Digital Locker Dedicated Repository Api Specification v1 4

Dedicated Repository API Specification
Version 1.4

1
Revision History
Version Date Author Comments
1.2 15/07/2015 Amit Jain (NeGD) New release of Digital Locker. Added
CSV support for uploading URIs.
1.3 30/07/2015 Amit Savant (NeGD) Removed two attributes from Pull
URI API Response - file_name,
Aadhaar name.
1.4 08/08/2015 Amit Savant (NeGD) Specified the date format for CSV
data.

2
Table of Contents
Revision History.......................................................................................................................................................1
Introduction...............................................................................................................................................................3
Digital Locker System Overview .......................................................................................................................3
Key Terminology .....................................................................................................................................................3
On-Boarding Flow...................................................................................................................................................5
Document Codification Scheme.........................................................................................................................5
Unique Document URI ......................................................................................................................................5
Issuer ID (mandatory)......................................................................................................................................6
Document Type (mandatory)........................................................................................................................6
Document ID (mandatory)..............................................................................................................................6
Document Issuance Flow .....................................................................................................................................7
E-Document Specifications..................................................................................................................................7
Document URI......................................................................................................................................................7
Document Owner................................................................................................................................................8
Document Format...............................................................................................................................................8
Issuer Interfaces ......................................................................................................................................................8
PUSH URI to Digital Locker.............................................................................................................................9
Pull URI Request API......................................................................................................................................10
Pull URI Request API elements..............................................................................................................10
Pull URI API Response...............................................................................................................................11
Pull URI API Response elements...........................................................................................................12
Pull Doc Request API......................................................................................................................................13
Pull Doc Request API elements..............................................................................................................13
Pull Doc API Response ..............................................................................................................................13
Pull Doc API Response elements...........................................................................................................14

3
Digital Locker API Specification
Introduction
This document provides detailed specification of the Digital Locker APIs. These APIs will be
used by various issuer departments to push their documents to the Digital Locker
repository. This document assumes that the reader is aware of the Digital Locker
application functionality and has read the Digital Locker Technical Specification (DLTS).
Digital Locker System Overview
The proposed architecture of the Digital Locker system is described in “Digital Locker
Technical Specifications (DLTS)” document. Digital Locker system consists of e-Documents
repositories and access gateways for providing an online mechanism for issuers to store
and requesters to access a Digital Document in a uniform way in real-time.
Key Terminology
1. Electronic Document or E-Document – A digitally signed electronic document in
XML format issued to one or more individuals (Aadhaar holders) in appropriate
format compliant to DLTS specifications. Examples:
• Degree certificate issued to a student by a university.
• Caste certificate issued to an individual by a state government department.
• Marriage certificate issued to two individuals by a state government
department.

4
2. Digital Repository – A software application complying with DLTS specifications,
hosting a collection (database) of e-documents and exposing a standard API for
secure real-time access.
• While architecture does not restrict the number of repository providers, it is
recommended that few highly available and resilient repositories be setup
and encourage everyone to use that instead of having lots of repositories.
3. Digital Locker – A dedicated storage space assigned to each resident, to store
authenticated documents. The digital locker would be accessible via web portal or
mobile application.
4. Issuer – An entity/organization/department issuing e-documents to individuals in
DLTS compliant format and making them electronically available within a repository
of their choice.
5. Requester – An entity/organization/department requesting secure access to a
particular e-document stored within a repository. Examples:
• A university wanting to access 10th standard certificate for admissions
• A government department wanting to access BPL certificate
• Passport department wanting to access marriage certificate
6. Access Gateway – A software application complying with DLTS specifications
providing an online mechanism for requesters to access an e-document in a uniform
way from various repositories in real-time.
• Gateway services can be offered by repository providers themselves.
• While architecture does not restrict the number of repository providers, it is
suggested that few resilient and highly available central gateway systems be
setup and requesters can signup with any one of the gateways for accessing
documents in the Digital repositories.
7. Document URI – A unique document URI mandatory for every document. This
unique URI can be resolved to a full URL to access the actual document in
appropriate repository.
• Document URI is a persistent, location independent, repository independent,
issuer independent representation of the ID of the document.
• The existence of such a URI does not imply availability of the identified
resource, but such URIs are required to remain globally unique and
persistent, even when the resource ceases to exist or becomes unavailable.
• While document URI itself is not a secret, access to the actual document is
secure and authenticated.

5
On-Boarding Flow
Document Codification Scheme
Unique Document URI
Every document that is issued and made accessible via e-Locker system must have a unique
way to resolve to the correct repository without conflict. This is critical to eliminate the
need for all documents reference to be in one system. Federated repositories storing
documents issued by various departments/agencies must be “reachable” via the gateway in
a unique fashion.
Get Issuer ID
Create
Document type
Generate URI
Map URI with
e-Document
Create CSV File
and upload via
issuer login
Create REST
based Pull URI
Request API
Create REST
based Pull Doc
Request API
All documents issued in compliance to DLTS should have the following URI format:
IssuerId-DocType-DocId where
IssuerId is a unique issuer entity ID across the country
DocType is the document type optionally defined by the issuer
DocId is a unique document ID within the issuer system

6
Issuer ID (mandatory)
All departments/agencies within government issuing citizen documents, termed as “Issuers”
must have a unique identification to ensure all documents issued by them are accessible via
DLTS gateway.
Examples of issuer Ids are “maharashtra.gov.in” (Maharashtra State Government),
“kseeb.kar.nic.in” (Karnataka School Board”, “cbse.nic.in” (CBSE School Board), “UDEL”
(Delhi University), etc. These codes MUST BE unique across India and published as part of
standard e-governance codification list.
Document Type (mandatory)
Issuers can freely define a list of document types for their internal classification. For
example, CBSE may classify certificates into “MSTN” (10th mark sheet), “KVPY” (certificate
issued to KVPY scholarship fellows), etc. There are no requirements for publishing these via
any central registry.
Classifying documents into various types allows issuers to choose different repositories for
different types. This is to future proof the design without making assumption that all
certificates issued by the issuer are available in same repository. This also allows migration
from one repository to another in a gradual way. Issuers are free to define their document
types without worrying any collaboration across other issuers. Keeping the length minimal
allows manual entry of document URI without making it too long. Hence it is recommended
to keep length to be only up to 5.
Document ID (mandatory)
A document ID determined by the department/agency (issuer) should be assigned to every
document. It MUST BE unique either within the document types of that issuer or it can be
unique across all document types of that issuer.
It is recommended that issuers define document types either using pure alpha
case-insensitive strings of length up to 5. These document types MUST BE unique
WITHIN the issuer system. This classification within the issuer system also allows
versioning of documents making future documents to be of different formats and in
different repositories without having the need to have all documents in one repository.
If need arises in future to go beyond length 5, maximum length of doc type can
easily use increased without breaking compatibility any existing systems and
documents.
It is recommended that list of unique issuer codes be derived via their domain URL
whenever available and be published as part of e-governance standard codification
scheme with ability to add new issuers on need basis. When URL is not available for a
department, a unique (alpha) code may be assigned.

7
Document Issuance Flow
Document issuance flow is given below:
1. Create a digitally signed e-document complying to DLTS specification with a unique
URI .
a. Issuer entity uses the unique code for itself (obtain a new one if not already
listed) that is available in common DLTS Issuer Codification e-governance
standards. This is a country wide “Unique Issuer ID.
b. Document type codification is done by the Digital Locker system administrator.
Issuers may choose an available document type or if a new type of document is
being issued then request Digital Locker team to create the required document
type.
2. Issuer should create a document repository for storing documents and making it
available online. This could be an existing database or document management
system where the issued documents are stored.
3. Issue the printed document to the individual(s) for whom the document is issued to
with a human readable document URI.
a. Issuer should also offer an option to people to push the document URI to the
digital lockers of the resident for whom the document was issued.
E-Document Specifications
Document URI
All documents issued in compliance to DLTS should have the following URI format:
<IssuerId>[-DocType]-<DocId>
Where,
IssuerId (mandatory) - is a unique issuer entity ID. This is a unique pure alpha
case-insensitive string. To easily make it unique, department’s domain URL can be
used whenever available. The list of issuer Ids must be published and should have a
mechanism to add new ones as required. Unique list of Issuer IDs MUST BE
unique and published via central e-governance codification scheme.
Document ID is an alpha-numeric string with maximum length of 10. It is
recommended that issuers define document IDs either using pure alpha case-
insensitive string using a RANDOM number/string generator. Document IDs MUST
BE unique WITHIN the issuer system within a document type. If need arises in
future to go beyond length 10, maximum length of doc ID can easily use increased
without breaking compatibility any existing systems and documents.
Using random string eliminates the possibility of “guessing” next sequence number and
accessing a list of documents in a sequential way. This is critical to ensure security of
documents and ensures document can be accessed ONLY IF the requester “knows” the
actual document ID (instead of guessing sequential numbers).
It is highly recommended that issuer needing to issue a total of n documents within a
document type use at least 10n random space from which the strings/numbers are
chosen to randomly allocate. Notice that since document types allow further
classification, it is suggested to keep the length minimal. Since issuers can easily add a
new document type without any collaboration and approvals across other issuers, if
more numbers are required, a new document type may be introduced.

8
DocType (mandatory) - is the document type optionally defined by the issuer. This
is highly recommended for document classification and versioning purposes. Issuers
may decide their own classification mechanism. This is a 5 char pure alpha string
which can be expanded in future as needed.
DocId (mandatory) - is a unique document ID of length up to 10 within the issuer
system. It is highly recommended that this is either purely numeric or alpha to avoid
confusion with “0” with “o” etc. Also, it is highly recommended to use random strings
to avoid guessing the sequence of document IDs.
Document Owner
For avoiding document misuse, it is critical that all documents are “attached” to one or more
Aadhaar holders. For example, a caste certificate may be attached to one Aadhaar holder
while a marriage certificate is attached to two Aadhaar holders. Proposed DLTS solution
offers a mechanism for issuers to secure access via Aadhaar authentication of any of the
owners.
Document Format
All e-documents must be represented in PDF or XML format complying to DLTS
specifications. This ensures that a standardized XML structure is used to capture common
attributes of all documents.
Issuer Interfaces
Each issuer organization will have to consume or implement 3 interfaces to fully integrate
with the Digital Locker system. These 3 interfaces are:
1. Push URI to Digital Locker: This web based interface is provided to the issuers by
Digital Locker system to push the URI’s of all the documents available in their
repositories so that the same can be displayed to the residents. This will be a way if
notifying the resident that a particular issuers has following documents linked to the
user’s Aadhaar number.
2. Pull URI Request API: This REST based pull interface has to be implemented by the
issuer organization to allow a resident to query the issuer repository by providing
his/her Aadhaar number or any other identifier applicable to issuer organization
(such as Roll number + Year + Class for CBSE). This way the issuer may provide the
URI’s of all the documents that are linked to the Aadhaar number or other identifiers
provided by the resident.
3. Pull Doc Request API: This REST based pull interface has to be implemented by the
issuer organization to allow a resident to fetch a document from the issuer
repository by providing the URI of the document.
These 3 interfaces are defined in greater details below.

11
UDF1 (Optional): User Defined Field
Pull URI API Response
The response to the PULL URI request will include the URI of any documents linked to the
given Aadhaar number in the request as well as additional meta data of the document. The
issuer will provide the response back to the Digital Locker system synchronously.
The following is the XML response template for the PULL URI Response API.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<PullURIResponse xmlns:ns2="http://tempuri.org/">
<ResponseStatus StatusCode="" Status="1" ts=” YYYY-MM-DDThh:mm:ss+/-
nn:nn” txn=""> //1-Success //0-Failure
</ResponseStatus>
<EDocList URICount="2" IssuerCode="">
<Edoc>
<Meta uri="testt.in.gov.kerala.edistrict-A001116301471-420"
doc_type="Main" doc_name="ABCD" app_id="4200"
issueDateTime="05/02/2015" issuedToUID="221723431724">
<Owners>
<Aadhaar uid="221723431724"/>
</Owners>
<UDF1></UDF1> //User Defined Field
<Print format="" highResUrl="" lowResUrl=""/>
</Meta>
<Signature/>
</Edoc>
<Edoc>
<Meta uri="testt.in.gov.kerala.edistrict-A001116301471-421"
doc_type="Main" doc_name="ABCD" app_id="4200"
issueDateTime="05/02/2015" issuedToUID="221723431724">
<Owners>
<Aadhaar uid="221723431724"/>
</Owners>
<Print format="" highResUrl="" lowResUrl=""/>
</Meta>
<Signature/>
</Edoc>
</EDocList>
</PullURIResponse>

12
Pull URI API Response elements
ts (mandatory) = timestamp
txn (mandatory): Transaction id (same as the one received in the request)
uri (mandatory): URI identifies the document uniquely. Please refer to the Document
Codification Scheme to create the URI.
doc_type (mandatory): Defined by the Issuers. By default it is “MAIN”. It is for future use,
say in case a Supporting Document Type is added to the repository.
doc_name (mandatory): This is name of the document. This meta data will be used while
displaying the document in the User Digital Locker/ Requestor interface to identify the
document
app_id (mandatory): Unique id of the issuers application which generated the document.
This will be helpful in keeping the audit trail of source of the generated document.
issueDateTime(mandatory): Issued date and Time of the document to the user. Incase of
batch submission of the document to the repository, this can be a past date/time value.
issuedToUID (mandatory): Aadhaar Number of the Issuee.
Aadhaar UID (mandatory): Aadhaar Number of the owner of the document.
Print format (mandatory): Print Format specifies the document format type to be adopted
while printing. At present the value is APPLICATION/PDF only. It will provide the rendering
information to the REQUESTOR.
highResUrl (Optional): This stores the URL of the high resolution document available with
the ISSUER. This can be left blank at present.
lowResUrl (Optional): This stores the URL of the low resolution document available with
the ISSUER. This can be left blank at present.
docBody (Optional): issuer can add meta content specific to doc here. e.g.
<taluka>Borivali</taluka>in this tag.
Signature (Mandatory): The ISSUER has to sign the PUSH request with its Digital
Signature.

13
Pull Doc Request API
The REST based Pull Doc Request API has to be implemented by the issuers and will be
consumed by Digital Locker system. This API will be invoked when the resident clicks on
the URI displayed in the Govt. Issued documents section of the Digital locker portal. At the
time of the click the Digital Locker system will query the issuer repository to fetch the
document linked to the URI being clicked.
The following is the XML request template for the PULL Doc Request API.
The User details will be issued by the issuer to the Digital Locker system. This would consist
of Username and User Key.
<PullDocRequest xmlns:ns2="http://tempuri.org/" ver=”1.0” ts=” YYYY-
MM-DDThh:mm:ss+/-nn:nn” txn=”” orgId=”” keyhash="sha256(key+ts)">
<DocDetails txn="">
<URI>testt.in.gov.kerala.edistrict-A001116301471-420</URI>
</DocDetails>
</PullDocRequest>
Pull Doc Request API elements
txn (Mandatory) = transaction id
orgId (mandatory): Org Id is the id issued to Digital locker system by the issuer system as
part of allowing access to the Issuer APIs.
keyHash (mandatory): Key hash is SHA-256(API-key+ts). API key is provided to the
Digital Locker system by issuer system to access the issuer APIs.
uri (mandatory): URI identifies the document uniquely
Pull Doc API Response
The response to the PULL Doc request will include the Doc content of any documents linked
to the given URI in the request. The issuer will provide the response back to the Digital
Locker system synchronously.
The following is the XML response template for the PULL Doc Response API.

14
<PullDocResponse xmlns:ns2="http://tempuri.org/">
<ResponseStatus StatusCode="" Status="1" ts=” YYYY-MM-
DDThh:mm:ss+/-nn:nn” txn=""> //1-Success //0-Failure
</ResponseStatus>
<DocDetails>
<docContent>
//Bytes encoded with Base64 in string format
</docContent>
</DocDetails>
</PullDocResponse>
Pull Doc API Response elements
txn (mandatory): Transaction id (same as the one received in the request)
statusCode (mandatory): URI identifies the document uniquely. Please refer to the
Document Codification Scheme to create the URI.
status (mandatory): Defined by the Issuers. By default it is “MAIN”. It is for future use, say
in case a Supporting Document Type is added to the repository.
docDetails (Mandatory): issuer can add meta content specific to doc here. e.g.
<taluka>Borivali</taluka>in this tag.
docContent (Mandatory): The ISSUER has to sign the PUSH request with its Digital
Signature.

Digital Locker Dedicated Repository Api Specification v1 4

Recomendados

Recomendados

Más contenido relacionado

Similar a Digital Locker Dedicated Repository Api Specification v1 4

Similar a Digital Locker Dedicated Repository Api Specification v1 4 (20)

Más de DigiLocker

Más de DigiLocker (9)

Último

Último (20)

Digital Locker Dedicated Repository Api Specification v1 4