Gaeltecs CA-2 Adaptors are for checking multisensor extension leads and amplifiers.

1. CA-2 Adaptors
Gaeltecs CA-2 Adaptors are for checking multisensor extension leads and amplifiers.
Product Overview
If a system is not functioning it is not always clear which part of it needs attention. By
exchanging the transducer for this unit, simulated zero pressure and approximate calibrated
pressure steps can be presented to the system and the display checked for any errors.
© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment
Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com
Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU

2. This will identify the problem as either in the recording apparatus and cables or the transducer.
The unit can also be used to roughly set up the amplifier gain before calibrating the complete
system with a known pressure using the calibration tube.
The simulator can be supplied with 300mm Hg full scale (CA-2/300) or 150mm Hg full scale
(CA-2/150).
Where to Buy
The CA-2 Adaptor can be ordered direct through Gaeltec Devices Ltd or one of many approved
distributors Worldwide.
© 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment
Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com
Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU