Enviar búsqueda
Cargar
Automatic gear transmission in two wheelers using embedded system
•
12 recomendaciones
•
19,290 vistas
I
iaemedu
Seguir
Denunciar
Compartir
Denunciar
Compartir
1 de 12
Descargar ahora
Descargar para leer sin conexión
Recomendados
Automatic-gear-shift-mechanism
Automatic-gear-shift-mechanism
veeresh844
Railway Accident Avoiding System: A Safety Measure
Railway Accident Avoiding System: A Safety Measure
Yantralive Parts Technology Pvt. Ltd
Automatic Train Collision and Accidence Avoidance system
Automatic Train Collision and Accidence Avoidance system
PradeepRaj
Electronic Control Unit(ECU)
Electronic Control Unit(ECU)
Ankul Gupta
Drive By Wire Technology
Drive By Wire Technology
Euroautomotive
Híbrido Toyota
Híbrido Toyota
Angel Unda Ing Espana
Future vehicles
Future vehicles
Omar Qasim
Adaptive cruise control system by NIKHIL R
Adaptive cruise control system by NIKHIL R
Nikhil Kashyap
Recomendados
Automatic-gear-shift-mechanism
Automatic-gear-shift-mechanism
veeresh844
Railway Accident Avoiding System: A Safety Measure
Railway Accident Avoiding System: A Safety Measure
Yantralive Parts Technology Pvt. Ltd
Automatic Train Collision and Accidence Avoidance system
Automatic Train Collision and Accidence Avoidance system
PradeepRaj
Electronic Control Unit(ECU)
Electronic Control Unit(ECU)
Ankul Gupta
Drive By Wire Technology
Drive By Wire Technology
Euroautomotive
Híbrido Toyota
Híbrido Toyota
Angel Unda Ing Espana
Future vehicles
Future vehicles
Omar Qasim
Adaptive cruise control system by NIKHIL R
Adaptive cruise control system by NIKHIL R
Nikhil Kashyap
Automotive Electronics In Automobile | Electronic control unit
Automotive Electronics In Automobile | Electronic control unit
jignesh parmar
Drive by wire technology
Drive by wire technology
Ayush Srivastava
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Praneel Chand
Automatic emergency braking
Automatic emergency braking
LADR19ME091ADARSHS
Automatic transmission in automobiles
Automatic transmission in automobiles
vpraveenvijayakumar
Automobile safety system
Automobile safety system
Bishal Singh
Anti-lock Braking System (ABS)
Anti-lock Braking System (ABS)
haitham shehata
Car crash testing
Car crash testing
Kumar Manikantan T
Engine control module
Engine control module
Victor Murray
Automatic Braking System
Automatic Braking System
Hassan Raza
Automatic Emergency Braking
Automatic Emergency Braking
mani kanta
Regenerative Braking System ppt
Regenerative Braking System ppt
MD ASLAM HUSSAIN
Speed sensor
Speed sensor
adjkfnadjkfn
automatic braking system and brake actuation before collison
automatic braking system and brake actuation before collison
ashutosh singh
A seminar report on hybrid electric vehicle
A seminar report on hybrid electric vehicle
007skpk
Fuel Cell Vehicle
Fuel Cell Vehicle
Stuttgart Automobile Service
Four Wheel Steering System.
Four Wheel Steering System.
mudassir khan
Automatic gear chaning system in two wheeler
Automatic gear chaning system in two wheeler
Md Firdous alam
AUTO PILOT TECHNOLOGY IN VEHICLES
AUTO PILOT TECHNOLOGY IN VEHICLES
nithishreddy1999
Electrical car ppt
Electrical car ppt
Shyam Sundar Roy
Automatic transmission system ppt
Automatic transmission system ppt
PEC University Chandigarh
Automatic gear transmission
Automatic gear transmission
New Horizon Collage of Engineering
Más contenido relacionado
La actualidad más candente
Automotive Electronics In Automobile | Electronic control unit
Automotive Electronics In Automobile | Electronic control unit
jignesh parmar
Drive by wire technology
Drive by wire technology
Ayush Srivastava
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Praneel Chand
Automatic emergency braking
Automatic emergency braking
LADR19ME091ADARSHS
Automatic transmission in automobiles
Automatic transmission in automobiles
vpraveenvijayakumar
Automobile safety system
Automobile safety system
Bishal Singh
Anti-lock Braking System (ABS)
Anti-lock Braking System (ABS)
haitham shehata
Car crash testing
Car crash testing
Kumar Manikantan T
Engine control module
Engine control module
Victor Murray
Automatic Braking System
Automatic Braking System
Hassan Raza
Automatic Emergency Braking
Automatic Emergency Braking
mani kanta
Regenerative Braking System ppt
Regenerative Braking System ppt
MD ASLAM HUSSAIN
Speed sensor
Speed sensor
adjkfnadjkfn
automatic braking system and brake actuation before collison
automatic braking system and brake actuation before collison
ashutosh singh
A seminar report on hybrid electric vehicle
A seminar report on hybrid electric vehicle
007skpk
Fuel Cell Vehicle
Fuel Cell Vehicle
Stuttgart Automobile Service
Four Wheel Steering System.
Four Wheel Steering System.
mudassir khan
Automatic gear chaning system in two wheeler
Automatic gear chaning system in two wheeler
Md Firdous alam
AUTO PILOT TECHNOLOGY IN VEHICLES
AUTO PILOT TECHNOLOGY IN VEHICLES
nithishreddy1999
Electrical car ppt
Electrical car ppt
Shyam Sundar Roy
La actualidad más candente
(20)
Automotive Electronics In Automobile | Electronic control unit
Automotive Electronics In Automobile | Electronic control unit
Drive by wire technology
Drive by wire technology
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Introduction to Vehicle Electronic Systems and Fault Diagnosis
Automatic emergency braking
Automatic emergency braking
Automatic transmission in automobiles
Automatic transmission in automobiles
Automobile safety system
Automobile safety system
Anti-lock Braking System (ABS)
Anti-lock Braking System (ABS)
Car crash testing
Car crash testing
Engine control module
Engine control module
Automatic Braking System
Automatic Braking System
Automatic Emergency Braking
Automatic Emergency Braking
Regenerative Braking System ppt
Regenerative Braking System ppt
Speed sensor
Speed sensor
automatic braking system and brake actuation before collison
automatic braking system and brake actuation before collison
A seminar report on hybrid electric vehicle
A seminar report on hybrid electric vehicle
Fuel Cell Vehicle
Fuel Cell Vehicle
Four Wheel Steering System.
Four Wheel Steering System.
Automatic gear chaning system in two wheeler
Automatic gear chaning system in two wheeler
AUTO PILOT TECHNOLOGY IN VEHICLES
AUTO PILOT TECHNOLOGY IN VEHICLES
Electrical car ppt
Electrical car ppt
Destacado
Automatic transmission system ppt
Automatic transmission system ppt
PEC University Chandigarh
Automatic gear transmission
Automatic gear transmission
New Horizon Collage of Engineering
Automatic pneumatic bumper synopsis
Automatic pneumatic bumper synopsis
yogesh_17
Manual transmission
Manual transmission
ptchuang
Mechanical projects
Mechanical projects
Abi Nesan
Resume
Resume
mahesh jidagi
5 hp19e
5 hp19e
José Carlos Bryk
Automatic transmission in mercedes
Automatic transmission in mercedes
John Michel
Tech transfer making it as a risk free approach in pharmaceutical and biotech in
Tech transfer making it as a risk free approach in pharmaceutical and biotech in
iaemedu
Design and Fabrication of Automatic Main Stand For Two-Wheelers
Design and Fabrication of Automatic Main Stand For Two-Wheelers
IJSRD
Et0071 fabrication of pneumatic drill jig
Et0071 fabrication of pneumatic drill jig
Ecway Technologies
09ME64
09ME64
Akash Vyas
Organizational structure of HRTC
Organizational structure of HRTC
JazzSodhi
Automatic sidestand
Automatic sidestand
Siva Prasanth
Engine overheating and alam
Engine overheating and alam
ecwayerode
Automatic Transmission
Automatic Transmission
Deepa Ram Suthar
Breake failure indicator for four wheelers
Breake failure indicator for four wheelers
Logic Mind Technologies
List channelpartners sp_jnnsm(19022013)
List channelpartners sp_jnnsm(19022013)
madhavanvee
Gear motors
Gear motors
SACHIN CHATURVEDI
himachal road transport corporation by sanjeev
himachal road transport corporation by sanjeev
Sanjeev Kumar
Destacado
(20)
Automatic transmission system ppt
Automatic transmission system ppt
Automatic gear transmission
Automatic gear transmission
Automatic pneumatic bumper synopsis
Automatic pneumatic bumper synopsis
Manual transmission
Manual transmission
Mechanical projects
Mechanical projects
Resume
Resume
5 hp19e
5 hp19e
Automatic transmission in mercedes
Automatic transmission in mercedes
Tech transfer making it as a risk free approach in pharmaceutical and biotech in
Tech transfer making it as a risk free approach in pharmaceutical and biotech in
Design and Fabrication of Automatic Main Stand For Two-Wheelers
Design and Fabrication of Automatic Main Stand For Two-Wheelers
Et0071 fabrication of pneumatic drill jig
Et0071 fabrication of pneumatic drill jig
09ME64
09ME64
Organizational structure of HRTC
Organizational structure of HRTC
Automatic sidestand
Automatic sidestand
Engine overheating and alam
Engine overheating and alam
Automatic Transmission
Automatic Transmission
Breake failure indicator for four wheelers
Breake failure indicator for four wheelers
List channelpartners sp_jnnsm(19022013)
List channelpartners sp_jnnsm(19022013)
Gear motors
Gear motors
himachal road transport corporation by sanjeev
himachal road transport corporation by sanjeev
Similar a Automatic gear transmission in two wheelers using embedded system
IRJET- Intelligent Braking System for Automobiles
IRJET- Intelligent Braking System for Automobiles
IRJET Journal
“FUEL EFFICIENT TWO WHEELERS USING MICRO-HYBRID TECHNOLOGY& SMART EMBEDDED SY...
“FUEL EFFICIENT TWO WHEELERS USING MICRO-HYBRID TECHNOLOGY& SMART EMBEDDED SY...
International Journal of Technical Research & Application
INTELLIGENT BRAKING SYSTEM
INTELLIGENT BRAKING SYSTEM
IRJET Journal
IRJET- Multilevel Object Sorting System using PLC Controller
IRJET- Multilevel Object Sorting System using PLC Controller
IRJET Journal
6.atomatic clutch and breking system 2
6.atomatic clutch and breking system 2
Sathis Kumar
Project report-intelligent-breaking-system-
Project report-intelligent-breaking-system-
Pramodass C
IRJET- Smart Digi Train
IRJET- Smart Digi Train
IRJET Journal
Automatic Car Parking System Using PLC
Automatic Car Parking System Using PLC
IRJET Journal
IRJET- Design and Development of Anti Accident Braking System
IRJET- Design and Development of Anti Accident Braking System
IRJET Journal
IRJET- Study of Audible Identification Alert System for Rash Driving
IRJET- Study of Audible Identification Alert System for Rash Driving
IRJET Journal
IRJET- Smart Braking System using Ultrasonic Sensor and Actuator
IRJET- Smart Braking System using Ultrasonic Sensor and Actuator
IRJET Journal
Multi-Tasking Auto Cleaner
Multi-Tasking Auto Cleaner
IRJET Journal
Gesture control wheel chair cum stretcher
Gesture control wheel chair cum stretcher
IRJET Journal
Design and Implementation of a Self-Balancing Two-Wheeled Robot Driven by a F...
Design and Implementation of a Self-Balancing Two-Wheeled Robot Driven by a F...
IRJET Journal
IRJET- Smart Digi Train
IRJET- Smart Digi Train
IRJET Journal
IRJET - Construction of "One Belt and One Road" Intelligent Analysis System
IRJET - Construction of "One Belt and One Road" Intelligent Analysis System
IRJET Journal
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION
IAEME Publication
Mechatronic system based manual transmission
Mechatronic system based manual transmission
IAEME Publication
Automatic clutch & braking system
Automatic clutch & braking system
Ecway Technologies
Automatic clutch & braking system
Automatic clutch & braking system
Ecwaytechnoz
Similar a Automatic gear transmission in two wheelers using embedded system
(20)
IRJET- Intelligent Braking System for Automobiles
IRJET- Intelligent Braking System for Automobiles
“FUEL EFFICIENT TWO WHEELERS USING MICRO-HYBRID TECHNOLOGY& SMART EMBEDDED SY...
“FUEL EFFICIENT TWO WHEELERS USING MICRO-HYBRID TECHNOLOGY& SMART EMBEDDED SY...
INTELLIGENT BRAKING SYSTEM
INTELLIGENT BRAKING SYSTEM
IRJET- Multilevel Object Sorting System using PLC Controller
IRJET- Multilevel Object Sorting System using PLC Controller
6.atomatic clutch and breking system 2
6.atomatic clutch and breking system 2
Project report-intelligent-breaking-system-
Project report-intelligent-breaking-system-
IRJET- Smart Digi Train
IRJET- Smart Digi Train
Automatic Car Parking System Using PLC
Automatic Car Parking System Using PLC
IRJET- Design and Development of Anti Accident Braking System
IRJET- Design and Development of Anti Accident Braking System
IRJET- Study of Audible Identification Alert System for Rash Driving
IRJET- Study of Audible Identification Alert System for Rash Driving
IRJET- Smart Braking System using Ultrasonic Sensor and Actuator
IRJET- Smart Braking System using Ultrasonic Sensor and Actuator
Multi-Tasking Auto Cleaner
Multi-Tasking Auto Cleaner
Gesture control wheel chair cum stretcher
Gesture control wheel chair cum stretcher
Design and Implementation of a Self-Balancing Two-Wheeled Robot Driven by a F...
Design and Implementation of a Self-Balancing Two-Wheeled Robot Driven by a F...
IRJET- Smart Digi Train
IRJET- Smart Digi Train
IRJET - Construction of "One Belt and One Road" Intelligent Analysis System
IRJET - Construction of "One Belt and One Road" Intelligent Analysis System
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION
Mechatronic system based manual transmission
Mechatronic system based manual transmission
Automatic clutch & braking system
Automatic clutch & braking system
Automatic clutch & braking system
Automatic clutch & braking system
Más de iaemedu
Integration of feature sets with machine learning techniques
Integration of feature sets with machine learning techniques
iaemedu
Effective broadcasting in mobile ad hoc networks using grid
Effective broadcasting in mobile ad hoc networks using grid
iaemedu
Effect of scenario environment on the performance of mane ts routing
Effect of scenario environment on the performance of mane ts routing
iaemedu
Adaptive job scheduling with load balancing for workflow application
Adaptive job scheduling with load balancing for workflow application
iaemedu
Survey on transaction reordering
Survey on transaction reordering
iaemedu
Semantic web services and its challenges
Semantic web services and its challenges
iaemedu
Website based patent information searching mechanism
Website based patent information searching mechanism
iaemedu
Revisiting the experiment on detecting of replay and message modification
Revisiting the experiment on detecting of replay and message modification
iaemedu
Prediction of customer behavior using cma
Prediction of customer behavior using cma
iaemedu
Performance analysis of manet routing protocol in presence
Performance analysis of manet routing protocol in presence
iaemedu
Performance measurement of different requirements engineering
Performance measurement of different requirements engineering
iaemedu
Mobile safety systems for automobiles
Mobile safety systems for automobiles
iaemedu
Efficient text compression using special character replacement
Efficient text compression using special character replacement
iaemedu
Agile programming a new approach
Agile programming a new approach
iaemedu
Adaptive load balancing techniques in global scale grid environment
Adaptive load balancing techniques in global scale grid environment
iaemedu
A survey on the performance of job scheduling in workflow application
A survey on the performance of job scheduling in workflow application
iaemedu
A survey of mitigating routing misbehavior in mobile ad hoc networks
A survey of mitigating routing misbehavior in mobile ad hoc networks
iaemedu
A novel approach for satellite imagery storage by classify
A novel approach for satellite imagery storage by classify
iaemedu
A self recovery approach using halftone images for medical imagery
A self recovery approach using halftone images for medical imagery
iaemedu
A comprehensive study of non blocking joining technique
A comprehensive study of non blocking joining technique
iaemedu
Más de iaemedu
(20)
Integration of feature sets with machine learning techniques
Integration of feature sets with machine learning techniques
Effective broadcasting in mobile ad hoc networks using grid
Effective broadcasting in mobile ad hoc networks using grid
Effect of scenario environment on the performance of mane ts routing
Effect of scenario environment on the performance of mane ts routing
Adaptive job scheduling with load balancing for workflow application
Adaptive job scheduling with load balancing for workflow application
Survey on transaction reordering
Survey on transaction reordering
Semantic web services and its challenges
Semantic web services and its challenges
Website based patent information searching mechanism
Website based patent information searching mechanism
Revisiting the experiment on detecting of replay and message modification
Revisiting the experiment on detecting of replay and message modification
Prediction of customer behavior using cma
Prediction of customer behavior using cma
Performance analysis of manet routing protocol in presence
Performance analysis of manet routing protocol in presence
Performance measurement of different requirements engineering
Performance measurement of different requirements engineering
Mobile safety systems for automobiles
Mobile safety systems for automobiles
Efficient text compression using special character replacement
Efficient text compression using special character replacement
Agile programming a new approach
Agile programming a new approach
Adaptive load balancing techniques in global scale grid environment
Adaptive load balancing techniques in global scale grid environment
A survey on the performance of job scheduling in workflow application
A survey on the performance of job scheduling in workflow application
A survey of mitigating routing misbehavior in mobile ad hoc networks
A survey of mitigating routing misbehavior in mobile ad hoc networks
A novel approach for satellite imagery storage by classify
A novel approach for satellite imagery storage by classify
A self recovery approach using halftone images for medical imagery
A self recovery approach using halftone images for medical imagery
A comprehensive study of non blocking joining technique
A comprehensive study of non blocking joining technique
Automatic gear transmission in two wheelers using embedded system
1.
INTERNATIONAL JOURNAL OF
ADVANCED RESEARCH IN International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN ENGINEERING AND 3, Number 2, July-December (2012), © IAEME 0976 – 6499(Online) Volume TECHNOLOGY (IJARET) ISSN 0976 - 6480 (Print) ISSN 0976 - 6499 (Online) Volume 3, Issue 2, July-December (2012), pp. 164-175 IJARET © IAEME: www.iaeme.com/ijaret.asp Journal Impact Factor (2012): 2.7078 (Calculated by GISI) ©IAEME www.jifactor.com AUTOMATIC GEAR TRANSMISSION IN TWO WHEELERS USING EMBEDDED SYSTEM P. Alexander M.E.1, T. Sudha M.E.2, M. Omamageswari M.E.3 1 (Department of Instrumentation & Control Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India, aim4high@gmail.com) 2 (Department of Instrumentation & Control Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India, t.sudhavelu@gmail.com) 3 (Department of Instrumentation & Control Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India, omamagi@yahoo.com) ABSTRACT In this study, a gear shifting mechanism was designed and applied on an auto clutch featured bike to make the gear transmission process faster and less destructible for the diver using Embedded System design. The present automatic transmission is fully mechanically controlled and costs very high and it is not suitable for small displacement engines. But the gear transmission mechanism designed makes driving easier and to achieve efficient driving. This new device must be reliable, has small dimensions, economical and low maintenance cost. This project aims to improve the gear shifting process with a suitable control mechanism to implement in clutch featured bikes. According to the suggested gear shifting method, the microcontroller selects the transmission gear as per the speed of the vehicle without any human interference. The head light control is designed which dims and dips if any vehicles comes opposite with high beam. This is a safety feature installed to avoid accidents caused due to high beam lights having blinding effect on drivers coming from the opposite direction. Keywords: Automatic gear transmission, automatic headlight control, Digital speedometer, Inductive proximity sensor, Microcontroller AT89s51. 1. INTRODUCTION 1.1 Overview The topic of current interest in the area of controller development for automatic transmissions with a finite number of gearshifts which transmits the gears automatically with respect to speed. Gearshifts in automatic transmissions involve a change in the power flow path through the transmission. Advantages of these automatic transmissions include simplicity of 164
2.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME mechanical design and savings in transmission weight and size, which are beneficial in terms of fuel economy and production costs. This enables gain in fuel economy while meeting drivability and performance goals, these savings become more significant. The designed automatic transmission is done in an auto-clutch featured bike which can be applied effectively and efficiently in a clutch featured bikes with suitable control techniques. The ultimate goal of our project is to transmit the gears without the human interference and to attain efficient, safe and easy driving in cost effective way. Microcontroller is the heart of the system which handles all the sub devices connected across it. We have used Atmel 89s52 microcontroller. 1.2 Automation Automation is the use of control system to control a process replacing the human operators. It is a step beyond mechanization, where human operators are provided with the physical requirements of work. Automation is now often applied primarily to reduce the human effort thereby to attain desired operation. Another major shift in automation is the increased emphasis on flexibility and convertibility in different process. One safety issue with automation is that it is often viewed as a way to minimize human error in the system, increasing the degree and the levels of automation also increase the sequence of error that accidently created in automated systems. Different types of automation tools that exist in today’s environment are Programmable logic controller, Microcontroller, SCADA, etc. 1.3 Types of Transmission Manual transmission Automatic transmission 1.3.1 Manual Transmission A manual transmission or sequential type is a type of transmission used on motorcycles and cars, where gears are selected in order, and direct access to specific gears is not possible. With traditional manual transmissions, the driver can move from gear to gear, by moving the shifter to the appropriate position. A clutch must be disengaged before the new gear is selected, to disengage the running engine from the transmission, thus stopping all torque transfer. 1.3.2 Automatic Transmission An automatic transmission is one type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually and to achieve efficient driving. 1.3.3 Advantages of Automatic Transmission • Easier to drive in stop-and-go traffic and available in most cars, an automatic transmission has definite benefits • The main benefit of automatic transmissions is that they are simply easier to use. • Fuel efficient. 1.4 Embedded System All embedded system uses either a microprocessor (or) microcontroller. The software for the embedded system is called firmware. The firmware will be written in assembly language (or) using higher level languages life ‘C’ (or) ‘Embedded C’. The software will be simulated using micro code simulation for the target processor. Since they are supposed to perform only specific tasks, the programs are stored in ROM. 165
3.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME An embedded system is some combination of computer hardware and software, either fixed in capability or programmable, that is specifically designed for a particular function. Industrial machines, automobiles, medical equipment, cameras, household appliances, airplanes, vending machines and toys (as well as the more obvious cellular phone and PDA) are among the myriad possible hosts of an embedded system. Embedded systems that are programmable are provided with programming interfaces, and embedded system programming is a specialized occupation. An Embedded system is a special-purpose computer system, which is completely encapsulated by the device controls. It has specific requirements and performs pre-defined tasks, unlike a general purpose personal computer. Avoids lots of Electronic components. Build in with rich features. Probability of failure is reduced. Easy interface. 1.5 Block Diagram Description The presented project is aimed to perform operations such as automatic gear transmission, automatic headlight control, and digital speedometer. Here the speed is the inputs to the microcontroller unit. The inductive speed sensor senses the speed of the vehicle from the front wheel and sends train of pulses as output to the microcontroller unit. The microcontroller unit checks the pulses for sample time period and calculates the speed of the vehicle. As programmed, the microcontroller actuates the Relay 1 and Relay 2 through the driver unit depending on the speed of the vehicle. The DC motor function is to transmit the gear lever by pole reversal technique which is performed using the relays. Since it requires slowing down the engine at the time of gear transmission, the supply to the ignition coil is grounded so as to slow the engine. Fig.1: Block Diagram of Automatic gear transmission in Two Wheelers Using Embedded System 166
4.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME 2. HARDWARE DESCRIPTION 2.1 Inductive Speed Sensor Inductive proximity sensors are designed to operate by generating an electromagnetic field and detecting the eddy current losses when a ferrous metal target enters the field. The sensor consists of a ferrite core, an oscillator, a trigger-signal level detector and an output circuit. The oscillator creates a high frequency field radiating from the coil in front of the sensor centered on the axis of the coil. When a metal object enters the high-frequency field, eddy currents are induced on the surface of the target. As a metal object advances into the field, eddy currents are induced in the target. This results in a loss of energy in the oscillator circuit and consequently smaller amplitude of oscillation. Fig. 2: Inductive proximity pickup The detector circuit recognizes a specific change in amplitude and generates a signal which will turn the solid state-output “ON” or “OFF”. When the metal object leaves the sensing area, the oscillator regenerates allowing the sensor to return to its normal state. The inductive speed sensor has a built-in hysteresis to avoid unwanted switching of the sensor due to, • Mechanical vibration of the sensor or the gear wheel • Electrical interference • Circuit oscillation at very low rotational speed Fig.3: Sensor mounting A larger hysteresis provides a better immunity to disturbances but, on the other hand, reduces the maximum sensing distance d, as the sensor signal must exceed the hysteresis levels to be recognized. 2.2 Microcontroller Microcontrollers are microprocessors with peripheral devices and memory embedded in a single chip. They are used in almost all modern day appliances controllers and so it is produced in millions. The most popular microcontroller architecture is Atmel 89s52. There are many 167
5.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME number of IC manufacturers offering microcontrollers based on this architecture. Atmel is one of them. The microcontroller 89s52 from Atmel is chosen for this project. 2.2.1 AT89S52 The AT89s52 is a low-power, high-performance CMOS 8-bit microcomputer with 8K bytes of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry standard 80C51 and 80C52 instruction set and pin out. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89s52 is a powerful microcomputer which provides a highly-flexible and cost-effective solution to many embedded control applications. Features • 8K Bytes of In-System Reprogrammable Flash Memory • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes 2.2.2 Oscillator Characteristics XTAL1 and XTAL2 are the input and output, respectively, of an inverting amplifier that can be configured for use as an on-chip oscillator, as shown in Fig.4. Either a quartz crystal or ceramic resonator may be used. To drive the device from an external clock source, XTAL2 should be left unconnected while XTAL1 is driven, as shown in the figure. There are no requirements on the duty cycle of the external clock signal, since the input to the internal clocking circuitry is through a divide-by-two flip-flop, but minimum and maximum voltage high and low time specifications must be observed. Fig.4: Oscillator connection 2.3 Liquid Crystal Display (LCD) A liquid crystal display (LCD) is a flat panel display, electronic visual display, or video display that uses the light modulating properties of liquid crystals (LCs). LCDs do not emit light directly. The LCD display used in this project is 16*2 type LCD display it consists of 14 pins. 168
6.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME 2.4 Relay Driver Unit Relays are devices which allow low power circuits to switch a relatively high current and voltage ON/OFF. For a relay to operate a suitable pull-in and holding current should be passed through its coil. Generally relay coils are designed to operate from a particular voltage at 5V or 12V. Fig.5: Relay Driver Unit The fig.5 shows the basic relay driver circuit. The NPN transistor BC547 is used to control the relay. The transistor is driven into saturation (turned ON) when logic 1 is written on the port pin thus turning ON the relay. The relay is turned OFF by writing logic 0 on the port pin. A diode is connected across the relay coil to protect the transistor damage due to back EMF generated in the relays inductive coil when the transistor is turned OFF. The LED is used to indicate that the relay is turned ON or OFF. 2.5 Relays Relays come in various configurations for their switch contacts, as well as different DC voltages for to operate their coil. They may be as simple as an on/off switch or as complex as integrating several switches into one unit. In a "double-pole" configuration, one switch terminal toggles between two different output terminals. Regardless of the configuration, each switch on a relay can be "normally open" (NO) or "normally closed" (NC); that is, when the coil is at rest and not energized, the switch contacts are NO or NC. In an open circuit, no current flows, similar to a wall light switch in the "Off" position. In a closed circuit, metal switch contacts touch each other to complete a circuit, and current flows, similar to turning a light switch to the "On" position. In the accompanying schematic diagram, points A and B connect to the coil. Points C and D connect to the switch. Voltage applied across the coil at points A and B creates an electromagnetic field that attracts a lever in the switch, causing it to make or break contact in the circuit at points C and D (depending if the design is NO or NC). The switch contacts remain in this state until the voltage to the coil is removed. Rated load : 12-28VDC Coil resistance : <=100m ohms Coil rated voltage : 3-24VDC 169
7.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME 2.6 DC Motor The DC motor has two basic parts: the rotating part that is called the armature and the stationary part that includes coils of wire called the field coils. The stationary part is also called the stator. The armature is made of coils of wire wrapped around the core, and the core has an extended shaft that rotates on bearings. The ends of each coil of wire on the armature are terminated at one end of the armature. The termination points are called the commutator, and this is where the brushes make electrical contact to bring electrical current from the stationary part to the rotating part of the machine. The stator coils will be referred to as field coils they are connected in series or parallel with each other to create changes of torque in the motor. 2.7 Photo Detectors The MRD500 photodiode used is a p-intrinsic-n (PIN) silicon diode operated in reverse bias. The very thin p-type conducting layer acts as a window to admit light into the crystal. The reverse bias voltage maintains a strong electric field throughout the intrinsic region forming an extended depletion layer. The depletion layer should be thicker than the absorption length for photons in silicon in order to maximize the efficiency. Any incident photon whose energy exceeds the band-gap energy is absorbed to produce an electron-hole pair by photoelectric excitation of a valence electron into the conduction band. The charge carriers are swept out of the crystal by the internal electric field to appear as a photocurrent at the terminals. The photocurrent is proportional to the rate at which light is entering the diode. +V D1 MR500 V signal R1 10k Fig.6: Photo Detector Circuit 2.8 Power Supply Unit Voltage regulator 7805 Microcontroller board To DC 12V 7Ah motor and Battery relays Fig.7: Block diagram of power supply unit The 7805 is a family of self-contained fixed linear voltage regulator integrated circuits .The 78xx family is commonly used in electronic circuits requiring a regulated power supply due to their ease-of-use and low cost. For ICs within the family, the xx is replaced with two digits, indicating the output voltage (for example, the 7805 has a 5 volt output, while the 7812 produces 12 volts). The 78xx 170
8.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME lines are positive voltage regulators: they produce a voltage that is positive relative to a common ground. There is a related line of 79xx devices which are complementary negative voltage regulators. 78xx and 79xx ICs can be used in combination to provide positive and negative supply voltages in the same circuit. These devices support an input voltage anywhere from a couple of volts over the intended output voltage, up to a maximum of 35 or 40 volts, and typically provide 1 or 1.5 amperes of current (though smaller or larger packages may have a lower or higher current rating). 3. HARDWARE IMPLEMENTATION 3.1 Overall Circuit Fig.9: Overall circuit 171
9.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME 3.2 Pin connection P2.7 - Inductive proximity sensor P2.2 - To Relay 1 (upward gear shifting) P2.3 - To Relay 2 (downward gear shifting) P2.4 - To Relay 3 (ignition cut off relay) P3.4 - Enable (LCD command word) P3.5 - To select data/command register (LCD command word) P1.0 - D0 (LCD data line) P1.1 - D1 (LCD data line) P1.2 - D2 (LCD data line) P1.3 - D3 (LCD data line) P1.4 - D4 (LCD data line) P1.5 - D5 (LCD data line) P1.6 - D6 (LCD data line) P1.7 - D7 (LCD data line) 3.2 DC Motor Connections Fig.10: DC motor connections Relay specification: Relays 1 and 2 – 12V, 25A Relays 3 and 4 – 12V, 5A To run the DC motor in both directions to shift the gear up and down pole reversing technique is adopted. Here relays 1 and 2 are connected to the DC motor and the relays 3 and 4 operate the relays 1 and 2 through the microcontroller respectively. When relay 3 is energized through the microcontroller units relay 1 is energized and thus the motor runs in anticlockwise direction and shifts the gear upwards and when the relay 4 is energized opposite action takes place and shifts the gear downwards. 172
10.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME 3.3 Photo Detector Circuit MR500 is used as a sensor to detect the light intensity which is silicon photodiode. This photodiode operates under an oscillator with frequency of 2 KHz correspondingly current is obtained as output which is proportional to the intensity of the light. A current to voltage amplifier is used with input current from the photodiode is applied to the inverting terminal of the amplifier. Fig.11: Photo detector circuit The output of the current to voltage amplifier is connected to the relay through the relay driver unit which operates the functionality of the headlight. 3.4 Project Snapshots Fig.12: Microcontroller board 173
11.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME Fig.13: DC motor mounting Fig. 14: Inductive speed sensor mounting 4. RESULTS ANALYSIS The Inductive speed sensor output pulses decide the output of the system. The sensor produces pulses when it crosses the metal target fixed in the wheel. The sets of gear pattern is decided by the pulses obtained from the sensor and they are tabulated below, 174
12.
International Journal of
Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 3, Number 2, July-December (2012), © IAEME Table 1: Obtained Output Sensor pulses Speed (Km/hr) Gear position 1 Less than 5 Gear 1 2 5 Gear 2 3 15 5 20 Gear 3 7 25 9 30 11 35 13 40 Gear 4 15 45 17 50 5. CONCLUSION The project presented has involved the development and implementation of automatic transmissions for bikes. The motivation of this work is to implement this idea in clutch featured bikes with a suitable clutch control. The automatic transmission can be also used in 5 and 6 speed versions by altering few changes in the program. According to the achieved results the mechanism done is reliable if it is installed in bikes. Using the simplest microcontroller and the required hardware enables to convert the old traditional semi automatic gear transmission mechanism to a fully automated one. The application of this mechanism leads to make the driving process easier and fuel efficient driving can be achieved. REFERENCES [1] J-O Hahn1, J-W Hur, G-W Choi, Y M Cho and K I Lee. Department of Mechanical Engineering, Korea Airforce Academy, South Korea.:”Self-learning approach to automatic transmission shift control in a commercial construction vehicle during the inertia phase”. [2] Zhenyu Zhu, Chunxin Xu, College of Mechanical Science and Engineering,Jilin University, Changchun, Jilin 130025, China.:”Experimental Study on Intelligent Gear- Shifting Control System of Construction Vehicle Based on Chaotic Neural Network” [3] Chunsheng Ni, Tongli Lu, Jianwu Zhang, School of Mechanical Engineering, State Key Laboratory for Mechanical System and Vibration Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai, 200240 China.:”Gearshift control for dry dual-clutch transmissions” [4] Muntaser Momani, Mohammed Abuzalata, Igried Al-Khawaldeh and Hisham Al-M ujafet, Department of Mechanical Engineering, Faculty of Engineering Technology, Al-Balqa’ Applied University, Amman, P.O. Box 15008, 11134, Jordan.:” Pneumatic PLC Controlled, Automotive Gear Shifting Mechanism” 175
Descargar ahora