SlideShare una empresa de Scribd logo
1 de 18
You can do it I will show you how!
You will Need:
          A tube of caulk
          Caulk gun
          Thin rubber gloves (optional)
          Sponge if using latex caulk
First determine which type of
caulk you need:
           There are two basic types of caulk
The two types of caulk
are:
Latex and Silicone
The Differences Are:
                                 Silicone
Latex
 Use on wood, walls & other      Use on wet surfaces (around
    dry surfaces                     sinks, faucets, tubs)
                                
    Dries fast (2 hours)             Mold & mildew resistant
                                
    Can be painted                   Won’t shrink or crack
                                
    Can be used to patch small       Use on ceramic
    holes and gaps                   tile, glass, metal, plastic &
                                     wood
   Flexible but can shrink
                                    Not paintable
Next    Be sure to follow package directions
           Temperature and weather are
            important!
        Clean area to be caulked
           Remove dirt, grease and moisture
           Remove old caulk
Bead Size
             The “bead” is the caulk that comes
             out of the tube

             The size of the bead depends on
             the amount of caulk you need to
             fill the gap or hole

             You can control the size of the
             bead by where you cut the nozzle
             on the tube of caulk
Bead Size
•The size of the bead
depends on where
you cut the nozzle.

•The closer to the
end the smaller the
bead.

•The further from
the end the larger
the amount of caulk.
Loading the Caulk Gun
  Push lever at end of gun and hold in place


  At the same time pull metal bar back to allow
  room for caulk tube

  You can now use nozzle (also called spout)
  cutter on the side of the caulk gun
Push Lever

 Pull metal bar
 to allow room
 for cartridge.
Ready to use
 The caulk gun
 is loaded and
 ready to go!
Applying Caulk
            Apply caulk to surface


            Smooth using gloved finger


            Try to avoid excess, use a small
             amount
Before
Note gap in corner of
moulding
After
Gap is filled.
Smooth it out!
        Latex-use a damp sponge
        Silicone use gloved finger
           Be careful silicone is sticky
Let Surface Dry

          For Latex allow 2 hours to dry
          For Silicone allow 24 hours to cure
Congratulations!

  By caulking your own projects you can:
     Avoid costly repairs
     Not have to rely on others to help you
     Be empowered because you can to it
      yourself!
You can do it!



Give it a try!

Más contenido relacionado

Destacado

How shared spaces are changing world
How shared spaces are changing worldHow shared spaces are changing world
How shared spaces are changing world
Innovation Tank
 
Průzkum freelance podnikaní
Průzkum freelance podnikaníPrůzkum freelance podnikaní
Průzkum freelance podnikaní
Innovation Tank
 
Teorie baťova managementu
Teorie baťova managementuTeorie baťova managementu
Teorie baťova managementu
Innovation Tank
 
Sbornik o lokalnich ekonomikach a udrzitelnem rozvoji
Sbornik o lokalnich ekonomikach a udrzitelnem rozvojiSbornik o lokalnich ekonomikach a udrzitelnem rozvoji
Sbornik o lokalnich ekonomikach a udrzitelnem rozvoji
Innovation Tank
 
su dung drupal xay dung mang xa hoi
su dung drupal xay dung mang xa hoisu dung drupal xay dung mang xa hoi
su dung drupal xay dung mang xa hoi
hazzaz
 

Destacado (7)

How shared spaces are changing world
How shared spaces are changing worldHow shared spaces are changing world
How shared spaces are changing world
 
Mechanismus kampane
Mechanismus kampaneMechanismus kampane
Mechanismus kampane
 
Průzkum freelance podnikaní
Průzkum freelance podnikaníPrůzkum freelance podnikaní
Průzkum freelance podnikaní
 
Teorie baťova managementu
Teorie baťova managementuTeorie baťova managementu
Teorie baťova managementu
 
Sbornik o lokalnich ekonomikach a udrzitelnem rozvoji
Sbornik o lokalnich ekonomikach a udrzitelnem rozvojiSbornik o lokalnich ekonomikach a udrzitelnem rozvoji
Sbornik o lokalnich ekonomikach a udrzitelnem rozvoji
 
su dung drupal xay dung mang xa hoi
su dung drupal xay dung mang xa hoisu dung drupal xay dung mang xa hoi
su dung drupal xay dung mang xa hoi
 
New Era of Sustainability
New Era of SustainabilityNew Era of Sustainability
New Era of Sustainability
 

Similar a A Small Home Project-How to Caulk-You Can Do It

Research into steps in making different kinds of sculptures
Research into steps in making different kinds of sculpturesResearch into steps in making different kinds of sculptures
Research into steps in making different kinds of sculptures
Chelsea-Ann Cook
 

Similar a A Small Home Project-How to Caulk-You Can Do It (15)

Research into steps in making different kinds of sculptures
Research into steps in making different kinds of sculpturesResearch into steps in making different kinds of sculptures
Research into steps in making different kinds of sculptures
 
Part 3 Exterior Painting and Restoration
Part 3  Exterior Painting and RestorationPart 3  Exterior Painting and Restoration
Part 3 Exterior Painting and Restoration
 
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
 
Impression techniques
Impression techniquesImpression techniques
Impression techniques
 
Paintyourguitarhotrod
PaintyourguitarhotrodPaintyourguitarhotrod
Paintyourguitarhotrod
 
ppt
 ppt ppt
ppt
 
Peliculas delgadas pdf
Peliculas delgadas pdfPeliculas delgadas pdf
Peliculas delgadas pdf
 
steps of processing of complete denture (2).pptx
steps of processing of complete denture (2).pptxsteps of processing of complete denture (2).pptx
steps of processing of complete denture (2).pptx
 
Quetico 2013 Artist Residency Presentation
Quetico 2013 Artist Residency PresentationQuetico 2013 Artist Residency Presentation
Quetico 2013 Artist Residency Presentation
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
Grady275 windlass install
Grady275 windlass installGrady275 windlass install
Grady275 windlass install
 
Fused glass Unit
Fused glass UnitFused glass Unit
Fused glass Unit
 
Clay spec
Clay specClay spec
Clay spec
 

Último

Último (20)

Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
Integrating Telephony Systems with Salesforce: Insights and Considerations, B...
 
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
ASRock Industrial FDO Solutions in Action for Industrial Edge AI _ Kenny at A...
 
THE BEST IPTV in GERMANY for 2024: IPTVreel
THE BEST IPTV in  GERMANY for 2024: IPTVreelTHE BEST IPTV in  GERMANY for 2024: IPTVreel
THE BEST IPTV in GERMANY for 2024: IPTVreel
 
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
 
Top 10 Symfony Development Companies 2024
Top 10 Symfony Development Companies 2024Top 10 Symfony Development Companies 2024
Top 10 Symfony Development Companies 2024
 
Extensible Python: Robustness through Addition - PyCon 2024
Extensible Python: Robustness through Addition - PyCon 2024Extensible Python: Robustness through Addition - PyCon 2024
Extensible Python: Robustness through Addition - PyCon 2024
 
Speed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in MinutesSpeed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in Minutes
 
Strategic AI Integration in Engineering Teams
Strategic AI Integration in Engineering TeamsStrategic AI Integration in Engineering Teams
Strategic AI Integration in Engineering Teams
 
IESVE for Early Stage Design and Planning
IESVE for Early Stage Design and PlanningIESVE for Early Stage Design and Planning
IESVE for Early Stage Design and Planning
 
The UX of Automation by AJ King, Senior UX Researcher, Ocado
The UX of Automation by AJ King, Senior UX Researcher, OcadoThe UX of Automation by AJ King, Senior UX Researcher, Ocado
The UX of Automation by AJ King, Senior UX Researcher, Ocado
 
Syngulon - Selection technology May 2024.pdf
Syngulon - Selection technology May 2024.pdfSyngulon - Selection technology May 2024.pdf
Syngulon - Selection technology May 2024.pdf
 
Enterprise Knowledge Graphs - Data Summit 2024
Enterprise Knowledge Graphs - Data Summit 2024Enterprise Knowledge Graphs - Data Summit 2024
Enterprise Knowledge Graphs - Data Summit 2024
 
ECS 2024 Teams Premium - Pretty Secure
ECS 2024   Teams Premium - Pretty SecureECS 2024   Teams Premium - Pretty Secure
ECS 2024 Teams Premium - Pretty Secure
 
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
 
A Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System StrategyA Business-Centric Approach to Design System Strategy
A Business-Centric Approach to Design System Strategy
 
Where to Learn More About FDO _ Richard at FIDO Alliance.pdf
Where to Learn More About FDO _ Richard at FIDO Alliance.pdfWhere to Learn More About FDO _ Richard at FIDO Alliance.pdf
Where to Learn More About FDO _ Richard at FIDO Alliance.pdf
 
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdfIntroduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
 
Simplified FDO Manufacturing Flow with TPMs _ Liam at Infineon.pdf
Simplified FDO Manufacturing Flow with TPMs _ Liam at Infineon.pdfSimplified FDO Manufacturing Flow with TPMs _ Liam at Infineon.pdf
Simplified FDO Manufacturing Flow with TPMs _ Liam at Infineon.pdf
 
Salesforce Adoption – Metrics, Methods, and Motivation, Antone Kom
Salesforce Adoption – Metrics, Methods, and Motivation, Antone KomSalesforce Adoption – Metrics, Methods, and Motivation, Antone Kom
Salesforce Adoption – Metrics, Methods, and Motivation, Antone Kom
 
AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101
 

A Small Home Project-How to Caulk-You Can Do It

  • 1. You can do it I will show you how!
  • 2. You will Need:  A tube of caulk  Caulk gun  Thin rubber gloves (optional)  Sponge if using latex caulk
  • 3. First determine which type of caulk you need:  There are two basic types of caulk
  • 4. The two types of caulk are: Latex and Silicone
  • 5. The Differences Are: Silicone Latex  Use on wood, walls & other  Use on wet surfaces (around dry surfaces sinks, faucets, tubs)   Dries fast (2 hours) Mold & mildew resistant   Can be painted Won’t shrink or crack   Can be used to patch small Use on ceramic holes and gaps tile, glass, metal, plastic & wood  Flexible but can shrink  Not paintable
  • 6. Next  Be sure to follow package directions  Temperature and weather are important!  Clean area to be caulked  Remove dirt, grease and moisture  Remove old caulk
  • 7. Bead Size  The “bead” is the caulk that comes out of the tube  The size of the bead depends on the amount of caulk you need to fill the gap or hole  You can control the size of the bead by where you cut the nozzle on the tube of caulk
  • 8. Bead Size •The size of the bead depends on where you cut the nozzle. •The closer to the end the smaller the bead. •The further from the end the larger the amount of caulk.
  • 9. Loading the Caulk Gun  Push lever at end of gun and hold in place  At the same time pull metal bar back to allow room for caulk tube  You can now use nozzle (also called spout) cutter on the side of the caulk gun
  • 10. Push Lever Pull metal bar to allow room for cartridge.
  • 11. Ready to use The caulk gun is loaded and ready to go!
  • 12. Applying Caulk  Apply caulk to surface  Smooth using gloved finger  Try to avoid excess, use a small amount
  • 13. Before Note gap in corner of moulding
  • 15. Smooth it out!  Latex-use a damp sponge  Silicone use gloved finger  Be careful silicone is sticky
  • 16. Let Surface Dry  For Latex allow 2 hours to dry  For Silicone allow 24 hours to cure
  • 17. Congratulations!  By caulking your own projects you can:  Avoid costly repairs  Not have to rely on others to help you  Be empowered because you can to it yourself!
  • 18. You can do it! Give it a try!