Additional Surgical Instrumentation
for Tapered and Straight Implants
Depth Gauge ● Verifies depth of the surgical site.
● Depth marks correspond to implants lengths.
Description Catalog No.
2.35mm Depth Gauge (for straight implants) 10589
Parallel Pins ● Used as a visual guide during surgery to help ensure parallel
implant placement.
Description Catalog No.
2.0mm Parallel Pin (tapered & straight implants), 2-pk 10028*
2.35/2.8mm Parallel Pin (straight implants), 2-pk 13029*
Surgical Ratchet, Adapter and Extenders
Description Catalog # ● Ratchet is used for manual operation of the Surgical
Taps and/or final tightening of the implant.
Surgical Ratchet L1702-01
● Ratchet Extenders enable clearance of adjacent teeth.
Ratchet Adapter, 8mm L1806-04
(for NP Placement Heads)
Instrumentation & Motor
Ratchet/Tap Adapter, 12mm L1806-05
(for NP Placement Heads & Surgical Ratchet
Latch-Type Surgical Taps)
Ratchet Extender, Short & Long L1703-01
(to extend the Ratchet
Adapters)
Replacement O-Rings for L1806-03
Ratchet Adapter, Qty. 4
NP Ratchet Adapters Ratchet Extenders
Narrow Profile (NP) ● Narrow design improves intra-oral access during implant placement.
● Color anodized for easy identification of implant/placement head junction.
Placement Heads ● External flats correspond to the flats of the implants internal hex for
easy indexing.
Instrumentation Required:
❍ .048" Hex Driver
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
3.5mm Placement Head 10585 10587
5.5mm Placement Head 10586 10588
15mm Placement Head 10579* 10580*
* Call for availability
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -29-
30. Direct-to-Implant ● Connects directly to RENOVA Tapered and Straight Implant prosthetic
connections for adjusting implant insertion depth during first stage surgery.
Ratchet Adapters ● Used in conjunction with the Surgical Ratchet.
SDI 3.75mm RDI 4.5/4.75mm
Description Catalog No. Catalog No.
Adapter, short 10590 10592
Adapter, long 10591 10593
Stabilizing Wrench ●
●
For use only with Narrow Profile (NP) Placement Heads.
Use open or closed end to stabilize the implant during loosening of the
placement head screw.
● Features a special pin to engage the Ratchet Adapter (L1806-04) and
stabilize the implant during manual placement.
Description Catalog No.
Stabilizing Wrench L1709-01
Handpiece ● Inserts into the handpiece and connects to the RENOVA NP Placement
Placement Adapter Head for motor driven implant placement.
Description Catalog No.
Handpiece Adapter (for NP placement heads) L1406-01
Hand Adapter for ● Connects to the RENOVA NP Placement Head and carries the implant to
the surgical site for hand delivered implant placement.
Narrow Profile (NP) ● Can also be used to remove the placement head by inserting a hex
Placement Head driver through the top end to loosen the screw and then carry the
placement head assembly out of the mouth.
Description Catalog No.
Hand Adapter (for NP placement heads) L1406-02
-30- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
31. Titanium Forceps ● Titanium Forceps are used to handle implants and other titanium
components to avoid possible contamination.
Description Catalog No.
Titanium Forceps R9119
Locking Drill Extender ● Adds 17mm of length to any latch-type drill or driver.
● Useful when drilling next to adjacent teeth.
Description Catalog No.
Locking Drill Extender L1404-01
Implant Sizing Overlays
● Use these transparent overlays with radiographs for pre-surgical
assessment and implant selection.
● 100% (1:1) Sizing Overlay for use with peri-apical x-rays.
● 125% Sizing Overlay for panoramic radiographs.
Instrumentation & Motor
Description Catalog No.
Tapered Implant 100% (1:1) Sizing Overlay 14050*
Tapered Implant 125% Sizing Overlay 14051*
Straight Implant 100% (1:1) Sizing Overlay 13027*
Straight Implant 125% Sizing Overlay 13028*
* Call for availability
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -31-
32. Wrenches and Drivers
Accu-Torque Wrenches & Accessories
20Ncm Torque Wrench
● Pre-calibrated wrenches precisely deliver proper torque.
● Use with Accu-Torque Drivers.
● Conversion Handle allows use of Accu-Torque Drivers as hand drivers. 30Ncm Torque Wrench
Description Catalog No.
Accu-Torque Wrench, 20Ncm ISS1101
Accu-Torque Wrench, 30Ncm ISS1102
Conversion Handle for
Conversion Handle for Accu-Torque Drivers, Swivel Head ISS1112 Accu-Torque Drivers
Replacement O-Rings for Accu-Torque Drivers, Qty 6 ISS1111
Torque Wrench Care and Maintenance
Cleaning and Sterilization:
● Before initial use and after each procedure, clean the torque wrench with a wet towel or disinfectant wipe.
Rinse under warm tap water and wipe dry.
● Before sterilization, spray an approved (handpiece type) instrument lubricant into the opening at the back of
the wrench.
● Sterilize with the handle in the broken position.
● Wrench may be sterilized by steam autoclave. Do not exceed 125°C (257°F).
● Always use the dry cycle.
● Do not use “Flash Sterilization” techniques.
● After sterilization, reset the torque break handle, then manually “break” the hinge again to ensure the wrench is
operating correctly.
Calibration:
For proper function and accurate control, Accu-Torque Wrenches should be calibrated every 6 months (or after 100
autoclave cycles). For calibration or repair, wrenches should be sent directly to:
Micromotor Repair Station
151 East Columbine Avenue
Santa Ana, CA 92707 USA
800-562-6204
Outside the U.S.: 714-546-4045
* For Lifecore’s Torque Wrench warranty information, please reference the Ordering & Warranty Information section on page 37.
-32- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
33. .048" Hex Drivers ● Use with .048" hex placement head screws, healing abutments,
abutment screws and impression posts.
● Tapered hex tip allows screws to be carried to the implant site.
Description Catalog No.
.048" Hex Driver, Swivel Head, Short (8mm shaft/19mm total length) R9121
.048" Hex Driver, Swivel Head, Long (13mm shaft/24mm total length) R9122
.048" Hex Driver, Latch-Type, Short (23mm total length) L1400-48-23
Hex Latch Type Accu- .048" Hex Driver, Latch-Type, Long (28mm total length) L1400-48-28
Driver Driver Torque
Driver .048" Hex Driver, for Accu-Torque Wrench, Short (8mm shaft) ISS1104
.048" Hex Driver, for Accu-Torque Wrench, Long (15mm shaft) ISS1109
.062" Hex Drivers ● Used for Fixed Detachable Abutments.
● Tapered hex tip allows abutments to be carried to the implant site.
Description Catalog No.
.062" Hex Driver, Swivel Head, Short (8mm shaft/19mm total length) L2100-62-19
.062" Hex Driver, Swivel Head, Long (13mm shaft/24mm total length) L2100-62-24
.062" Hex Driver, Latch-Type, Short (23mm total length) L1400-62-19
.062" Hex Driver, Latch-Type, Long (28mm total length) L1400-62-23
Instrumentation & Motor
Swivel Latch- Accu-
Head Type Torque
Driver Driver Driver .062" Hex Driver, for Accu-Torque Wrench, Short (8mm shaft) ISS1119
.062" Hex Driver, for Accu-Torque Wrench, Long (15mm shaft) ISS1120
Overdenture
● Used for Snap Abutments.
Abutment Drivers
Description Catalog No.
Overdenture Driver, Swivel Head (8mm shaft) L2100-96-19
Overdenture Driver, Latch-Type (20mm total length) L1404-96-20
Overdenture Driver, for Accu-Torque Wrench* (8mm shaft) L2101-96-16
Swivel Latch Accu-
Head Type Torque
Driver Driver Driver
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -33-
34. Lab Tools & Other Products
Hader Bar and Clip System
● A simple, effective bar system, featuring a plastic bar pattern and
nylon clips, which are processed into the removable prosthesis.
● Mechanical snap retention.
Hader Castable Bar
Description Catalog No.
Hader Hader Castable Bar And Clip System ISS185H
Processing Clip (includes 1 Hader Bar, 6
Processing Clips, 6 Final Clips & 1 Hader Tool)
Hader Hader Castable Bar ISS185B
Final Clip
Hader Processing Clips, Qty. 6 ISS185HP
Hader Final Clips, Qty. 6 ISS185HR
Hader Metal Hader Clip Metal Housings, Qty. 6 ISS526H
Housing Clip
Hader Tool ISS185T
Hader Tool
-34- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
35. Component Pack ● Organizes small components such as the implant cover screws,
placement heads, etc.
● Autoclavable design with slide lid interlocks into the base of the
surgical kits.
● Optionally, may be used as a stand-alone organizer.
Description Catalog No.
Component Pack L1812-01
Instrument Cleaning Detergent
• For use with all Lifecore instruments and surgical kits.
• Includes recommended cleaning instructions.
Cleaning Detergent L1819-01
Instrumentation & Motor
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -35-
36. LC5000 Surgical Motor System
LC5000 Features:
Lifecore’s LC5000 is a
simple, user-friendly motor
with abundant features for
implantology and oral and
maxillofacial microsurgery.
Carefully designed features,
place the LC5000 in a class
of its own. The unique
motor with large on-screen
graphics display, straight-
forward console layout, foot
pedal control and
Program/Patient Information
Smart Cards exemplifies
high performance.
Since the LC5000 is manufactured specifically for Lifecore Biomedical, it comes complete with Lifecore’s
surgical protocol preprogrammed and is backed by a full one-year warranty. In addition, the compact design
helps maximize surgical work area.
● Compact design helps maximize surgical work area
● Large, easy-to-read display clearly identifies motor settings including procedure, rpm, torque, irrigation flow rate, etc.
● Unique foot pedal design with large buttons simplifies access to functions during surgery.
Also provides variable speed control.
● A versatile 20:1 handpiece can be used for drilling, tapping and implant placement (sold separately).
● Torque Bar display provides a visual reference of torque delivered during procedures.
● Program Data Smart Card instantly saves/retrieves up to 20 custom program settings.
● Patient Data Smart Card & PC Software stores patient information for documenting patient treatment data.
● Auto-Calibration function for motor/handpiece enables superior rpm and torque control.
● Full one-year warranty included. Extended warranty options also available. Contact Lifecore Client Service or your
sales representative for more details.
Lifecore LC5000 Surgical Motor System Package
Description Catalog #
LC5000 Surgical Motor and Console 10594
20:1 Handpiece 10595
10-pack of Sterile Irrigation Tubing 10598
Testing Gauge for Latch-Type Instrument Shanks 10602
PC Software Updating Kit 10611
Service Oil, 50ml* 10604
-36- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300
37. Lifecore LC5000 Surgical Motor Accessories
Description Catalog #
LC5000 Surgical Motor Unit 10594
20:1 Reduction Contra-Angle Handpiece - for implant surgery
(up to 150,000 rpm when used with LC5000 Motor) 10595
1:1 High Speed Straight Handpiece
(up to 30,000 rpm when used with LC5000 Motor) 10596
1:5 High Speed Straight Handpiece
(up to 30,000 rpm when used with LC5000 Motor) 10597
Irrigation Tubing, Sterile, 10-pack 10598
Irrigation Needle, 2-pack 10599
Y-Connector, 2-pack 10600
Y-Tubing, 2-pack 10601
Testing Gauge (for latch-type instrument shanks) 10602
Travel Case (for LC5000 Motor System) 10603
Service Oil, 50ml* 10604
Service Oil, 250ml (6-pack)* 10613
Instrumentation & Motor
Sterilization Protector for Motor 10607
Sterilization Case 10606
Patient Data Smart Card, 1-pack (for LC5000) 10608
Program Data Smart Card, 1-pack (for LC5000) 10609
System Software Card, 1-pack (for LC5000) 10610
PC Software Updating Kit 10611
USB Cable Adapter 10612
*Due to aerosol service oil can, special shipping and handling is required. Please contact Client Service for shipping rates.
For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300 -37-
38. Tissue Regeneration Products
®
CAPSET Calcium Sulfate Bone Graft Barrier
CAPSET Calcium Sulfate Bone Graft Barrier is a barrier designed to be used over bone
grafting material to aid bone regeneration. Each CAPSET kit contains proprietary
formulation calcium sulfate and an accelerating solution. When mixed together,
they form a paste, which is molded into place over bone grafting material.
CAPSET Features:
• Bioresorbable
• Conforms to Defect
• Easy to Use
• Positive Tissue Response
• Offers Longer Working Time (SlowSet)
• Ideal for Multiple Defects (SlowSet)
The 0.25gm reserve cup of calcium sulfate can act as a binder when mixed with
Bone Allograft, Autogenous Bone, Xenografts or Synthetic Bone grafting material.
• Improves handling properties • Reduces particle migration
Description Catalog #
CAPSET 1.0gm 4061-10
CAPSET 2.0gm 4061-20
CAPSET SlowSet 1.0gm 4064-10
CAPSET SlowSet 2.0gm 4064-20
0.25gm Reserve Cup, 6-Pack 4061-025
-38- For assistance in the U.S., call 1-800-752-2663, outside the U.S., call 952-368-4300