introduction & types of paints

1. PAINTS
Presented by :
MD. Faizur Rahman
RJC302B43 (11305527)
Submitted to :
Vishal Kumar Poddar

2. INTRODUCTION
Paints is a covering or coating material.
It is prepared by mixing a BASE into vehicle
(carrier) along with a colouring PIGMENT

3. BASE
RED LEAD TITANIUM WHITE LEADZINC LEAD
PIGMENT

4. TYPES
 COALTAR PAINTS
 CELLULOSE PAINTS
 ALUMINIUM PAINTS
 ENAMELS PAINTS
 BITUMINOUS PAINTS
 OIL PAINTS
 WATER PAINTS
 PLASTIC PAINTS
 CEMENTS PAINTS
 EMULSION PAINTS

5. CEMENT PAINTS

6. INTRODUCTION
Cement paints are covered under powder paints which are
used for exterior cemented walls, all types of masonry
surfaces like Bungalows, Bridges, Dams,Houses, Buildings
of General Public, etc. and can also be used for Interior as
well as exterior masonry cemented surfaces.

7. HOW IS IT MADE ?
Cement Paint is a mixture of portland or white cement and lime with
additions of mineral extenders, accelerator and water repellant
substances.
White / portland cement 50-60%
Titanium Dioxide 10-15%
Calcium Chloride 2 - 5%
China Clay 10%

8.  Cement paint gives very good protection to all
kinds of masonry surfaces from Ultraviolet rays
present in sunrays
It gives very good protection from severe climatic
conditions like rain, heat, water, humidity, salt atmosphere
near sea-shores, to all types of cemented walls, surfaces.
It prevents growth of fungus and bacteria on masonry
surfaces.
USES

9. ENAMEL PAINT

10. INTRODUCTION
The paints having white lead or zinc white
ground in a small quantity of oil & mixed with
petroleum spirit & resinous matter. The term
of enamel paint that has hard, glossy &
opaque finish

11. APPLICATION
WOOD WORKPLASTERED SURFACEIRON & STEEL SURFACE

12. ADVANTAGES
Comes in container & ready to use
Tough durable & stain resistant
Can be applied both exterior & interior surfaces
Provides a glossy & smooth finish surface
DISADVANTAGE
Take a long time to dry

13. THANK YOU