WD USB HDD Image Un‐locker Pro‐INIC1607e is a tool that can unlock and decrypt encrypted images of WD USB hard drives with the INIC1607e controller chip. It allows users to view data that has been imaged to another "good" hard drive after interface conversion or firmware fixes, as the imaging process encrypts the data by default. The tool involves removing the U14 chip from the original PCB and inserting it into the unlocker device connected to the target drive where the image resides. This decrypts the image so users can access the recovered data. However, encryption by additional software may not be bypassed.
St5400.6 500 g sata hdd sector access interruption fix bad sectors after 1 pe...
Wd usb hdd image un locker pro-inic1607e
1. WD USB HDD Image Un‐locker Pro‐
INIC1607e
http://www.dolphindatalab.com/wd‐usb‐hdd‐image‐un‐locker‐pro‐inic1607e
WD USB HDD Image Un‐locker Pro‐INIC1607e is to unlock the WD USB hdd image if the model of
USB HDD main controller IC is INIC1607e.
Free Shipping Worldwide by DHL express and it takes 3
working days around to the clients!
Related Products: WD USB HDD Image Un‐locker Pro‐JMS538S WD USB HDD Image Un‐locker
Pro‐SW6316 Before users can understand this tool, it's necessary to learn how to recover data from
USB hard drives. To recover lost data from USB hard drives is mostly more difficult than to do it for
SATA and IDE hard drives. There're several kind of situations for USB hdd data recovery: 1, If the
USB hard drive is detected in PC, users can use some professional data recovery hardware tools
like our DFL‐WDII to handle on the firmware issue or use our DFL‐DE or DDP to scan the lost
partitions and files; 2, If the USB hard drive is not detected in PC, it's a must to convert the USB
interface to SATA interface or change the USB PCB to SATA PCB and remove the ROM chip‐U12 from
the original PCB to the SATA PCB; 3, After the interface conversion and fixing the firmware problem
of the USB hdd, users need to image the original USB hdd to a good target hdd, however, all data
imaged to the good hdd is encrypted which is done automatically by the WD USB hdd hardware
design itself; 4, To view the data in the good hdd, it is necessary to decrypt the image and at this
time, we designed the WD USB HDD Image Un‐locker Pro, users just need to find out the main
controller IC model, select the right unlocker and insert the good target hdd, remove the U14 and
insert it to the chip holder, power on the hdd and connect the USB cable to PC and users can view
the data then.
2. Please note: if the original USB hdd is encrypted by some special software like WD smartware, this
one cannot be fixed by our tool so far. After users are able to connect the USB hard drives and
handle on it and finally able to image the USB hdd to a good target hdd, users may not extract the
data as well due to the encryption and at this time, users need to use the original PCB board
including the main controller ic and U14 chip to decrypt the image. So users need to have very
sufficient soldering skills and very careful and patient data recovery attitude. In this way, users may
waste a lot of time and increase the risk of damaging the chips or even the PCB and finally lose in
the competition. Some common WD USB hard drives which have main controller IC model
of INIC1607e are 2060‐771754‐000, 2060‐7016175‐004 and 2060‐7016175‐001.
Data Recovery Tools:
HDD Repair Tools http://www.dolphindatalab.com/product‐category/hdd‐repair‐tools/
Data Recovery Hardware http://www.dolphindatalab.com/product‐category/data‐
recovery‐hardware/
DFL‐STII Seagate HDD Firmware Repair
Tool http://www.dolphindatalab.com/product/seagate‐hdd‐firmware‐repair‐tool‐dfl‐
stii/
DFL‐DE Data Recovery Hardware http://www.dolphindatalab.com/product/data‐
extractor‐dfl‐de/
DFL‐DDP Data Recovery Equipment http://www.dolphindatalab.com/product/dfl‐
data‐dr‐pro‐usb‐3‐data‐recovery‐equipment/