The document discusses different types of reinforced polyethylene and polypropylene liner materials used in applications like ponds, canals, and waste containment. It provides details on the manufacturing processes and properties of various reinforced liner products, as well as recommended welding methods for installation.

1. Reinforced Polypropylene (RPP) and Reinforced Polyethylene (RPE) Liner Design and Installation Trevor Arthurs Director of R&D ECP Division of Intertape Polymer

5. Reinforced PE and PP Liner Manufacturing Process

6. Reinforced Geomembrane General Structure Copyright, 1999, Intertape Polymer Group

7. Tape Based Scrim Structure

8. Slit Tape Polyethylene Liners and Applications

10. Reinforced Geomembrane General Structure Copyright, 1999, Intertape Polymer Group

11. 2001 Project Before Re-build

12. Reshaping of Canal

13. Pulling out 12 mil Liner Panel

14. Covering The Liner

15. Finished Canal

16. 2001 Project in 2003

17. RPP Liners and Applications

19. Irrigation Ditch – RPP24

20. Irrigation Ditch – RPP24

21. Murder Rock Golf & CC – RPP24

22. Dairy Runoff Containment Pond – RPP24

23. Dairy Runoff Containment Pond – RPP24

24. CAFO – Waste Lagoon – RPP36

25. CAFO – Waste Lagoon – RPP36

26. CAFO – Waste Lagoon – RPP36

27. RPE Liners and Applications

30. RPE Liners – Irrigation Canal Lining Installed Over Cracked Concrete

33. Wedge Welder

34. Wedge Welder

35. Hot Air Welder

36. Floor Crawling Hot Air Welder

37. Thank You Are there any questions?