2008 Packing Council Awards

1. National schools packaging design challenge By Zac van Leeuwestyn

3. Image Gallery Image 1 PUSH to > Image 2 PUSH to > Image 3 PUSH to > Image 4 PUSH to > Image 5 PUSH to > Image 6 PUSH to > Image 7 PUSH to > Image 8 PUSH to >

4. Click HERE to go back to image gallery

5. Click HERE to go back to image gallery

6. Click HERE to go back to image gallery

7. Click HERE to go back to image gallery

8. Click HERE to go back to image gallery

9. Click HERE to go back to image gallery

10. Click HERE to go back to image gallery

12. 3D Mock-up LAYOUT

13. 2D Mock-up LAYOUT

16. Rationale Questions C In order to test my package, I’ve used several methods and completed several tests. The first test I completed was filling the rubber container full with water and tested the strength of the superglue I used to attach the container to the base. It was a success 3 times in a row. The second test I used was having the trouble of the lid covering the whole base, I filled the container with water and tipped it sideways, as well as upside down. This was not a success. Changes had to be made to lower the lid and rails. I retried and was successful. the lid continuously to see if the lid was movable. It too was unsuccessful and holes had to be redrilled either end to ensure more/easier movement in the lid. In progression of the process I’ve ensured that when come in perfectly measured pieces it’s very easy to construct and therefore covers the confusion for marketing this item. The last test that occurred was sliding