a device that converts the chemical energy from a fuel into electricity through a chemical reaction with oxygen or another oxidizing agent - from MSE-HUST k54
TrustArc Webinar - Stay Ahead of US State Data Privacy Law Developments
Fuel cell
1. Seminar: Fuel cells
Class: Materials Science Engineering
Teacher : Phạ m Ngọ c Diệ u Quỳnh
Student: Hoàng Văn Tiế n
Hanoi 6-6-2012
2.
3. What is fuel cell ?
-A fuel cell is a device that converts the
chemical energy from a fuel into electricity
through a chemical reaction with oxygen or
another oxidizing agent.
-Fuels: +Hydrogen ( the most common fuel.)
+Hydrocarbons : natural gas,alcohols ..…..
-Air pollution emissions almost “equal zero”.
9. Electrochemical Aspects
-The standard free energy change of the fuel cell reaction is
indicated by the equation :
∆G = –nFE-
The value of ∆G corresponding :
*∆G= −229 kJ/mol,
*n = 2,
*F = 96500 C/g.mole electron,
⇒ E = 1.229 V.
The enthalpy change ∆H for a fuel cell reaction:
∆H = –nFEt
-Nernst equation :
E = E0+ (RT/2F) ln [PH2/PH2O] + (RT/2F) ln [PO2 1/2]
10. Thermodynamic Principles
-The maximum electrical work obtainable in a fuel cell
operating at constant temperature and pressure is
given by the change in the Gibbs free energy of the
electrochemical reaction:
W = ∆G = –nFE
-The difference between ∆G and ∆H is proportional to
the change in entropy ∆S:
∆G = ∆H – T∆S
11. The effect of temperature and pressure on
the cell potential:
− ∆V: change in volume,
∆S : entropy change,
E :cell poten-tial,
T:temperature,
P :reactant gas pressure,
n :the number of electrons transferred,
F: Faraday’s constant.
12. Fuel Cell Efficiency
the efficiency :
The ideal efficiency of a fuel cell operating
irreversibly:
The thermal efficiency of an ideal fuel cell operating
reversibly on pure hydrogen and oxygen at standard
conditions:
13. The thermal efficiency of the fuel cell ( in
terms of the actual cell voltage):
Based on the higher heating value of
hydrogen:
18. Other applications
Providing power for base stations or cell sites
Distributed generation
An uninterrupted power supply (UPS)
Base load power plants
Fuel cell APU for Refuse Collection Vehicle
Hybrid vehicles, pairing the fuel cell with either an ICE or a battery.
Notebook computers for applications where AC charging may not be
readily available.
Portable charging docks for small electronics (e.g. a belt clip that
charges your cell phones or PDA).
Smartphones, laptops and tablets.
Small heating appliances.
Fuel cells come in many varieties; however, they all work in the same general manner. They are made up of three adjacent segments: the anode , the electrolyte , and the cathode . Two chemical reactions occur at the interfaces of the three different segments. The net result of the two reactions is that fuel is consumed, water or carbon dioxide is created, and an electric current is created, which can be used to power electrical devices, normally referred to as the load. Lớp thứ nhất là điện cực nhiên liệu (cực dương), lớp thứ hai là chất điện phân dẫn ion và lớp thứ ba là điện cực khí ôxy (cực âm). Hai điện cực được làm bằng chất dẫn điện ( kim loại , than chì , ...). Chất điện phân được dùng là nhiều chất khác nhau tùy thuộc vào loại của tế bào nhiên liệu, có loại ở thể rắn , có loại ở thể lỏng và có cấu trúc màng . Vì một tế bào riêng lẻ chỉ tạo được một điện thế rất thấp cho nên tùy theo điện thế cần dùng nhiều tế bào riêng lẻ được nối kế tiếp vào nhau, tức là chồng lên nhau. Người ta thường gọi một lớp chồng lên nhau như vậy là stack. Ngoài ra, hệ thống đầy đủ cần có các thiết bị phụ trợ như máy nén, máy bơm, để cung cấp các khí đầu vào, máy trao đổi nhiệt, hệ thống kiểm tra các yêu cầu, sự chắc chắn của sự vận hành máy, hệ thống dự trữ và điều chế nhiên liệu.
The junction of dissimilar materials (n and p type silicon) creates a voltage Energy from sunlight knocks out electrons, creating a electron and a hole in the junction Connecting both sides to an external circuit causes current to flow Khi một photon chạm vào mảnh silic , một trong hai điều sau sẽ xảy ra: Photon truyền trực xuyên qua mảnh silic. Điều này thường xảy ra khi năng lượng của photon thấp hơn năng lượng đủ để đưa các hạt electron lên mức năng lượng cao hơn. Năng lượng của photon được hấp thụ bởi silic. Điều này thường xảy ra khi năng lượng của photon lớn hơn năng lượng để đưa electron lên mức năng lượng cao hơn.
Các proton mới được thành lập thấm qua màng điện phân polymer phía cực âm. Các electron di chuyển dọc theo bên ngoài mạch tải phía cực âm của MEA, do đó tạo ra hiện tại đầu ra của các tế bào nhiên liệu. Trong khi đó, một dòng khí oxy được chuyển giao cho phía cực âm của các MEA. Ở phía cathode các phân tử oxy phản ứng với các proton thấm nhuần thông qua màng polymer điện phân và electron đến thông qua các mạch điện bên ngoài để tạo thành phân tử nước The newly formed protons permeate through the polymer electrolyte membrane to the cathode side. The electrons travel along an external load circuit to the cathode side of the MEA, thus creating the current output of the fuel cell. Meanwhile, a stream of oxygen is delivered to the cathode side of the MEA. At the cathode side oxygen molecules react with the protons permeating through the polymer electrolyte membrane and the electrons arriving through the external circuit to form water molecules
The standard free energy change of the fuel cell reaction is indicated by the equation ∆ G = –nFE (2.2) Where ∆G is the free energy change, n is the number of moles of electrons in-volved, E is the reversible potential, and F is Faraday’s constant. If the reactants and the products are in their standard states, the equation can be represented as ∆ G0 = –nFE0 (2.3) The value of ∆G corresponding to (2.1) is −229 kJ/mol, n = 2, F = 96500 C/g.mole electron, and hence the calculated value of E is 1.229 V. The enthalpy change ∆H for a fuel cell reaction indicates the entire heat re-leased by the reaction at constant pressure. The fuel cell potential in accordance with ∆H is defined as the thermo-neutral potential, Et, ∆ H = –nFEt (2.4) where Et has a value of 1.48 VThe standard free energy change of the fuel cell reaction is indicated by the equation ∆ G = –nFE (2.2) Where ∆G is the free energy change, n is the number of moles of electrons in-volved, E is the reversible potential, and F is Faraday’s constant. If the reactants and the products are in their standard states, the equation can be represented as ∆ G0 = –nFE0 (2.3) The value of ∆G corresponding to (2.1) is −229 kJ/mol, n = 2, F = 96500 C/g.mole electron, and hence the calculated value of E is 1.229 V. The enthalpy change ∆H for a fuel cell reaction indicates the entire heat re-leased by the reaction at constant pressure. The fuel cell potential in accordance with ∆H is defined as the thermo-neutral potential, Et, ∆ H = –nFEt (2.4) where Et has a value of 1.48 V
Type 212 submarine with fuel cell propulsion of the German Navy in dry dock