![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 20, 2012
Name-Surname Pongsathorn Chumroenrattanakorn
Student ID. 53211820
Group Name Fueng
Engineering Team
Fam,Arm,Kwang,nook,Peak,Nueng,Art
Members
Product Design Team
Mo,Pup,Mint,pint
Members
Weekly Progress
At first, I would find out the data of coil. But I changed to use inductive Heating instead of Coil. So I search the
data of Inductive Heating as the below.
In a basic induction heating setup shown at right, a solid state RF power supply sends an AC current through an
inductor (often a copper coil), and the part to be heated (the workpiece) is placed inside the inductor. The inductor
serves as the transformer primary and the part to be heated becomes a short circuit secondary. When a metal part is
placed within the inductor and enters the magnetic field, circulating eddy currents are induced within the part.
As shown in diagram, these eddy currents flow
against the electrical resistivity of the metal, generating
precise and localized heat without any direct contact
between the part and the inductor. This heating occurs
with both magnetic and non-magnetic parts, and is often
referred to as the "Joule effect", referring to Joule's first
Figure 1. law – a scientific formula expressing the relationship
between heat produced by electrical current passed
through a conductor.
Engineering Analysis
Strong Point
- Inductive heating give the heat more than coil.
- It is saver energies than coil.
Week Point
- It conducts the heat only metal.
Next Week Job
- I will research the data for other part.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/53211820-120314014405-phpapp02/85/53211820-1-320.jpg)
Recomendados
Más contenido relacionado
Más de visavavit Phonthioua
Último
Último (20)
53211820
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 20, 2012 Name-Surname Pongsathorn Chumroenrattanakorn Student ID. 53211820 Group Name Fueng Engineering Team Fam,Arm,Kwang,nook,Peak,Nueng,Art Members Product Design Team Mo,Pup,Mint,pint Members Weekly Progress At first, I would find out the data of coil. But I changed to use inductive Heating instead of Coil. So I search the data of Inductive Heating as the below. In a basic induction heating setup shown at right, a solid state RF power supply sends an AC current through an inductor (often a copper coil), and the part to be heated (the workpiece) is placed inside the inductor. The inductor serves as the transformer primary and the part to be heated becomes a short circuit secondary. When a metal part is placed within the inductor and enters the magnetic field, circulating eddy currents are induced within the part. As shown in diagram, these eddy currents flow against the electrical resistivity of the metal, generating precise and localized heat without any direct contact between the part and the inductor. This heating occurs with both magnetic and non-magnetic parts, and is often referred to as the "Joule effect", referring to Joule's first Figure 1. law – a scientific formula expressing the relationship between heat produced by electrical current passed through a conductor. Engineering Analysis Strong Point - Inductive heating give the heat more than coil. - It is saver energies than coil. Week Point - It conducts the heat only metal. Next Week Job - I will research the data for other part. Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI