16. IATA Areas ( Traffic Conference Areas ) The Eastern Hemisphere and the Western Hemisphere which are the two parts of the world as per the elementary geography is further divided by IATA into 3 traffic conference areas called IATA Areas or TC1, TC2 and TC3 which comprise of further sub areas TC1 comes under Western Hemisphere ( WH ) TC2 & TC3 comes under Eastern Hemisphere ( EH )
20. Type of Routings/Fares Main Routings/Fares One Way Fares - Some fares are published as one-way fares, which you may use to travel in one direction ( Point A to Point B ) Round Trip Fares- Many fares are published as round trip fares. Often a round trip fare costs less than twice a one-way fare, and indeed, often less than a single one-way fare. Round trip fares generally have more restricted fare rules ( Point A to Point B and back again )
21. Type of Routings/Fares Main Routings/Fares The Open Jaw - An open-jaw flight is one that, in the simplest terms, flies from Point A to Point B, then from Point C to Point A. Points B and C are often neighboring airports, or at least in the same TC ( Traffic Conference ) area. A sample open-jaw itinerary might be a flight from DOH – DXB - - MCT – DOH Another open-jaw scenario is to fly into and out of the same destination city, but your starting and finishing points are different, thus: Fly Point A to Point B; then fly Point B to Point C.
22. Type of Routings/Fares Main Routings/Fares 4.Circle Trip - A circle itinerary typically begins and ends in the same city, but includes at least three separate flights that take you to two or more different cities without the overland portions of the open jaw. Example: Fly from DOH to DXB, then DXB to MCT, then MCT to DOH ( can add Points D, E, F and beyond, but the start and end should be at the origin city – DOH in this example.)
23.
24. IROE -IATA Rate Of Exchange Certain Checks: HIP : Higher rated intermediate points BHC : One Way Backhaul Minimum Check CTM : Circle Trip Minimum Check
25. Basic Fare Construction One Way – Steps and Application FCP – Establish the Fare Construction Point or Fare Break Points 2. NUC – Take the OW Neutral Unit of Construction from the origin to the destination of the fare component using the correct Global Indicator ( check the fare rules and ensure that the itinerary satisfies all conditions, collect stopover/transfer charge –if any ) 3. SR – Check out if the fare component qualifies as a Specified Routing. If it is, ignore the mileage system and take the NUC as the Applicable Fare ( AF ) MPM – Establish the Maximum Permitted Mileage between the fare construction points of the fare component following the same Global Indicator as that used in the NUC ( refer PAT – Passenger Air Tariff )
26. Basic Fare Construction One Way – Steps and Application TPM – Add up the Ticketed Point Mileage of each sector and compare the total TPM to the MPM ( refer PAT – Passenger Air Tariff ) EMA – Deduct the Extra Mileage Allowance, if any, from the total TPM ( refer PAT – Passenger Air Tariff ) 7. EMS – if the EMA is insufficient or not applicable, determine the Excess Mileage Surcharge ( % ) by dividing the TPM by the MPM. Take the result up to 5 decimals ( refer PAT – Passenger Air Tariff )
27. Basic Fare Construction One Way – Steps and Application EMS - Excess Mileage Surcharge ( % )
28. Basic Fare Construction One Way – Steps and Application HIP – Look for the Higher Intermediate Point fare from – 1. Unit origin to intermediate stopover point 2. Intermediate stopover point to another 3. Intermediate stopover point to the unit destination ( check the rules to ensure that the fare qualifies as an HIP, do not collect any additional stopover/transfer charges ) Get the applicable One Way ( OW ) through fare in NUC using above steps
29. Basic Fare Construction One Way – Steps and Application BHC – Apply the Backhaul Check when there is a fare from unit origin to intermediate stopover point is higher than the fare from unit origin to unit destination Calculation: HI Fare - Unit origin to intermediate stopover point Less ( - ) LO Fare - Unit origin to unit destination Equal ( = ) BHD - Backhaul Difference Plus ( + ) HI Fare - Unit origin to intermediate stopover point Equal ( = ) OWM - OW Minimum fare ( check the rules to ensure that the fare qualifies as an HI Fare )
30. Basic Fare Construction One Way – Steps and Application STOPOVER/TRANSFER CHARGE ( S ) – Collect Stopover/transfer charge. Select the charge published in the currency of the country of fare component origin. Convert this into NUC at the applicable IROE Surcharges ( Q ) – Collect Security Surcharges, if any. Convert into NUC at applicable IROE Total – Add up all the NUC’s to get the sum total IROE – Multiply the total NUC by the IATA Rate Of Exchange based on the country of commencement of travel. LCF – Round the resulting Local Currency Fare ( refer the required number of decimal units for the currency )
31. Basic Fare Construction RT/CT – Steps and Application The Round Trip/Circle Trip steps are same as One Way Routing except for the HIP and the check ( CTM )
32. Basic Fare Construction RT/CT – Steps and Application HIP – Look for the Higher Intermediate Point fare from – 1. Unit origin to intermediate stopover point 2. Intermediate stopover point to another ( not applicable to special fare HIP check ) 3. Intermediate stopover point to the unit destination ( check the rules to ensure that the fare qualifies as an HIP, do not collect any additional stopover/transfer charges ) Get the applicable ½ RT through fare in NUC using the above steps
33. Basic Fare Construction RT/CT – Steps and Application CTM – For CT pricing units only. Look for the direct route RT fare from unit origin to the highest rated stopover point. Compare this RT fare to the sum of all of the fare components
34. Examples Exercise:1 One Way Fare Construction without HIP and BHC FCP : NUC : SR: MPM : TPM: EMA: EMS: HIP : ------------ BHC : ------------ Stopover/Transfer Charge ( S ) : Surcharges ( Q ) : Total: IROE: LCF:
35. Examples Exercise:2 One Way Fare Construction with HIP and BHC FCP : NUC : SR: MPM : TPM: EMA: EMS: HIP : BHC : Stopover/Transfer Charge ( S ) : Surcharges ( Q ) : Total: IROE: LCF:
36. Examples Exercise:1 RT/CT Fare Construction without CTM FCP : NUC : SR: MPM : TPM: EMA: EMS: HIP : CTM : -------------- Stopover/Transfer Charge ( S ) : Surcharges ( Q ) : Total: IROE: LCF:
37. Examples Exercise:2 RT/CT Fare Construction with CTM FCP : NUC : SR: MPM : TPM: EMA: EMS: HIP : CTM : Stopover/Transfer Charge ( S ) : Surcharges ( Q ) : Total: IROE: LCF: