Cabinet Fire Protection For Data & Server Rooms

2. FireTecPro fastest possible fire detection FireTecPro fire safety for switch and server cabinets – ultra compact, with maximum protection

3. Small cause big consequences! FireTecPro rapid detection, where it is needed!

4. Fire in cabinets Causes: Overload Bad contacts defective parts FireTecPro rapid detection, where it is needed!

5. Survival duration of companies after total failure of IT systems 8% up to 1 day 43% up to max. 3 days 49% more than 3 days * source Debis (2006 FireTecPro rapid detection, where it is needed!

6. c Three fast steps to a better security! Fastest possible, highly sensitive smoke detection by semi aspiration and optional climate control. Power shutdown, extracts the source path for further enlargement. Extinguishing with gases that are not harmful to nature and equipment (FM200/NOVEC 1230) FireTecPro rapid detection, where it is needed!

8. Quick detection by aspiration

9. Simple Assembly

10. An “on top version possible for full cabinets

11. Ethernet networking opportunities via I-BOX ©,

12. Detection and extinguishing in a (2HE height 88, 9 mm)

13. Can be used in existing and new installations

14. Addable for multiple sensors.

15. Plug & Play FireTecPro rapid detection, where it is needed!

16. 1. 2 multi sensors 2. Emergency power supply 3. IP communication board (optional) 4. Emergency Power Shut Down Relays (optional) 5. Peripheralelectricalconnections 6. Adaptor for main power supply 7. Mainboard 8. LCD front panel display 9. Key switch 10. Emergency release button 11. Suction fan 12. Input main power supply 13. Extinguishing agent containers with electrically controlled release 14. Pressure display 15. Extinguishingnozzle Componenten

18. Designed to fit in cabinets of minimal 600 mm

19. Low gas pressure warning

20. 1st and 2nd stage fire alarm

21. LCD display shows status

22. User can make personal adjustments in the software by a simple program, shown on the LCD

23. Optional aspiration system is possible for areas with high airflow

24. FireTecPro can, in case of a fire incident, control and shut-down the power in the cabinet FireTecPro rapid detection, where it is needed!

26. The same capacities as FireTecPro 1.7 m³

27. For use in cabinets with a very high airflow FireTecPro rapid detection, where it is needed!

29. System takes air samples though the entire cabinet, which causes a faster response when the fire is at the bottom of the cabinet

30. For use in cabinets with a very high airflow

31. Permanent coincident alarm to exclude false alarms

32. Dust sensor combined with an optical smoke detector FireTecPro rapid detection, where it is needed!

34. Includes inputs to monitor the entire room

35. Shocks, temperature, humidity, airflow, access control (card readers), etc.

36. Monitors current on PDU

37. Non specific analogue and digital inputs

38. Real time condition, status and alarm monitoring FireTecPro rapid detection, where it is needed!

39. Suitable for the following cabinet dimensions 600mm x 600mm (+ Duo kast) 800mm x 800mm (+ Duo kast) 1000mm x 800mm (+ Duo kast) 1100mm x 800mm (+ Duo kast) 1200mm x 800mm (+ Duo kast) FireTecPro rapid detection, where it is needed!

46. Novec 1230 is capable of extinguishing fires classified as A, B, C, E and F, therefore it is more than fit for use in the FireTecPro FireTecPro, snelle detectie waar het nodig is!

47. Demonstration with NOVEC1230

48. FireTecPro ... your fire extinguished in a fraction of a second for any serious damage can occur. Safety at the heart of your operational systems. WWW.FIRETECPRO.COM