1. Compressor/Generator (Filter Changing)
o Tools Required
Oil filter removing tool (1) Oil Filters (1) Funnel (1)
Air Filters (2) New (1) Old Fuel Filters (1 or 2) 2 Gallon oil
Compressor Oil pan (1) 1 quart Lucas
o Change Filter Intervals:
New Compressor – 500 hours
Old Compressor – 250 hours
Instructions
 Start engine and run for 5 min, then shut off.
 While engine is running, gather replacement filters and tools from locker.
 Compressor: Find rubber hose between trailer and compressor, pull it down.
 Generator:Find rubber hose on the side of the generator, pull it down.
 Remove bolt/cap from hose end.
 Open ball valve on rubber hose.
 Drain oil into oil pan, until it stops.
 Close ball valve on rubber hose.
 Screw bolt/cap back onto hose end.
 Secure hose back between trailer and compressor.
 Open compressor door, look for air filter by itself; fuel filters next to each other, and oil filter. (SEE PICS)
Fig 1. AIR FILTER Fig 2. FUEL FILTERS Fig 3. OIL FILTER
 Clean and/or replace air filters
 Remove and drain old filters into the oil pan.
 Fill the new fuel filters with new diesel fuel; Fill the new oil filter with new oil; Re-install the oil and fuel filters.
 Add 1quart Lucas oil  turn on run for 3 min Shut off
 Check oil dipstick and clean it  fill with oil; reinsert and check fluid level; Add oil as needed and recheck oil
dipstick to verify full.
 Once all complete, LABEL all (3) filters with the next scheduled filter change.
Example(Hours on machine = 443 + 500 = 943 hours will be written on filters)
 Oil disposed into oil drums and all trash into dumpster.