There are many types of roofings are available in the market. Homeowners have to check for the roofing whether it is needed maintenance or reroofing should be done for the home.here are few basic process about roofing.
VVVIP Call Girls In Greater Kailash ➡️ Delhi ➡️ 9999965857 🚀 No Advance 24HRS...
Basic process of roofing techniques
1. Basic process of roofing techniques
http://thelegendgs.com.au/roof-restoration/
2. Roofing materials
• We have to understand the basic types of roofing before the
homeowner decide to install new roof or repairing old roof in
their home.
• First we have to understand the roofing materials and what
kinds of roof suits for your home.
• There are many types of
shingles(http://thelegendgs.com.au/types-of-shingles-
involved-in-roofing-process/) are available for your home and
choose the best shingles that suits your home.
3. • Asphalt composite shingles: Cheap and easily obtainable, but
less attractive than other options due to flat appearance.
• Wood Shake: Pricey but attractive shingle.
• Metal Roofing: Still rare, and few roofers know how to install
it well; special companies are required for this job.
• Slate Roofing: Highly attractive, and a high-end roofing
option; extremely slippery to walk on.
• Rubber Slate or Faux Slate: Recycled post-industrial synthetics
gaining in popularity.
4.
5. Remove shingles or roof over them
• The weight issues are the main argument against laying
additional layers of asphalt shingles is that the roofing
materials can get too heavy for the underlying roof framing.
• This can be a structural problem, especially for older houses.
It is often said that a triple layer of asphalt shingles is equal to
a single layer of slate shingles an exceedingly heavy type of
material.
• One other problem with shingling over existing shingles is that
you are essentially repeating some of the surface irregularities
that may already be there.
6. • Putting new shingles over that doesn’t do much for the aesthetic
aspect.
• One way to minimize this problem is to go over the old roof and
correct as many problems as you can.
• It doesn’t take much more than a hammer, some roofing nails, and
a handful of shingles to correct the problem of bumps, gaps, and
protruding nails.
• Re-roofing –(http://www.slideshare.net/danielvhenny/helpful-
steps-in-reroofing-the-house)Stripping up off the existing layer and
then laying down the new layer adds more work to the process.
7.
8. Best season for roofing
• If roofers only wanted for perfect conditions to install a roof,
they would go out of business. Extending work seasons helps
roofers and consumers alike.
• In most parts the optimal roofing season is from late spring to
early fall.
• Partially installed areas must be perfectly dry before any
covering layers are installed.
9.
10. Basic process in roofing
• Remove all existing shingles, deposit them in a roll-off, and
remove.
• Make minor repairs on roof if in good condition. If not,
replace bad wood with plywood, whichever is applicable to
your roof.
• Install ice dam protection barrier of synthetic materials to
prevent backed up ice in the gutters which prevents ice-melt
from draining away.
• The ice-melt will permeate under the shingles and cause
damage to the inside of your house.
11. • Lay down asphalt paper.
• Apply the shingles - starting at the eaves and working upward.
• Apply flashing around all areas where leaks might come into
the house - against the chimney, stack vents, etc.
• Install the ridge vent.
12.
13. Saving cost
• Roofing contractors have a great deal of flexibility to
negotiate on the cost on roofing your home.
• The roof restoration service
(http://thelegendgs.com.au/roof-restoration-services-
blog/)has highest professional standard for quality results
and workmanship.
• They will work according to adhere standards and
regulations of roofing.